한국표준정보망(KSSN)

ASTM Annual Book 수록 리스트

핸드북  >  ASTM

    04.03 : 도로 및 포장용 재료:자동차-포장도로시스템

  • ASTM D0005_D0005M-13

    Test Method for:Penetration of Bituminous Materials
  • ASTM D0008-15

    Terminology Relating to:Materials for Roads and Pavements
  • ASTM D0020-03R14

    Test Method for:Distillation of Road Tars
  • ASTM D0070-09E01

    Test Method for:Density of Semi-Solid Bituminous Materials (Pycnometer Method)
  • ASTM D0075_D0075M-14

    Practice for:Sampling Aggregates
  • ASTM D0098-15

    Specification for:Calcium Chloride
  • ASTM D0113

    Test Method for:Ductility of Bituminous Materials
  • ASTM D0139-12

    Test Method for:Float Test for Bituminous Materials
  • ASTM D0140_D0140M-15

    Practice for:Sampling Bituminous Materials
  • ASTM D0242_D0242M-09R14

    Specification for:Mineral Filler For Bituminous Paving Mixtures
  • ASTM D0243_D0243M-14

    Test Method for:Residue of Specified Penetration
  • ASTM D0244-09

    Test Methods and Practices for:Emulsified Asphalts
  • ASTM D0345-02R10

    Test Method for:Sampling and Testing Calcium Chloride for Roads and Structural Applications
  • ASTM D0402_D0402M-14

    Test Method for:Distillation of Cutback Asphalt
  • ASTM D0448-12

    Classification for:Sizes of Aggregate for Road and Bridge Construction
  • ASTM D0490-92R11

    Specification for:Road Tar
  • ASTM D0517-98R15

    Specification for:Asphalt Plank
  • ASTM D0545-14

    Test Methods for:Preformed Expansion Joint Fillers for Concrete Construction (Nonextruding and Resilient Types)
  • ASTM D0546-10

    Test Method for:Sieve Analysis of Mineral Filler for Bituminous Paving Mixtures
  • ASTM D0632-12

    Specification for:Sodium Chloride
  • ASTM D0633-11

    Volume Correction Table for:Road Tar
  • ASTM D0692_D0692M-15

    Specification for:Coarse Aggregate for Bituminous Paving Mixtures
  • ASTM D0946_D0946M-15

    Specification for:Penetration-Graded Asphalt Binder for Use in Pavement Construction
  • ASTM D0977-13E01

    Specification for:Emulsified Asphalt
  • ASTM D0979_D0979M-15

    Practice for:Sampling Bituminous Paving Mixtures
  • ASTM D0994_D0994M-11

    Specification for:Preformed Expansion Joint Filler for Concrete (Bituminous Type)
  • ASTM D1073-11

    Specification for:Fine Aggregate for Bituminous Paving Mixtures
  • ASTM D1074-09

    Test Method for:Compressive Strength of Bituminous Mixtures
  • ASTM D1075-11

    Test Method for:Effect of Water on Compressive Strength of Compacted Bituminous Mixtures
  • ASTM D1139_D1139M-15

    Specification for:Aggregate for Single or Multiple Bituminous Surface Treatments
  • ASTM D1188-07R15

    Test Method for:Bulk Specific Gravity and Density of Compacted Bituminous Mixtures Using Coated Samples
  • ASTM D1195_D1195M-09R15

    Test Method for:Repetitive Static Plate Load Tests of Soils and Flexible Pavement Components, for Use in Evaluation and Design of Airport and Highway Pavements
  • ASTM D1196_D1196M-12

    Test Method for:Nonrepetitive Static Plate Load Tests of Soils and Flexible Pavement Components, for Use in Evaluation and Design of Airport and Highway Pavements
  • ASTM D1369-84R12

    Practice for:Quantities of Materials for Bituminous Surface Treatments
  • ASTM D1461-11

    Test Method for:Moisture or Volatile Distillates in Bituminous Paving Mixtures
  • ASTM D1560-15

    Test Methods for:Resistance to Deformation and Cohesion of Asphalt Mixtures by Means of Hveem Apparatus
  • ASTM D1561_D1561M-13

    Practice for:Preparation of Bituminous Mixture Test Specimens by Means of California Kneading Compactor
  • ASTM D1665-98R14

    Test Method for:Engler Specific Viscosity of Tar Products
  • ASTM D1751-04R13E01

