한국표준정보망(KSSN)

ASTM Annual Book 수록 리스트

핸드북  >  ASTM

    02.05 : 금속 및 무기질 피막, 금속분말,

  • ASTM B0136-84R13

    Method for:Measurement of Stain Resistance of Anodic Coatings on Aluminum
  • ASTM B0137-95R14

    Test Method for:Measurement of Coating Mass Per Unit Area on Anodically Coated Aluminum
  • ASTM B0177_B0177M-11

    Guide for:Engineering Chromium Electroplating
  • ASTM B0183-79R14

    Practice for:Preparation of Low-Carbon Steel for Electroplating
  • ASTM B0200-85R15

    Specification for:Electrodeposited Coatings of Lead and Lead-Tin Alloys on Steel and Ferrous Alloys
  • ASTM B0201-80R14

    Practice for:Testing Chromate Coatings on Zinc and Cadmium Surfaces
  • ASTM B0212-13

    Test Method for:Apparent Density of Free-Flowing Metal Powders Using the Hall Flowmeter Funnel
  • ASTM B0213-13

    Test Methods for:Flow Rate of Metal Powders Using the Hall Flowmeter Funnel
  • ASTM B0214-15

    Test Method for:Sieve Analysis of Metal Powders
  • ASTM B0215-15

    Practices for:Sampling Metal Powders
  • ASTM B0242-99R14E01

    Guide for:Preparation of High-Carbon Steel for Electroplating
  • ASTM B0243-13

    Terminology of:Powder Metallurgy
  • ASTM B0244-09R14

    Test Method for:Measurement of Thickness of Anodic Coatings on Aluminum and of Other Nonconductive Coatings on Nonmagnetic Basis Metals with Eddy-Current Instruments
  • ASTM B0252-92R14

    Guide for:Preparation of Zinc Alloy Die Castings for Electroplating and Conversion Coatings
  • ASTM B0253-11

    Guide for:Preparation of Aluminum Alloys for Electroplating
  • ASTM B0254-92R14

    Practice for:Preparation of and Electroplating on Stainless Steel
  • ASTM B0276-05R15

    Test Method for:Apparent Porosity in Cemented Carbides
  • ASTM B0281-88R13

    Practice for:Preparation of Copper and Copper-Base Alloys for Electroplating and Conversion Coatings
  • ASTM B0294-10

    Test Method for:Hardness Testing of Cemented Carbides
  • ASTM B0311-13

    Test Method for:Density of Powder Metallurgy (PM) Materials Containing Less Than Two Percent Porosity
  • ASTM B0312-14

    Test Method for:Green Strength of Specimens Compacted from Metal Powders
  • ASTM B0319-91R14

    Guide for:Preparation of Lead and Lead Alloys for Electroplating
  • ASTM B0320-60R13

    Practice for:Preparation of Iron Castings for Electroplating
  • ASTM B0322-99R14

    Guide for:Cleaning Metals Prior to Electroplating
  • ASTM B0329-14

    Test Method for:Apparent Density of Metal Powders and Compounds Using the Scott Volumeter
  • ASTM B0330-15

    Test Methods for:Estimating Average Particle Size of Metal Powders and Related Compounds Using Air Permeability
  • ASTM B0331-10

    Test Method for:Compressibility of Metal Powders in Uniaxial Compaction
  • ASTM B0343-92AR14

    Practice for:Preparation of Nickel for Electroplating with Nickel
  • ASTM B0368-09R14

    Test Method for:Copper-Accelerated Acetic Acid-Salt Spray (Fog) Testing (CASS Test)
  • ASTM B0374-06R11

    Terminology Relating to:Electroplating
  • ASTM B0380-97R13

    Test Method for:Corrosion Testing of Decorative Electrodeposited Coatings by the Corrodkote Procedure
  • ASTM B0406-96R15

    Test Method for:Transverse Rupture Strength of Cemented Carbides
  • ASTM B0417-13

    Test Method for:Apparent Density of Non-Free-Flowing Metal Powders Using the Carney Funnel
  • ASTM B0438-13

    Specification for:Bronze-Base Powder Metallurgy (PM) Bearings (Oil-Impregnated)
  • ASTM B0439-12

