한국표준정보망(KSSN)

ASTM Annual Book 수록 리스트

핸드북  >  ASTM

    04.02 : 콘크리트 및 골재

  • ASTM C0029_C0029M-09

    Test Method for:Bulk Density (“Unit Weight”) and Voids in Aggregate
  • ASTM C0031_C0031M-15A

    Practice for:Making and Curing Concrete Test Specimens in the Field
  • ASTM C0033_C0033M-13

    Specification for:Concrete Aggregates
  • ASTM C0039_C0039M-15A

    Test Method for:Compressive Strength of Cylindrical Concrete Specimens
  • ASTM C0040_C0040M-11

    Test Method for:Organic Impurities in Fine Aggregates for Concrete
  • ASTM C0042_C0042M-13

    Test Method for:Obtaining and Testing Drilled Cores and Sawed Beams of Concrete
  • ASTM C0070-13

    Test Method for:Surface Moisture in Fine Aggregate
  • ASTM C0078_C0078M-15B

    Test Method for:Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading)
  • ASTM C0087_C0087M-10

    Test Method for:Effect of Organic Impurities in Fine Aggregate on Strength of Mortar
  • ASTM C0088-13

    Test Method for:Soundness of Aggregates by Use of Sodium Sulfate or Magnesium Sulfate
  • ASTM C0094_C0094M-15A

    Specification for:Ready-Mixed Concrete
  • ASTM C0117-13

    Test Method for:Materials Finer than 75-μm (No. 200) Sieve in Mineral Aggregates by Washing
  • ASTM C0123_C0123M-14

    Test Method for:Lightweight Particles in Aggregate
  • ASTM C0125-15A

    Terminology Relating to:Concrete and Concrete Aggregates
  • ASTM C0127-15

    Test Method for:Relative Density (Specific Gravity) and Absorption of Coarse Aggregate
  • ASTM C0128-15

    Test Method for:Relative Density (Specific Gravity) and Absorption of Fine Aggregate
  • ASTM C0131_C0131M-14

    Test Method for:Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine
  • ASTM C0136_C0136M-14

    Test Method for:Sieve Analysis of Fine and Coarse Aggregates
  • ASTM C0138_C0138M-14

    Test Method for:Density (Unit Weight), Yield, and Air Content (Gravimetric) of Concrete
  • ASTM C0142_C0142M-10

    Test Method for:Clay Lumps and Friable Particles in Aggregates
  • ASTM C0143_C0143M-15

    Test Method for:Slump of Hydraulic-Cement Concrete
  • ASTM C0156-11

    Test Method for:Water Loss [from a Mortar Specimen] Through Liquid Membrane-Forming Curing Compounds for Concrete
  • ASTM C0157_C0157M-08R14E01

    Test Method for:Length Change of Hardened Hydraulic-Cement Mortar and Concrete
  • ASTM C0171-07

    Specification for:Sheet Materials for Curing Concrete
  • ASTM C0172_C0172M-14A

    Practice for:Sampling Freshly Mixed Concrete
  • ASTM C0173_C0173M-14

    Test Method for:Air Content of Freshly Mixed Concrete by the Volumetric Method
  • ASTM C0174_C0174M-13

    Test Method for:Measuring Thickness of Concrete Elements Using Drilled Concrete Cores
  • ASTM C0192_C0192M-15

    Practice for:Making and Curing Concrete Test Specimens in the Laboratory
  • ASTM C0215-14

    Test Method for:Fundamental Transverse, Longitudinal, and Torsional Resonant Frequencies of Concrete Specimens
  • ASTM C0227-10

    Test Method for:Potential Alkali Reactivity of Cement-Aggregate Combinations (Mortar-Bar Method)
  • ASTM C0231_C0231M-14

    Test Method for:Air Content of Freshly Mixed Concrete by the Pressure Method
  • ASTM C0232_C0232M-14