    Specification for:Preformed Expansion Joint Filler for Concrete Paving and Structural Construction (Nonextruding and Resilient Bituminous Types)
  • ASTM D1752-04AR13

    Specification for:Preformed Sponge Rubber Cork and Recycled PVC Expansion Joint Fillers for Concrete Paving and Structural Construction
  • ASTM D1754_D1754M-09R14

    Test Method for:Effects of Heat and Air on Asphaltic Materials (Thin-Film Oven Test)
  • ASTM D1856-09R15

    Test Method for:Recovery of Asphalt From Solution by Abson Method
  • ASTM D1985-13

    Practice for:Preparing Concrete Blocks for Testing Sealants, for Joints and Cracks
  • ASTM D2026_D2026M-15

    Specification for:Cutback Asphalt (Slow-Curing Type)
  • ASTM D2027_D2027M-13

    Specification for:Cutback Asphalt (Medium-Curing Type)
  • ASTM D2028_D2028M-15

    Specification for:Cutback Asphalt (Rapid-Curing Type)
  • ASTM D2041_D2041M-11

    Test Method for:Theoretical Maximum Specific Gravity and Density of Bituminous Paving Mixtures
  • ASTM D2042-15

    Test Method for:Solubility of Asphalt Materials in Trichloroethylene
  • ASTM D2170_D2170M-10

    Test Method for:Kinematic Viscosity of Asphalts (Bitumens)
  • ASTM D2171_D2171M-10

    Test Method for:Viscosity of Asphalts by Vacuum Capillary Viscometer
  • ASTM D2172_D2172M-11

    Test Methods for:Quantitative Extraction of Bitumen From Bituminous Paving Mixtures
  • ASTM D2397_D2397M-13

    Specification for:Cationic Emulsified Asphalt
  • ASTM D2399-12

    Practice for:Selection of Cutback Asphalts
  • ASTM D2419-14

    Test Method for:Sand Equivalent Value of Soils and Fine Aggregate
  • ASTM D2489_D2489M-08

    Practice for:Estimating Degree of Particle Coating of Bituminous-Aggregate Mixtures
  • ASTM D2493_D2493M-09

    Standard:Viscosity-Temperature Chart for Asphalts
  • ASTM D2628-91R11

    Specification for:Preformed Polychloroprene Elastomeric Joint Seals for Concrete Pavements
  • ASTM D2726_D2726M-14

    Test Method for:Bulk Specific Gravity and Density of Non-Absorptive Compacted Bituminous Mixtures
  • ASTM D2728-98R14

    Practice for:Paving Uses and Application Temperatures for Road Tars
  • ASTM D2835-89R12

    Specification for:Lubricant for Installation of Preformed Compression Seals in Concrete Pavements
  • ASTM D2872-12E01

    Test Method for:Effect of Heat and Air on a Moving Film of Asphalt (Rolling Thin-Film Oven Test)
  • ASTM D2940_D2940M-15

    Specification for:Graded Aggregate Material For Bases or Subbases for Highways or Airports
  • ASTM D2950_D2950M-14

    Test Method for:Density of Bituminous Concrete in Place by Nuclear Methods
  • ASTM D2995-14

    Practice for:Estimating Application Rate and Residual Application Rate of Bituminous Distributors
  • ASTM D3042-09R15

    Test Method for:Insoluble Residue in Carbonate Aggregates
  • ASTM D3141_D3141M-15

    Specification for:Asphalt for Undersealing Portland-Cement Concrete Pavements
  • ASTM D3142_D3142M-11

    Test Method for:Specific Gravity, API Gravity, or Density of Cutback Asphalts by Hydrometer Method
  • ASTM D3143_D3143M-13

    Test Method for:Flash Point of Cutback Asphalt with Tag Open-Cup Apparatus
  • ASTM D3203_D3203M-11

    Test Method for:Percent Air Voids in Compacted Dense and Open Bituminous Paving Mixtures
  • ASTM D3279-12

    Test Method for:n-Heptane Insolubles
  • ASTM D3289-08

    Test Method for:Density of Semi-Solid and Solid Bituminous Materials (Nickel Crucible Method)
  • ASTM D3319-11

    Practice for the:Accelerated Polishing of Aggregates Using the British Wheel
  • ASTM D3381_D3381M-13

    Specification for:Viscosity-Graded Asphalt Cement for Use in Pavement Construction
  • ASTM D3387-11

    Test Method for:Compaction and Shear Properties of Bituminous Mixtures by Means of the U.S. Corps of Engineers Gyratory Testing Machine (GTM)
  • ASTM D3398