    Specification for:Iron-Base Powder Metallurgy (PM) Bearings (Oil-Impregnated)
  • ASTM B0449-93R15

    Specification for:Chromates on Aluminum
  • ASTM B0456-11E01

    Specification for:Electrodeposited Coatings of Copper Plus Nickel Plus Chromium and Nickel Plus Chromium
  • ASTM B0457-67R13

    Test Method for:Measurement of Impedance of Anodic Coatings on Aluminum
  • ASTM B0480-88R10

    Guide for:Preparation of Magnesium and Magnesium Alloys for Electroplating
  • ASTM B0481-68R13

    Practice for:Preparation of Titanium and Titanium Alloys for Electroplating
  • ASTM B0482-85R13

    Practice for:Preparation of Tungsten and Tungsten Alloys for Electroplating
  • ASTM B0487-85R13

    Test Method for:Measurement of Metal and Oxide Coating Thickness by Microscopical Examination of Cross Section
  • ASTM B0488-11

    Specification for:Electrodeposited Coatings of Gold for Engineering Uses
  • ASTM B0489-85R13

    Practice for:Bend Test for Ductility of Electrodeposited and Autocatalytically Deposited Metal Coatings on Metals
  • ASTM B0490-09R14

    Practice for:Micrometer Bend Test for Ductility of Electrodeposits
  • ASTM B0499-09R14

    Test Method for:Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals
  • ASTM B0504-90R11

    Test Method for:Measurement of Thickness of Metallic Coatings by the Coulometric Method
  • ASTM B0507-14

    Practice for:Design of Articles to Be Electroplated on Racks
  • ASTM B0527-15

    Test Method for:Tap Density of Metal Powders and Compounds
  • ASTM B0528-12

    Test Method for:Transverse Rupture Strength of Powder Metallurgy (PM) Specimens
  • ASTM B0530-09R14

    Test Method for:Measurement of Coating Thicknesses by the Magnetic Method: Electrodeposited Nickel Coatings on Magnetic and Nonmagnetic Substrates
  • ASTM B0532-85R14

    Specification for:Appearance of Electroplated Plastic Surfaces
  • ASTM B0533-85R13

    Test Method for:Peel Strength of Metal Electroplated Plastics
  • ASTM B0537-70R13

    Practice for:Rating of Electroplated Panels Subjected to Atmospheric Exposure
  • ASTM B0545-13

    Specification for:Electrodeposited Coatings of Tin
  • ASTM B0555-86R13

    Guide for:Measurement of Electrodeposited Metallic Coating Thicknesses by Dropping Test
  • ASTM B0556-90R13

    Guide for:Measurement of Thin Chromium Coatings by Spot Test
  • ASTM B0558-79R13

    Practice for:Preparation of Nickel Alloys for Electroplating
  • ASTM B0567-98R14

    Test Method for:Measurement of Coating Thickness by the Beta Backscatter Method
  • ASTM B0568-98R14

    Test Method for:Measurement of Coating Thickness by X-Ray Spectrometry
  • ASTM B0571-97R13

    Practice for:Qualitative Adhesion Testing of Metallic Coatings
  • ASTM B0578-87R15

    Test Method for:Microhardness of Electroplated Coatings
  • ASTM B0579-73R15

    Specification for:Electrodeposited Coatings of Tin-Lead Alloy (Solder Plate)
  • ASTM B0580-79R14

    Specification for:Anodic Oxide Coatings on Aluminum
  • ASTM B0588-88R10

    Test Method for:Measurement of Thickness of Transparent or Opaque Coatings by Double-Beam Interference Microscope Technique
  • ASTM B0595-11

    Specification for:Sintered Aluminum Structural Parts
  • ASTM B0602-88R10

    Test Method for:Attribute Sampling of Metallic and Inorganic Coatings
  • ASTM B0604-91R15

    Specification for:Decorative Electroplated Coatings of Copper Plus Nickel Plus Chromium on Plastics
  • ASTM B0605-95AR15

    Specification for:Electrodeposited Coatings of Tin-Nickel Alloy
  • ASTM B0607-15

    Specification for:Autocatalytic Nickel Boron Coatings for Engineering Use
  • ASTM B0610-13

    Test Method for:Measuring Dimensional Changes Associated with Processing Metal Powders
  • ASTM B0629-77R13