    Test Method for:Bleeding of Concrete
  • ASTM C0233_C0233M-14

    Test Method for:Air-Entraining Admixtures for Concrete
  • ASTM C0260_C0260M-10A

    Specification for:Air-Entraining Admixtures for Concrete
  • ASTM C0289

    Test Method for:Potential Alkali-Silica Reactivity of Aggregates (Chemical Method)
  • ASTM C0293_C0293M-10

    Test Method for:Flexural Strength of Concrete (Using Simple Beam With Center-Point Loading)
  • ASTM C0294-12

    Descriptive Nomenclature for:Constituents of Concrete Aggregates
  • ASTM C0295_C0295M-12

    Guide for:Petrographic Examination of Aggregates for Concrete
  • ASTM C0309-11

    Specification for:Liquid Membrane-Forming Compounds for Curing Concrete
  • ASTM C0311_C0311M-13

    Test Methods for:Sampling and Testing Fly Ash or Natural Pozzolans for Use in Portland-Cement Concrete
  • ASTM C0330_C0330M-14

    Specification for:Lightweight Aggregates for Structural Concrete
  • ASTM C0331_C0331M-14

    Specification for:Lightweight Aggregates for Concrete Masonry Units
  • ASTM C0332-09

    Specification for:Lightweight Aggregates for Insulating Concrete
  • ASTM C0341_C0341M-13

    Practice for:Preparation and Conditioning of Cast, Drilled, or Sawed Specimens of Hydraulic-Cement Mortar and Concrete Used for Length Change Measurements
  • ASTM C0387_C0387M-15

    Specification for:Packaged, Dry, Combined Materials for Concrete and High Strength Mortar
  • ASTM C0403_C0403M-08

    Test Method for:Time of Setting of Concrete Mixtures by Penetration Resistance
  • ASTM C0418-12

    Test Method for:Abrasion Resistance of Concrete by Sandblasting
  • ASTM C0441_C0441M-11

    Test Method for:Effectiveness of Pozzolans or Ground Blast-Furnace Slag in Preventing Excessive Expansion of Concrete Due to the Alkali-Silica Reaction
  • ASTM C0457_C0457M-12

    Test Method for:Microscopical Determination of Parameters of the Air-Void System in Hardened Concrete
  • ASTM C0469_C0469M-14

    Test Method for:Static Modulus of Elasticity and Poisson's Ratio of Concrete in Compression
  • ASTM C0470_C0470M-15

    Specification for:Molds for Forming Concrete Test Cylinders Vertically
  • ASTM C0494_C0494M-15A

    Specification for:Chemical Admixtures for Concrete
  • ASTM C0495_C0495M-12

    Test Method for:Compressive Strength of Lightweight Insulating Concrete
  • ASTM C0496_C0496M-11

    Test Method for:Splitting Tensile Strength of Cylindrical Concrete Specimens
  • ASTM C0512_C0512M-15

    Test Method for:Creep of Concrete in Compression
  • ASTM C0513_C0513M-11E01

    Test Method for:Obtaining and Testing Specimens of Hardened Lightweight Insulating Concrete for Compressive Strength
  • ASTM C0535-12

    Test Method for:Resistance to Degradation of Large-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine
  • ASTM C0566-13

    Test Method for:Total Evaporable Moisture Content of Aggregate by Drying
  • ASTM C0567_C0567M-14

    Test Method for:Determining Density of Structural Lightweight Concrete
  • ASTM C0586-11

    Test Method for:Potential Alkali Reactivity of Carbonate Rocks as Concrete Aggregates (Rock-Cylinder Method)
  • ASTM C0597-09

    Test Method for:Pulse Velocity Through Concrete
  • ASTM C0617_C0617M-15

    Practice for:Capping Cylindrical Concrete Specimens
  • ASTM C0618-15

    Specification for:Coal Fly Ash and Raw or Calcined Natural Pozzolan for Use in Concrete
  • ASTM C0637-14

    Specification for:Aggregates for Radiation-Shielding Concrete
  • ASTM C0638-14

    Descriptive Nomenclature of:Constituents of Aggregates for Radiation-Shielding Concrete
  • ASTM C0641-09