    Test Method for:Index of Aggregate Particle Shape and Texture
  • ASTM D3406

    Specification For:Joint Sealant, Hot-Applied, Elastomeric-Type, for Portland Cement Concrete Pavements
  • ASTM D3542-08R13

    Specification for:Preformed Polychloroprene Elastomeric Joint Seals for Bridges
  • ASTM D3549_D3549M-11

    Test Method for:Thickness or Height of Compacted Bituminous Paving Mixture Specimens
  • ASTM D3625_D3625M-12

    Practice for:Effect of Water on Bituminous-Coated Aggregate Using Boiling Water
  • ASTM D3628-15

    Practice for:Selection and Use of Emulsified Asphalts
  • ASTM D3633_D3633M-12

    Test Method for:Electrical Resistivity of Membrane-Pavement Systems
  • ASTM D3665-12

    Practice for:Random Sampling of Construction Materials
  • ASTM D3666-13

    Specification for:Minimum Requirements for Agencies Testing and Inspecting Road and Paving Materials
  • ASTM D3744_D3744M-11A

    Test Method for:Aggregate Durability Index
  • ASTM D3910-15

    Practices for:Design, Testing, and Construction of Slurry Seal
  • ASTM D3963_D3963M-15

    Specification for:Fabrication and Jobsite Handling of Epoxy-Coated Steel Reinforcing Bars
  • ASTM D4013

    Practice for:Preparation of Test Specimens of Bituminous Mixtures by Means of Gyratory Shear Compactor
  • ASTM D4014-03R12

    Specification for:Plain and Steel-Laminated Elastomeric Bearings for Bridges
  • ASTM D4070-15

    Specification for:Adhesive Lubricant for Installation of Preformed Elastomeric Bridge Compression Seals in Concrete Structures
  • ASTM D4071-84R11

    Practice for:Use of Portland Cement Concrete Bridge Deck Water Barrier Membrane Systems
  • ASTM D4124-09

    Test Method for:Separation of Asphalt into Four Fractions
  • ASTM D4125_D4125M-10

    Test Methods for:Asphalt Content of Bituminous Mixtures by the Nuclear Method
  • ASTM D4215-07R13

    Specification for:Cold-Mixed, Cold-Laid Bituminous Paving Mixtures
  • ASTM D4280-15

    Specification for:Extended Life Type, Nonplowable, Raised Retroreflective Pavement Markers
  • ASTM D4311_D4311M-15

    Practice for:Determining Asphalt Volume Correction to a Base Temperature
  • ASTM D4383-12

    Specification for:Plowable, Raised Retroreflective Pavement Markers
  • ASTM D4460-97R15

    Practice for:Calculating Precision Limits Where Values are Calculated from Other Test Methods
  • ASTM D4469-11

    Practice for:Calculating Percent Asphalt Absorption by the Aggregate in an Asphalt Pavement Mixture
  • ASTM D4505-12

    Specification for:Preformed Retroreflective Pavement Marking Tape for Extended Service Life
  • ASTM D4552_D4552M-10

    Practice for:Classifying Hot-Mix Recycling Agents
  • ASTM D4561-11

    Practice for:Quality Control Systems for Organizations Producing and Applying Bituminous Paving Materials
  • ASTM D4580_D4580M-12

    Practice for:Measuring Delaminations in Concrete Bridge Decks by Sounding
  • ASTM D4592-12

    Specification for:Preformed Retroreflective Pavement Marking Tape for Limited Service Life
  • ASTM D4602-93R15

    Guide for:Nondestructive Testing of Pavements Using Cyclic-Loading Dynamic Deflection Equipment
  • ASTM D4694-09R15

    Test Method for:Deflections with a Falling-Weight-Type Impulse Load Device
  • ASTM D4695-03R15

    Guide for:General Pavement Deflection Measurements
  • ASTM D4748-10R15

    Test Method for:Determining the Thickness of Bound Pavement Layers Using Short-Pulse Radar
  • ASTM D4788-03R13

    Test Method for:Detecting Delaminations in Bridge Decks Using Infrared Thermography
  • ASTM D4791-10

    Test Method for:Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate
  • ASTM D4792_D4792M-13

    Test Method for:Potential Expansion of Aggregates from Hydration Reactions
  • ASTM D4867_D4867M-09R14

    Test Method for:Effect of Moisture on Asphalt Concrete Paving Mixtures
  • ASTM D4887_D4887M-11