    Practice for:Preparation of Molybdenum and Molybdenum Alloys for Electroplating
  • ASTM B0630-88R10

    Practice for:Preparation of Chromium for Electroplating with Chromium
  • ASTM B0633-15

    Specification for:Electrodeposited Coatings of Zinc on Iron and Steel
  • ASTM B0634-14A

    Specification for:Electrodeposited Coatings of Rhodium for Engineering Use
  • ASTM B0635-00R15

    Specification for:Coatings of Cadmium-Tin Mechanically Deposited
  • ASTM B0636_B0636M-15

    Test Method for:Measurement of Internal Stress of Plated Metallic Coatings with the Spiral Contractometer
  • ASTM B0650-95R13

    Specification for:Electrodeposited Engineering Chromium Coatings on Ferrous Substrates
  • ASTM B0651-83R15

    Test Method for:Measurement of Corrosion Sites in Nickel Plus Chromium or Copper Plus Nickel Plus Chromium Electroplated Surfaces with Double-Beam Interference Microscope
  • ASTM B0657-11

    Guide for:Metallographic Identification of Microstructure in Cemented Carbides
  • ASTM B0659-90R14

    Guide for:Measuring Thickness of Metallic and Inorganic Coatings
  • ASTM B0665-08R12

    Guide for:Metallographic Sample Preparation of Cemented Tungsten Carbides
  • ASTM B0678-86R11

    Test Method for:Solderability of Metallic-Coated Products
  • ASTM B0679-98R15

    Specification for:Electrodeposited Coatings of Palladium for Engineering Use
  • ASTM B0680-80R14

    Test Method for:Seal Quality of Anodic Coatings on Aluminum by Acid Dissolution
  • ASTM B0689-97R13

    Specification for:Electroplated Engineering Nickel Coatings
  • ASTM B0695-04R09

    Specification for:Coatings of Zinc Mechanically Deposited on Iron and Steel
  • ASTM B0696-00R15

    Specification for:Coatings of Cadmium Mechanically Deposited
  • ASTM B0697-88R10

    Guide for:Selection of Sampling Plans for Inspection of Electrodeposited Metallic and Inorganic Coatings
  • ASTM B0699-86R15

    Specification for:Coatings of Cadmium Vacuum-Deposited on Iron and Steel
  • ASTM B0700-08R14

    Specification for:Electrodeposited Coatings of Silver for Engineering Use
  • ASTM B0703-10

    Test Method for:Apparent Density of Metal Powders and Related Compounds Using the Arnold Meter
  • ASTM B0727-04R14

    Practice for:Preparation of Plastics Materials for Electroplating
  • ASTM B0733-15

    Specification for:Autocatalytic (Electroless) Nickel-Phosphorus Coatings on Metal
  • ASTM B0734-97R13

    Specification for:Electrodeposited Copper for Engineering Uses
  • ASTM B0748-90R10

    Test Method for:Measurement of Thickness of Metallic Coatings by Measurement of Cross Section with a Scanning Electron Microscope
  • ASTM B0761-06R11

    Test Method for:Particle Size Distribution of Metal Powders and Related Compounds by X-Ray Monitoring of Gravity Sedimentation
  • ASTM B0762-90R10

    Test Method of:Variables Sampling of Metallic and Inorganic Coatings
  • ASTM B0764-04R14

    Test Method for:Simultaneous Thickness and Electrode Potential Determination of Individual Layers in Multilayer Nickel Deposit (STEP Test)
  • ASTM B0765-03R13

    Guide for:Selection of Porosity and Gross Defect Tests for Electrodeposits and Related Metallic Coatings
  • ASTM B0766-86R15

    Specification for:Electrodeposited Coatings of Cadmium
  • ASTM B0767-88R10

    Guide for:Determining Mass Per Unit Area of Electrodeposited and Related Coatings by Gravimetric and Other Chemical Analysis Procedures
  • ASTM B0771-11E01

    Test Method for:Short Rod Fracture Toughness of Cemented Carbides
  • ASTM B0783-13

    Specification for:Materials for Ferrous Powder Metallurgy (PM) Structural Parts
  • ASTM B0795-13

    Test Method for:Determining the Percentage of Alloyed or Unalloyed Iron Contamination Present in Powder Forged (PF) Steel Materials
  • ASTM B0796-14