    Test Method for:Iron Staining Materials in Lightweight Concrete Aggregates
  • ASTM C0642-13

    Test Method for:Density, Absorption, and Voids in Hardened Concrete
  • ASTM C0666_C0666M-15

    Test Method for:Resistance of Concrete to Rapid Freezing and Thawing
  • ASTM C0670-15

    Practice for:Preparing Precision and Bias Statements for Test Methods for Construction Materials
  • ASTM C0672_C0672M-12

    Test Method for:Scaling Resistance of Concrete Surfaces Exposed to Deicing Chemicals
  • ASTM C0685_C0685M-14

    Specification for:Concrete Made by Volumetric Batching and Continuous Mixing
  • ASTM C0702_C0702M-11

    Practice for:Reducing Samples of Aggregate to Testing Size
  • ASTM C0779_C0779M-12

    Test Method for:Abrasion Resistance of Horizontal Concrete Surfaces
  • ASTM C0796_C0796M-12

    Test Method for:Foaming Agents for Use in Producing Cellular Concrete Using Preformed Foam
  • ASTM C0802-14

    Practice for:Conducting an Interlaboratory Test Program to Determine the Precision of Test Methods for Construction Materials
  • ASTM C0803_C0803M-03R10

    Test Method for:Penetration Resistance of Hardened Concrete
  • ASTM C0805_C0805M-13A

    Test Method for:Rebound Number of Hardened Concrete
  • ASTM C0823_C0823M-12

    Practice for:Examination and Sampling of Hardened Concrete in Constructions
  • ASTM C0827_C0827M-10

    Test Method for:Change in Height at Early Ages of Cylindrical Specimens of Cementitious Mixtures
  • ASTM C0856-14

    Practice for:Petrographic Examination of Hardened Concrete
  • ASTM C0869_C0869M-11

    Specification for:Foaming Agents Used in Making Preformed Foam for Cellular Concrete
  • ASTM C0873_C0873M-10A

    Test Method for:Compressive Strength of Concrete Cylinders Cast in Place in Cylindrical Molds
  • ASTM C0878_C0878M-14A

    Test Method for:Restrained Expansion of Shrinkage-Compensating Concrete
  • ASTM C0881_C0881M-14

    Specification for:Epoxy-Resin-Base Bonding Systems for Concrete
  • ASTM C0882_C0882M-13A

    Test Method for:Bond Strength of Epoxy-Resin Systems Used With Concrete By Slant Shear
  • ASTM C0884_C0884M-98R10

    Test Method for:Thermal Compatibility Between Concrete and an Epoxy-Resin Overlay
  • ASTM C0900-15

    Test Method for:Pullout Strength of Hardened Concrete
  • ASTM C0918_C0918M-13

    Test Method for:Measuring Early-Age Compressive Strength and Projecting Later-Age Strength
  • ASTM C0928_C0928M-13

    Specification for:Packaged, Dry, Rapid-Hardening Cementitious Materials for Concrete Repairs
  • ASTM C0937-10

    Specification for:Grout Fluidifier for Preplaced-Aggregate Concrete
  • ASTM C0938-10

    Practice for:Proportioning Grout Mixtures for Preplaced-Aggregate Concrete
  • ASTM C0939-10

    Test Method for:Flow of Grout for Preplaced-Aggregate Concrete (Flow Cone Method)
  • ASTM C0940-10A

    Test Method for:Expansion and Bleeding of Freshly Mixed Grouts for Preplaced-Aggregate Concrete in the Laboratory
  • ASTM C0941-10

    Test Method for:Water Retentivity of Grout Mixtures for Preplaced-Aggregate Concrete in the Laboratory
  • ASTM C0942-15

    Test Method for:Compressive Strength of Grouts for Preplaced-Aggregate Concrete in the Laboratory
  • ASTM C0943-10