    Practice for:Preparation of Viscosity Blends for Hot Recycled Asphalt Materials
  • ASTM D4956-13

    Specification for:Retroreflective Sheeting for Traffic Control
  • ASTM D4957-08

    Test Method for:Apparent Viscosity of Asphalt Emulsion Residues and Non-Newtonian Bitumens by Vacuum Capillary Viscometer
  • ASTM D5078_D5078M-11

    Specification for:Crack Filler, Hot-Applied, for Asphalt Concrete and Portland Cement Concrete Pavements
  • ASTM D5106-15

    Specification for:Steel Slag Aggregates for Bituminous Paving Mixtures
  • ASTM D5148-10

    Test Method for:Centrifuge Kerosine Equivalent
  • ASTM D5167-13

    Practice for:Melting of Hot-Applied Joint and Crack Sealant and Filler for Evaluation
  • ASTM D5249-10

    Specification for:Backer Material for Use with Cold- and Hot-Applied Joint Sealants in Portland-Cement Concrete and Asphalt Joints
  • ASTM D5329-09

    Test Methods for:Sealants and Fillers, Hot-Applied, for Joints and Cracks in Asphaltic and Portland Cement Concrete Pavements
  • ASTM D5340-12

    Test Method for:Airport Pavement Condition Index Surveys
  • ASTM D5360-15

    Practice for:Design and Construction of Bituminous Surface Treatments
  • ASTM D5361_D5361M-14

    Practice for:Sampling Compacted Bituminous Mixtures for Laboratory Testing
  • ASTM D5404_D5404M-12

    Practice for:Recovery of Asphalt from Solution Using the Rotary Evaporator
  • ASTM D5444-15

    Test Method for:Mechanical Size Analysis of Extracted Aggregate
  • ASTM D5505-14

    Practice for:Classifying Emulsified Recycling Agents
  • ASTM D5506

    Practice for:Organizations Engaged in the Certification of Personnel Testing and Inspecting Bituminous Paving Materials
  • ASTM D5546-09

    Test Method for:Solubility of Asphalt Binders in Toluene by Centrifuge
  • ASTM D5581-07AR13

    Test Method for:Resistance to Plastic Flow of Bituminous Mixtures Using Marshall Apparatus (6 inch-Diameter Specimen)
  • ASTM D5624-13

    Practice for:Determining the Transverse-Aggregate Spread Rate for Surface Treatment Applications
  • ASTM D5710_D5710M-15

    Specification for:Trinidad Lake Modified Asphalt
  • ASTM D5801-12

    Test Method for:Toughness and Tenacity of Bituminous Materials
  • ASTM D5821-13

    Test Method for:Determining the Percentage of Fractured Particles in Coarse Aggregate
  • ASTM D5858-96R15

    Guide for:Calculating In Situ Equivalent Elastic Moduli of Pavement Materials Using Layered Elastic Theory
  • ASTM D5893_D5893M-10

    Specification for:Cold Applied, Single Component, Chemically Curing Silicone Joint Sealant for Portland Cement Concrete Pavements
  • ASTM D5973-97R12

    Specification for:Elastomeric Strip Seals with Steel Locking Edge Rails Used in Expansion Joint Sealing
  • ASTM D5977-15

    Specification for:High Load Rotational Spherical Bearings for Bridges and Structures
  • ASTM D6084_D6084M-13

    Test Method for:Elastic Recovery of Asphalt Materials by Ductilometer
  • ASTM D6087-08R15E01

    Test Method for:Evaluating Asphalt-Covered Concrete Bridge Decks Using Ground Penetrating Radar
  • ASTM D6114_D6114M-09

    Specification for:Asphalt-Rubber Binder
  • ASTM D6153-15

    Specification for:Materials for Bridge Deck Waterproofing Membrane Systems
  • ASTM D6154-15

    Specification for:Chemically Modified Asphalt Cement for Use in Pavement Construction
  • ASTM D6155-15

    Specification for:Nontraditional Coarse Aggregates for Bituminous Paving Mixtures
  • ASTM D6297-13

    Specification for:Asphaltic Plug Joints for Bridges
  • ASTM D6307-10

    Test Method for:Asphalt Content of Hot-Mix Asphalt by Ignition Method
  • ASTM D6372-15

    Practice for:Design, Testing, and Construction of Microsurfacing
  • ASTM D6373-15

    Specification for:Performance Graded Asphalt Binder
  • ASTM D6390-11

    Test Method for:Determination of Draindown Characteristics in Uncompacted Asphalt Mixtures
  • ASTM D6433-11