    Test Method for:Nonmetallic Inclusion Content of Ferrous Powders Intended for Powder Forging (PF) Applications
  • ASTM B0797-15

    Test Method for:Surface Finger-Oxide Penetration Depth and Presence of Interparticle Oxide Networks in Powder Forged (PF) Steel Parts
  • ASTM B0809-95R13

    Test Method for:Porosity in Metallic Coatings by Humid Sulfur Vapor (“Flowers-of-Sulfur”)
  • ASTM B0816-00R15

    Specification for:Coatings of Cadmium-Zinc Mechanically Deposited
  • ASTM B0817

    Specification for:Powder Metallurgy (PM) Titanium Alloy Structural Components
  • ASTM B0821-10

    Guide for:Liquid Dispersion of Metal Powders and Related Compounds for Particle Size Analysis
  • ASTM B0822-10

    Test Method for:Particle Size Distribution of Metal Powders and Related Compounds by Light Scattering
  • ASTM B0823-15

    Specification for:Materials for Copper Base Powder Metallurgy (PM) Structural Parts
  • ASTM B0832-93R13

    Guide for:Electroforming with Nickel and Copper
  • ASTM B0839-04R14

    Test Method for:Residual Embrittlement in Metallic Coated, Externally Threaded Articles, Fasteners, and Rod-Inclined Wedge Method
  • ASTM B0840-15

    Specification for:Electrodeposited Coatings of Zinc Cobalt Alloy Deposits
  • ASTM B0841-99R10

    Specification for:Electrodeposited Coatings of Zinc Nickel Alloy Deposits
  • ASTM B0842-99R11

    Specification for:Electrodeposited Coatings of Zinc Iron Alloy Deposits
  • ASTM B0848-15

    Specification for:Powder Forged (PF) Ferrous Materials
  • ASTM B0849-02R13

    Specification for:Pre-Treatments of Iron or Steel for Reducing Risk of Hydrogen Embrittlement
  • ASTM B0850-98R15

    Guide for:Post-Coating Treatments of Steel for Reducing the Risk of Hydrogen Embrittlement
  • ASTM B0851-04R14

    Specification for:Automated Controlled Shot Peening of Metallic Articles Prior to Nickel, Autocatalytic Nickel, or Chromium Plating, or as Final Finish
  • ASTM B0853-12

    Specification for:Powder Metallurgy (PM) Boron Stainless Steel Structural Components
  • ASTM B0855-11

    Test Method for:Volumetric Flow Rate of Metal Powders Using the Arnold Meter and Hall Flowmeter Funnel
  • ASTM B0859-13

    Practice for:De-Agglomeration of Refractory Metal Powders and Their Compounds Prior to Particle Size Analysis
  • ASTM B0866-95R13

    Test Method for:Gross Defects and Mechanical Damage in Metallic Coatings by Polysulfide Immersion
  • ASTM B0867-95R13

    Specification for:Electrodeposited Coatings of Palladium-Nickel for Engineering Use
  • ASTM B0873-12

    Test Method for:Measuring Volume of Apparent Density Cup Used in Test Methods B 212, B 329, and B 417
  • ASTM B0874-96R13

    Specification for:Chromium Diffusion Coating Applied by Pack Cementation Process
  • ASTM B0875-96R13

    Specification for:Aluminum Diffusion Coating Applied by Pack Cementation Process
  • ASTM B0877-96R13

    Test Method for:Gross Defects and Mechanical Damage in Metallic Coatings by the Phosphomolybdic Acid (PMA) Method
  • ASTM B0879-97R13

    Practice for:Applying Non-Electrolytic Conversion Coatings on Magnesium and Magnesium Alloys
  • ASTM B0883-15

    Specification for:Metal Injection Molded (MIM) Materials
  • ASTM B0886-12

    Test Method for:Determination of Magnetic Saturation (Ms) of Cemented Carbides
  • ASTM B0887-12

    Test Method for:Determination of Coercivity (Hcs) of Cemented Carbides
  • ASTM B0890-07R12

    Test Method for:Determination of Metallic Constituents of Tungsten Alloys and Tungsten Hardmetals by X-Ray Fluorescence Spectrometry
  • ASTM B0893-98R13