    Practice for:Making Test Cylinders and Prisms for Determining Strength and Density of Preplaced-Aggregate Concrete in the Laboratory
  • ASTM C0944_C0944M-12

    Test Method for:Abrasion Resistance of Concrete or Mortar Surfaces by the Rotating-Cutter Method
  • ASTM C0953-10

    Test Method for:Time of Setting of Grouts for Preplaced-Aggregate Concrete in the Laboratory
  • ASTM C0979_C0979M-10

    Specification for:Pigments for Integrally Colored Concrete
  • ASTM C0989_C0989M-14

    Specification for:Slag Cement for Use in Concrete and Mortars
  • ASTM C1017_C1017M-13E01

    Specification for:Chemical Admixtures for Use in Producing Flowing Concrete
  • ASTM C1040_C1040M-08R13

    Test Methods for:In-Place Density of Unhardened and Hardened Concrete, Including Roller Compacted Concrete, By Nuclear Methods
  • ASTM C1059_C1059M-13

    Specification for:Latex Agents for Bonding Fresh To Hardened Concrete
  • ASTM C1064_C1064M-12

    Test Method for:Temperature of Freshly Mixed Hydraulic-Cement Concrete
  • ASTM C1067-12

    Practice for:Conducting a Ruggedness Evaluation or Screening Program for Test Methods for Construction Materials
  • ASTM C1073-12

    Test Method for:Hydraulic Activity of Slag Cement by Reaction with Alkali
  • ASTM C1074-11

    Practice for:Estimating Concrete Strength by the Maturity Method
  • ASTM C1077-15A

    Practice for:Agencies Testing Concrete and Concrete Aggregates for Use in Construction and Criteria for Testing Agency Evaluation
  • ASTM C1084-10

    Test Method for:Portland-Cement Content of Hardened Hydraulic-Cement Concrete
  • ASTM C1090-10

    Test Method for:Measuring Changes in Height of Cylindrical Specimens of Hydraulic-Cement Grout
  • ASTM C1105-08A

    Test Method for:Length Change of Concrete Due to Alkali-Carbonate Rock Reaction
  • ASTM C1107_C1107M-14A

    Specification for:Packaged Dry, Hydraulic-Cement Grout (Nonshrink)
  • ASTM C1116_C1116M-10AR15

    Specification for:Fiber-Reinforced Concrete
  • ASTM C1138M-12

    Test Method for:Abrasion Resistance of Concrete (Underwater Method)
  • ASTM C1140_C1140M-11

    Practice for:Preparing and Testing Specimens from Shotcrete Test Panels
  • ASTM C1141_C1141M-08

    Specification for:Admixtures for Shotcrete
  • ASTM C1152_C1152M-04R12E01

    Test Method for:Acid-Soluble Chloride in Mortar and Concrete
  • ASTM C1170_C1170M-14E01

    Test Method for:Determining Consistency and Density of Roller-Compacted Concrete Using a Vibrating Table
  • ASTM C1176_C1176M-13

    Practice for:Making Roller-Compacted Concrete in Cylinder Molds Using a Vibrating Table
  • ASTM C1181-00R12

    Test Methods for:Compressive Creep of Chemical-Resistant Polymer Machinery Grouts
  • ASTM C1202-12

    Test Method for:Electrical Indication of Concrete's Ability to Resist Chloride Ion Penetration
  • ASTM C1218_C1218M-15

    Test Method for:Water-Soluble Chloride in Mortar and Concrete
  • ASTM C1231_C1231M-14

    Practice for:Use of Unbonded Caps in Determination of Compressive Strength of Hardened Concrete Cylinders
  • ASTM C1240-15

    Specification for:Silica Fume Used in Cementitious Mixtures
  • ASTM C1245_C1245M-12

    Test Method for:Determining Relative Bond Strength Between Hardened Roller Compacted Concrete Lifts (Point Load Test)
  • ASTM C1252

    Test Methods for:Uncompacted Void Content of Fine Aggregate (as Influenced by Particle Shape, Surface Texture, and Grading)
  • ASTM C1260-14