    Practice for:Roads and Parking Lots Pavement Condition Index Surveys
  • ASTM D6521-13

    Practice for:Accelerated Aging of Asphalt Binder Using a Pressurized Aging Vessel (PAV)
  • ASTM D6607-00R15

    Practice for:Inclusion of Precision Statement Variation in Specification Limits
  • ASTM D6608-12

    Practice for:the Identification of Trinidad Lake Asphalt in Asphalt Mixes
  • ASTM D6626-15

    Specification for:Performance Graded Trinidad Lake Modified Asphalt Binder
  • ASTM D6627_D6627M-11

    Test Method for:Determination of a Volatile Distillate Fraction of Cold Asphalt Mixtures
  • ASTM D6628-03R15

    Specification for:Color of Pavement Marking Materials
  • ASTM D6648-08

    Test Method for:Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)
  • ASTM D6690-15

    Specification for:Joint and Crack Sealants, Hot Applied, for Concrete and Asphalt Pavements
  • ASTM D6703-14

    Test Method for:Automated Heithaus Titrimetry
  • ASTM D6704-08R15

    Test Method for:Determining the Workability of Asphalt Cold Mix Patching Material
  • ASTM D6723-12

    Test Method for:Determining the Fracture Properties of Asphalt Binder in Direct Tension (DT)
  • ASTM D6752_D6752M-11

    Test Method for:Bulk Specific Gravity and Density of Compacted Bituminous Mixtures Using Automatic Vacuum Sealing Method
  • ASTM D6816-11

    Practice for:Determining Low-Temperature Performance Grade (PG) of Asphalt Binders
  • ASTM D6857_D6857M-11

    Test Method for:Maximum Specific Gravity and Density of Bituminous Paving Mixtures Using Automatic Vacuum Sealing Method
  • ASTM D6924-03R12

    Specification for:Preformed Thermoplastic Vulcanizate Elastomeric Joint Seals for Bridges
  • ASTM D6925-15

    Test Method for:Preparation and Determination of the Relative Density of Asphalt Mix Specimens by Means of the Superpave Gyratory Compactor
  • ASTM D6926-10

    Practice for:Preparation of Bituminous Specimens Using Marshall Apparatus
  • ASTM D6927-15

    Test Method for:Marshall Stability and Flow of Asphalt Mixtures
  • ASTM D6928-10

    Test Method for:Resistance of Coarse Aggregate to Degradation by Abrasion in the Micro-Deval Apparatus
  • ASTM D6929-10

    Practice for:Freezing of Emulsified Asphalts
  • ASTM D6930-10

    Test Method for:Settlement and Storage Stability of Emulsified Asphalts
  • ASTM D6931-12

    Test Method for:Indirect Tensile (IDT) Strength of Bituminous Mixtures
  • ASTM D6932_D6932M-08R13

    Guide for:Materials and Construction of Open-Graded Friction Course Plant Mixtures
  • ASTM D6933-13

    Test Method for:Oversized Particles in Emulsified Asphalts (Sieve Test)
  • ASTM D6934-08

    Test Method for:Residue by Evaporation of Emulsified Asphalt
  • ASTM D6935-11

    Test Method for:Determining Cement Mixing of Emulsified Asphalt
  • ASTM D6936-09

    Test Method for:Determining Demulsibility of Emulsified Asphalt
  • ASTM D6937-08

    Test Method for:Determining Density of Emulsified Asphalt
  • ASTM D6951_D6951M-09R15

    Test Method for:Use of the Dynamic Cone Penetrometer in Shallow Pavement Applications
  • ASTM D6995-05R13

    Test Method for:Determining Field VMA based on the Maximum Specific Gravity of the Mix (Gmm)
  • ASTM D6997-12

    Test Method for:Distillation of Emulsified Asphalt
  • ASTM D6998-11

    Practice for:Evaluating Aggregate Coating using Emulsified Asphalts
  • ASTM D6999-12

    Practice for:Miscibility of Emulsified Asphalts
  • ASTM D7000-11

    Test Method for:Sweep Test of Bituminous Emulsion Surface Treatment Samples
  • ASTM D7063_D7063M-11

    Test Method for:Effective Porosity and Effective Air Voids of Compacted Bituminous Paving Mixture Samples
  • ASTM D7064_D7064M-08R13

    Practice for:Open-Graded Friction Course (OGFC) Mix Design
  • ASTM D7113_D7113M-10