    Specification for:Hard-Coat Anodizing of Magnesium for Engineering Applications
  • ASTM B0895-15

    Test Methods for:Evaluating the Corrosion Resistance of Stainless Steel Powder Metallurgy (PM) Parts/Specimens by Immersion in a Sodium Chloride Solution
  • ASTM B0904-00R14

    Specification for:Autocatalytic Nickel over Autocatalytic Copper for Electromagnetic Interference Shielding
  • ASTM B0905-00R10

    Test Methods for:Assessing the Adhesion of Metallic and Inorganic Coatings by the Mechanized Tape Test
  • ASTM B0912-02R13

    Specification for:Passivation of Stainless Steels Using Electropolishing
  • ASTM B0915-01R13E01

    Test Method for:Measuring Static Heat Resistance of Self-Cleaning Oven Coating
  • ASTM B0916-01R13E01

    Test Method for:Adherence of Porcelain Enamel Coatings to Sheet Metal
  • ASTM B0921-08R13

    Specification for:Non-hexavalent Chromium Conversion Coatings on Aluminum and Aluminum Alloys
  • ASTM B0922-10

    Test Method for:Metal Powder Specific Surface Area by Physical Adsorption
  • ASTM B0923-10

    Test Method for:Metal Powder Skeletal Density by Helium or Nitrogen Pycnometry
  • ASTM B0925-15

    Practices for:Production and Preparation of Powder Metallurgy (PM) Test Specimens
  • ASTM B0930-03R12

    Test Method for:Rating Grain Size and Frequency of Abnormally Large Grains in Cemented Tungsten Carbides (Hardmetals)
  • ASTM B0931-14

    Test Method for:Metallographically Estimating the Observed Case Depth of Ferrous Powder Metallurgy (PM) Parts
  • ASTM B0933-14

    Test Method for:Microindentation Hardness of Powder Metallurgy (PM) Materials
  • ASTM B0934-15

    Test Method for:Effective Case Depth of Ferrous Powder Metallurgy (PM) Parts Using Microindentation Hardness Measurements
  • ASTM B0935-05R09E01

    Guide for:Steam Treatment of Ferrous Powder Metallurgy (PM) Materials
  • ASTM B0939-15

    Test Method for:Radial Crushing Strength, K, of Powder Metallurgy (PM) Bearings and Structural Materials
  • ASTM B0940-05R14

    Practice for:Testing Non-Chromate Coatings on Zinc and Cadmium Surfaces
  • ASTM B0946-11

    Test Method for:Surface Finish of Powder Metallurgy (PM) Products
  • ASTM B0962-15

    Test Methods for:Density of Compacted or Sintered Powder Metallurgy (PM) Products Using Archimedes’ Principle
  • ASTM B0963-14

    Test Methods for:Oil Content, Oil-Impregnation Efficiency, and Surface-Connected Porosity of Sintered Powder Metallurgy (PM) Products Using Archimedes’ Principle
  • ASTM B0964-09

    Test Methods for:Flow Rate of Metal Powders Using the Carney Funnel
  • ASTM B0966

    Test Method for:Permeability of Powder Metallurgy (PM) Bearings Using Nitrogen Gas
  • ASTM B0970-09

    Test Method for:Cleanliness of Powder Metallurgy (PM) Bearings and Structural Parts
  • ASTM B0975-15

    Test Method for:Measurement of Internal Stress of Metallic Coatings by Split Strip Evaluation (Deposit Stress Analyzer Method)
  • ASTM B0984-12

    Specification for:Electrodeposited Coatings of Palladium- Cobalt Alloy for Engineering Use
  • ASTM B0988-13

    Specification for:Powder Metallurgy (PM) Titanium and Titanium Alloy Structural Components
  • ASTM B0994_B0994M-15

    Specification for:Nickel-Cobalt Alloy Coating
  • ASTM B0995-15A

    Test Method for:Chloride Resistance Test for Chromium Electroplated Parts (Russian Mud Test)
  • ASTM B0999-15

    Specification for:Titanium and Titanium Alloys Plating, Electrodeposited Coatings of Titanium and Titanium Alloys on Conductive and Non-Conductive Substrate
  • ASTM B1000-15