    Test Method for:Potential Alkali Reactivity of Aggregates (Mortar-Bar Method)
  • ASTM C1293-08BR15

    Test Method for:Determination of Length Change of Concrete Due to Alkali-Silica Reaction
  • ASTM C1315-11

    Specification for:Liquid Membrane-Forming Compounds Having Special Properties for Curing and Sealing Concrete
  • ASTM C1339-02R12

    Test Method for:Flowability and Bearing Area of Chemical-Resistant Polymer Machinery Grouts
  • ASTM C1362

    Test Method for:Flow of Freshly Mixed Hydraulic-Cement Concrete
  • ASTM C1383-15

    Test Method for:Measuring the P-Wave Speed and the Thickness of Concrete Plates Using the Impact-Echo Method
  • ASTM C1385_C1385M-10

    Practice for:Sampling Materials for Shotcrete
  • ASTM C1399_C1399M-10R15

    Test Method for:Obtaining Average Residual-Strength of Fiber-Reinforced Concrete
  • ASTM C1435_C1435M-14

    Practice for:Molding Roller-Compacted Concrete in Cylinder Molds Using a Vibrating Hammer
  • ASTM C1436-13

    Specification for:Materials for Shotcrete
  • ASTM C1438-13

    Specification for:Latex and Powder Polymer Modifiers for use in Hydraulic Cement Concrete and Mortar
  • ASTM C1439-13

    Test Methods for:Evaluating Latex and Powder Polymer Modifiers for use in Hydraulic Cement Concrete and Mortar
  • ASTM C1451-11

    Practice for:Determining Variability of Ingredients of Concrete From a Single Source
  • ASTM C1480_C1480M-07R12

    Specification for:Packaged, Pre-Blended, Dry, Combined Materials for Use in Wet or Dry Shotcrete Application
  • ASTM C1524-02AR10

    Test Method for:Water-Extractable Chloride in Aggregate (Soxhlet Method)
  • ASTM C1542_C1542M-14

    Test Method for:Measuring Length of Concrete Cores
  • ASTM C1543-10A

    Test Method for:Determining the Penetration of Chloride Ion into Concrete by Ponding
  • ASTM C1550-12A

    Test Method for:Flexural Toughness of Fiber Reinforced Concrete (Using Centrally Loaded Round Panel)
  • ASTM C1556-11A

    Test Method for:Determining the Apparent Chloride Diffusion Coefficient of Cementitious Mixtures by Bulk Diffusion
  • ASTM C1567-13

    Test Method for:Determining the Potential Alkali-Silica Reactivity of Combinations of Cementitious Materials and Aggregate (Accelerated Mortar-Bar Method)
  • ASTM C1579-13

    Test Method for:Evaluating Plastic Shrinkage Cracking of Restrained Fiber Reinforced Concrete (Using a Steel Form Insert)
  • ASTM C1580-15

    Test Method for:Water-Soluble Sulfate in Soil
  • ASTM C1581_C1581M-09A

    Test Method for:Determining Age at Cracking and Induced Tensile Stress Characteristics of Mortar and Concrete under Restrained Shrinkage
  • ASTM C1582_C1582M-11

    Specification for:Admixtures to Inhibit Chloride-Induced Corrosion of Reinforcing Steel in Concrete
  • ASTM C1583_C1583M-13

    Test Method for:Tensile Strength of Concrete Surfaces and the Bond Strength or Tensile Strength of Concrete Repair and Overlay Materials by Direct Tension (Pull-off Method)
  • ASTM C1585-13

    Test Method for:Measurement of Rate of Absorption of Water by Hydraulic-Cement Concretes
  • ASTM C1602_C1602M-12

    Specification for:Mixing Water Used in the Production of Hydraulic Cement Concrete
  • ASTM C1603-10

    Test Method for:Measurement of Solids in Water
  • ASTM C1604_C1604M-05R12

    Test Method for:Obtaining and Testing Drilled Cores of Shotcrete
  • ASTM C1609_C1609M-12