    Test Method for:Density of Bituminous Paving Mixtures in Place by the Electromagnetic Surface Contact Methods
  • ASTM D7115-10R15

    Test Method for:Measurement of Superpave Gyratory Compactor (SGC) Internal Angle of Gyration Using Simulated Loading
  • ASTM D7116

    Specification for:Joint Sealants, Hot Applied, Jet Fuel Resistant Types, for Portland Cement Concrete Pavements
  • ASTM D7172-14

    Test Method for:Determining the Relative Density (Specific Gravity) and Absorption of Fine Aggregates Using Infrared
  • ASTM D7173-14

    Practice for:Determining the Separation Tendency of Polymer from Polymer Modified Asphalt
  • ASTM D7174-05R11

    Specification for:Preformed Closed-Cell Polyolefin Expansion Joint Fillers for Concrete Paving and Structural Construction
  • ASTM D7175-15

    Test Method for:Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer
  • ASTM D7196-12

    Test Method for:Raveling Test of Cold Mixed Emulsified Asphalt Samples
  • ASTM D7226-13

    Test Method for:Determining the Viscosity of Emulsified Asphalts Using a Rotational Paddle Viscometer
  • ASTM D7227_D7227M-11E01

    Practice for:Rapid Drying of Compacted Asphalt Specimens Using Vacuum Drying Apparatus
  • ASTM D7228-06AR15

    Test Method for:Prediction of Asphalt-Bound Pavement Layer Temperatures
  • ASTM D7229-08R13E01

    Test Method for:Preparation and Determination of Bulk Specific Gravity of Dense-Graded Cold Mix Asphalt (CMA) Specimens by Means of Superpave Gyratory Compactor
  • ASTM D7312-10

    Test Method for:Determining the Permanent Shear Strain and Complex Shear Modulus of Asphalt Mixtures Using the Superpave Shear Tester (SST)
  • ASTM D7313-13

    Test Method for:Determining Fracture Energy of Asphalt-Aggregate Mixtures Using the Disk-Shaped Compact Tension Geometry
  • ASTM D7369-11

    Test Method for:Determining the Resilient Modulus of Bituminous Mixtures by Indirect Tension Test
  • ASTM D7370_D7370M-14

    Test Method for:Determination of Relative Density and Absorption of Fine, Coarse and Blended Aggregate Using Combined Vacuum Saturation and Rapid Submersion
  • ASTM D7402-09

    Practice for:Identifying Cationic Emulsified Asphalts
  • ASTM D7403-09

    Test Method for:Determination of Residue of Emulsified Asphalt by Low Temperature Vacuum Distillation
  • ASTM D7404-07R12

    Test Method for:Determination of Emulsified Asphalt Residue by Moisture Analyzer
  • ASTM D7405-15

    Test Method for:Multiple Stress Creep and Recovery (MSCR) of Asphalt Binder Using a Dynamic Shear Rheometer
  • ASTM D7428-15

    Test Method for:Resistance of Fine Aggregate to Degradation by Abrasion in the Micro-Deval Apparatus
  • ASTM D7460-10

    Test Method for:Determining Fatigue Failure of Compacted Asphalt Concrete Subjected to Repeated Flexural Bending
  • ASTM D7495-12

    Specification for:Minimum Requirements for Accreditation Bodies that Accredit Agencies Testing and Inspecting Road and Paving Materials
  • ASTM D7496-11

    Test Method for:Viscosity of Emulsified Asphalt by Saybolt Furol Viscometer
  • ASTM D7497-09

    Practice for:Recovering Residue from Emulsified Asphalt Using Low Temperature Evaporative Technique
  • ASTM D7552-09R14

    Test Method for:Determining the Complex Shear Modulus (G*) Of Bituminous Mixtures Using Dynamic Shear Rheometer
  • ASTM D7553-15

    Test Method for:Solubility of Asphalt Materials in N-Propyl Bromide
  • ASTM D7564_D7564M-09R15

    Practice for:Construction of Asphalt-Rubber Cape Seal
  • ASTM D7585_D7585M-10R15

    Practice for:Evaluating Retroreflective Pavement Markings Using Portable Hand-Operated Instruments
  • ASTM D7643-10

    Practice for:Determining the Continuous Grading Temperatures and Continuous Grades for PG Graded Asphalt Binders
  • ASTM D7741_D7741M-11E01