    Practices for:Casting Preparation and Test Procedure of Porcelain Enamel-lined Pipe, Fittings, and Valves for Use in the Municipal Wastewater, Sewage, and Water Treatment Industry
  • ASTM C0282-10R15

    Test Method for:Acid Resistance of Porcelain Enamels(Citric Acid Spot Test)
  • ASTM C0283-13

    Test Methods for:Resistance of Porcelain Enameled Utensils to Boiling Acid
  • ASTM C0285-10R15E01

    Test Methods for:Sieve Analysis of Wet-Milled and Dry-Milled Porcelain Enamel
  • ASTM C0286-99R09

    Terminology Relating to:Porcelain Enamel and Ceramic-Metal Systems
  • ASTM C0346-87R14

    Test Method for:45-deg Specular Gloss of Ceramic Materials
  • ASTM C0374-14R15E01

    Test Methods for:Fusion Flow of Porcelain Enamel Frits (Flow-Button Methods)
  • ASTM C0375-58R11E01

    Classification of:Water Used in Milling of Porcelain Enamel
  • ASTM C0385-58R14

    Test Method for:Thermal Shock Resistance of Porcelain-Enameled Utensils
  • ASTM C0448-88R11E01

    Test Methods for:Abrasion Resistance of Porcelain Enamels
  • ASTM C0536-83R14E01

    Test Method for:Continuity of Coatings in Glassed Steel Equipment by Electrical Testing
  • ASTM C0537-87R14E01

    Test Method for:Reliability of Glass Coatings on Glassed Steel Reaction Equipment by High Voltage
  • ASTM C0538-83R14E01

    Test Method for:Color Retention of Red, Orange, and Yellow Porcelain Enamels
  • ASTM C0539-84R11

    Test Method for:Linear Thermal Expansion of Porcelain Enamel and Glaze Frits and Ceramic Whiteware Materials by Interferometric Method
  • ASTM C0614-10R15

    Test Method for:Alkali Resistance of Porcelain Enamels
  • ASTM C0632-88R11E01

    Test Method for:Reboiling Tendency of Sheet Steel for Porcelain Enameling
  • ASTM C0633-13

    Test Method for:Adhesion or Cohesion Strength of Thermal Spray Coatings
  • ASTM C0660-81R15

    Practices for:Production and Preparation of Gray Iron Castings for Porcelain Enameling
  • ASTM C0664-10R15

    Test Methods for:Thickness of Diffusion Coating
  • ASTM C0694-90AR11E01

    Test Method for:Weight Loss (Mass Loss) of Sheet Steel During Immersion in Sulfuric Acid Solution
  • ASTM C0703-72R11E01

    Test Methods for:Spalling Resistance of Porcelain Enameled Aluminum
  • ASTM C0715-90R11E01

    Test Method for:Nickel on Steel for Porcelain Enameling by Photometric Analysis
  • ASTM C0743-87R14E01

    Test Method for:Continuity of Porcelain Enamel Coatings
  • ASTM C0756-87R11E01

    Test Method for:Cleanability of Surface Finishes
  • ASTM C0774-88R11E01

    Test Method for:Yield Strength of Enameling Steels After Straining and Firing
  • ASTM C0810-90R11E01

    Test Method for:Nickel on Steel for Porcelain Enameling by X-Ray Emission Spectrometry
  • ASTM C0839-82R15

    Test Method for:Compressive Stress of Porcelain Enamels by Loaded-Beam Method
  • ASTM C0872-10R15

    Test Method for:Lead and Cadmium Release from Porcelain Enamel Surfaces
  • ASTM D1730-09R14

    Practices for:Preparation of Aluminum and Aluminum-Alloy Surfaces for Painting
  • ASTM D1731-09R14

    Practices for:Preparation of Hot-Dip Aluminum Surfaces for Painting
  • ASTM D1732-03R13

    Practices for:Preparation of Magnesium Alloy Surfaces for Painting
  • ASTM E0159-10

    Test Method for:Loss of Mass in a Reducing Gas Atmosphere for Cobalt, Copper, Tungsten, and Iron Powders (Hydrogen Loss)
  • ASTM E0194-10R15

    Test Method for:Acid-Insoluble Content of Copper and Iron Powders
  • ASTM E1338-09R15

    Guide for:Identification of Metals and Alloys in Computerized Material Property Databases