    Test Method for:Flexural Performance of Fiber-Reinforced Concrete (Using Beam With Third-Point Loading)
  • ASTM C1610_C1610M-14

    Test Method for:Static Segregation of Self-Consolidating Concrete Using Column Technique
  • ASTM C1611_C1611M-14

    Test Method for:Slump Flow of Self-Consolidating Concrete
  • ASTM C1621_C1621M-14

    Test Method for:Passing Ability of Self-Consolidating Concrete by J-Ring
  • ASTM C1622_C1622M-10

    Specification for:Cold-Weather Admixture Systems
  • ASTM C1646_C1646M-08A

    Practice for:Making and Curing Test Specimens for Evaluating Resistance of Coarse Aggregate to Freezing and Thawing in Air-Entrained Concrete
  • ASTM C1679-14

    Practice for:Measuring Hydration Kinetics of Hydraulic Cementitious Mixtures Using Isothermal Calorimetry
  • ASTM C1688_C1688M-14A

    Test Method for:Density and Void Content of Freshly Mixed Pervious Concrete
  • ASTM C1697-10

    Specification for:Blended Supplementary Cementitious Materials
  • ASTM C1698-09R14

    Test Method for:Autogenous Strain of Cement Paste and Mortar
  • ASTM C1701_C1701M-09

    Test Method for:Infiltration Rate of In Place Pervious Concrete
  • ASTM C1708_C1708M-15

    Test Methods for:Self-leveling Mortars Containing Hydraulic Cements
  • ASTM C1709-11

    Guide for:Evaluation of Alternative Supplementary Cementitious Materials (ASCM) for Use in Concrete
  • ASTM C1712-14

    Test Method for:Rapid Assessment of Static Segregation Resistance of Self-Consolidating Concrete Using Penetration Test
  • ASTM C1723-10

    Guide for:Examination of Hardened Concrete Using Scanning Electron Microscopy
  • ASTM C1740-10

    Practice for:Evaluating the Condition of Concrete Plates Using the Impulse-Response Method
  • ASTM C1741-12

    Test Method for:Bleed Stability of Cementitious Post-Tensioning Tendon Grout
  • ASTM C1747_C1747M-13

    Test Method for:Determining Potential Resistance to Degradation of Pervious Concrete by Impact and Abrasion
  • ASTM C1753-15

    Practice for:Evaluating Early Hydration of Hydraulic Cementitious Mixtures Using Thermal Measurements
  • ASTM C1754_C1754M-12

    Test Method for:Density and Void Content of Hardened Pervious Concrete
  • ASTM C1757-13

    Test Method for:Determination of One-Point, Bulk Water Sorption of Dried Concrete
  • ASTM C1758_C1758M-15

    Practice for:Fabricating Test Specimens with Self-Consolidating Concrete
  • ASTM C1760-12

    Test Method for:Bulk Electrical Conductivity of Hardened Concrete
  • ASTM C1761_C1761M-15

    Specification for:Lightweight Aggregate for Internal Curing of Concrete
  • ASTM C1768_C1768M-12

    Practice for:Accelerated Curing of Concrete Cylinders
  • ASTM C1777-15

    Test Method for:Rapid Determination of the Methylene Blue Value for Fine Aggregate or Mineral Filler Using a Colorimeter
  • ASTM C1778-14

    Guide for:Reducing the Risk of Deleterious Alkali-Aggregate Reaction in Concrete
  • ASTM C1792-14

    Test Method for:Measurement of Mass Loss versus Time for One-Dimensional Drying of Saturated Concretes
  • ASTM C1803-15

    Guide for:Abrasion Resistance of Mortar Surfaces Using a Rotary Platform Abraser
  • ASTM C1812-15

    Practice for:Design of Journal Bearing Supports to be Used in Fiber Reinforced Concrete Beam Tests
  • ASTM E0329-14A

    Specification for:Agencies Engaged in Construction Inspection, Testing, or Special Inspection