    Test Method for:Measurement of Apparent Viscosity of Asphalt-Rubber or Other Asphalt Binders by Using a Rotational Hand Held Viscometer
  • ASTM D7870_D7870M-13

    Practice for:Moisture Conditioning Compacted Asphalt Mixture Specimens by Using Hydrostatic Pore Pressure
  • ASTM D7906-14

    Practice for:Recovery of Asphalt from Solution Using Toluene and the Rotary Evaporator
  • ASTM D7942-15

    Specification for:Thermoplastic Pavement Markings in Non Snow Plow Areas
  • ASTM D7944-15

    Practice for:Recovery of Emulsified Asphalt Residue Using a Vacuum Oven
  • ASTM D7981-15

    Practice for:Compaction of Prismatic Asphalt Specimens by Means of the Shear Box Compactor
  • ASTM E0274_E0274M-15

    Test Method for:Skid Resistance of Paved Surfaces Using a Full-Scale Tire
  • ASTM E0303-93R13

    Test Method for:Measuring Surface Frictional Properties Using the British Pendulum Tester
  • ASTM E0445_E0445M-15

    Test Method for:Stopping Distance on Paved Surfaces Using a Passenger Vehicle Equipped With Full-Scale Tires
  • ASTM E0501-08R15

    Specification for:Standard Rib Tire for Pavement Skid-Resistance Tests
  • ASTM E0524-08R15

    Specification for:Standard Smooth Tire for Pavement Skid-Resistance Tests
  • ASTM E0556_E0556M-11R15

    Test Method for:Calibrating a Wheel Force or Torque Transducer Using a Calibration Platform (User Level)
  • ASTM E0660-90R15

    Practice for:Accelerated Polishing of Aggregates or Pavement Surfaces Using a Small-Wheel, Circular Track Polishing Machine
  • ASTM E0670-09R15

    Test Method for:Testing Side Force Friction on Paved Surfaces Using the Mu-Meter
  • ASTM E0867-06R12

    Terminology Relating to:Vehicle-Pavement Systems
  • ASTM E0950_E0950M-09

    Test Method for:Measuring the Longitudinal Profile of Traveled Surfaces with an Accelerometer Established Inertial Profiling Reference
  • ASTM E0965-15

    Test Method for:Measuring Pavement Macrotexture Depth Using a Volumetric Technique
  • ASTM E1082-90R12

    Test Method for:Measurement of Vehicular Response to Traveled Surface Roughness
  • ASTM E1166-00R15

    Guide for:Network Level Pavement Management
  • ASTM E1170-97R12

    Practices for:Simulating Vehicular Response to Longitudinal Profiles of Traveled Surfaces
  • ASTM E1215-93R12

    Specification for:Trailers Used for Measuring Vehicular Response to Road Roughness
  • ASTM E1274-03R12

    Test Method for:Measuring Pavement Roughness Using a Profilograph
  • ASTM E1318-09

    Specification for:Highway Weigh-In-Motion (WIM) Systems with User Requirements and Test Methods
  • ASTM E1337-90R12

    Test Method for:Determining Longitudinal Peak Braking Coefficient of Paved Surfaces Using Standard Reference Test Tire
  • ASTM E1364-95R12

    Test Method for:Measuring Road Roughness by Static Level Method
  • ASTM E1448_E1448M-09R15

    Practice for:Calibration of Systems Used for Measuring Vehicular Response to Pavement Roughness
  • ASTM E1489-08R13

    Practice for:Computing Ride Number of Roads from Longitudinal Profile Measurements Made by an Inertial Profile Measuring Device
  • ASTM E1551-08R15

    Specification for:Special Purpose, Smooth–Tread Tire, Operated on Fixed Braking Slip Continuous Friction Measuring Equipment
  • ASTM E1656_E1656M-11

    Guide for:Classification of Automated Pavement Condition Survey Equipment
  • ASTM E1703_E1703M-10R15

    Test Method for:Measuring Rut-Depth of Pavement Surfaces Using a Straightedge
  • ASTM E1777-09R15

    Guide for:Prioritization of Data Needs for Pavement Management
  • ASTM E1778-98AR15

    Terminology Relating to:Pavement Distress
  • ASTM E1844-08R15

    Specification for:A Size 10 × 4–5 Smooth-Tread Friction Test Tire
  • ASTM E1845-15

    Practice for:Calculating Pavement Macrotexture Mean Profile Depth
  • ASTM E1859_E1859M-11R15

    Test Method for:Friction Coefficient Measurements Between Tire and Pavement Using a Variable Slip Technique
  • ASTM E1889-97R15

    Guide for:Pavement Management Implementation
  • ASTM E1890-11R15

    Guide for:Validating New Area Reference Skid Measurement Systems and Equipment
  • ASTM E1911-09AE01

    Test Method for:Measuring Paved Surface Frictional Properties Using the Dynamic Friction Tester
  • ASTM E1926-08R15

    Practice for:Computing International Roughness Index of Roads from Longitudinal Profile Measurements
  • ASTM E1927-98R12

    Guide for:Conducting Subjective Pavement Ride Quality Ratings
  • ASTM E1957-04R10

    Practice for:Installing and Using Pneumatic Tubes with Roadway Traffic Counters and Classifiers
  • ASTM E1960-07R15

    Practice for:Calculating International Friction Index of a Pavement Surface
  • ASTM E2034-99R12

    Practices for:Simulating Truck Response to Longitudinal Profiles of Vehicular Traveled Surfaces
  • ASTM E2100-04R15

    Practice for:Calculating the International Runway Friction Index
  • ASTM E2101-15

    Test Method for:Measuring the Frictional Properties of Winter Contaminated Pavement Surfaces Using an Averaging-Type Spot Measuring Decelerometer
  • ASTM E2133-03R13

    Test Method for:Using a Rolling Inclinometer to Measure Longitudinal and Transverse Profiles of a Traveled Surface
  • ASTM E2157-15

    Test Method for:Measuring Pavement Macrotexture Properties Using the Circular Track Meter
  • ASTM E2213-03R10

    Specification for:Telecommunications and Information Exchange Between Roadside and Vehicle Systems — 5 GHz Band Dedicated Short Range Communications (DSRC) Medium Access Control (MAC) and Physical Layer (PHY) Specifications
  • ASTM E2259-03AR11

    Guide for:Archiving and Retrieving Intelligent Transportation Systems-Generated Data
  • ASTM E2300-09

    Specification for:Highway Traffic Monitoring Devices
  • ASTM E2340_E2340M-11R15

    Test Method for:Measuring the Skid Resistance of Pavements and Other Trafficked Surfaces Using a Continuous Reading, Fixed-Slip Technique
  • ASTM E2341_E2341M-05R14

    Test Method for:Determining the Stopping Distance Number by Initial Speed and Stopping Distance at Traffic Incident Sites
  • ASTM E2380_E2380M-15

    Test Method for:Measuring Pavement Texture Drainage Using an Outflow Meter
  • ASTM E2415-05R12

    Practice for:Installing Piezoelectric Highway Traffic Sensors
  • ASTM E2467-05R12

    Practice for:Developing Axle Count Adjustment Factors
  • ASTM E2468-05R12

    Practice for:Metadata to Support Archived Data Management Systems
  • ASTM E2532-09

    Test Methods for:Evaluating Performance of Highway Traffic Monitoring Devices
  • ASTM E2560-13

    Specification for:Data Format for Pavement Profile
  • ASTM E2561-07AR12

    Practice for the:Installation of Inductive Loop Detectors
  • ASTM E2583-07R15

    Test Method for:Measuring Deflections with a Light Weight Deflectometer (LWD)
  • ASTM E2665-08

    Specification for:Archiving ITS-Generated Traffic Monitoring Data
  • ASTM E2666-09R14

    Practice for:Correlations of Mu Values of Continuous Friction Measurement Equipment to Determine Maintenance Levels for Use at Airports
  • ASTM E2667-09

    Practice for:Acquiring Intersection Turning Movement Traffic Data
  • ASTM E2759-10

    Practice for:Highway Traffic Monitoring Truth-in-Data
  • ASTM E2793-10E01

    Guide for the:Evaluation, Calibration, and Correlation of E274 Friction Measurement Systems and Equipment
  • ASTM E2835-11R15

    Test Method for:Measuring Deflections using a Portable Impulse Plate Load Test Device
  • ASTM E2840-11R15

    Practice for:Pavement Condition Index Surveys for Interlocking Concrete Roads and Parking Lots
  • ASTM E2883-13

    Guide for:Standard Guide for the Evaluation, and Calibration, Continuous Friction Measurement Equipment (CFME)
  • ASTM E2955-13

    Practice for:Simulating Profilograph Response to Longitudinal Profiles of Traveled Surfaces
  • ASTM E3013_E3013M-15

    Test Method for:Evaluating Concrete Pavement Dowel Bar Alignment Using Magnetic Pulse Induction