한국표준정보망(KSSN)

ASTM Annual Book 수록 리스트

핸드북  >  ASTM

    04.05 : 내화성 비금속 재료, 투화점토관, 콘크리트관

  • ASTM C0004-04R14

    Specification for:Clay Drain Tile and Perforated Clay Drain Tile
  • ASTM C0012-14

    Practice for:Installing Vitrified Clay Pipe Lines
  • ASTM C0014-15A

    Specification for:Nonreinforced Concrete Sewer, Storm Drain, and Culvert Pipe
  • ASTM C0014M-15A

    Specification for:Nonreinforced Concrete Sewer, Storm Drain, and Culvert Pipe (Metric)
  • ASTM C0032-13

    Specification for:Sewer and Manhole Brick (Made From Clay or Shale)
  • ASTM C0034-13

    Specification for:Structural Clay Load-Bearing Wall Tile
  • ASTM C0055-14A

    Specification for:Concrete Building Brick
  • ASTM C0056-13

    Specification for:Structural Clay Nonloadbearing Tile
  • ASTM C0062-13A

    Specification for:Building Brick (Solid Masonry Units Made From Clay or Shale)
  • ASTM C0067-14

    Test Methods for:Sampling and Testing Brick and Structural Clay Tile
  • ASTM C0073-14

    Specification for:Calcium Silicate Brick (Sand-Lime Brick)
  • ASTM C0076-15A

    Specification for:Reinforced Concrete Culvert, Storm Drain, and Sewer Pipe
  • ASTM C0076M-15

    Specification for:Reinforced Concrete Culvert, Storm Drain, and Sewer Pipe (Metric)
  • ASTM C0090-15

    Specification for:Loadbearing Concrete Masonry Units
  • ASTM C0118-15

    Specification for:Concrete Pipe for Irrigation or Drainage
  • ASTM C0118M-15

    Specification for:Concrete Pipe for Irrigation or Drainage (Metric)
  • ASTM C0126-15

    Specification for:Ceramic Glazed Structural Clay Facing Tile, Facing Brick, and Solid Masonry Units
  • ASTM C0129-14A

    Specification for:Nonloadbearing Concrete Masonry Units
  • ASTM C0139-14

    Specification for:Concrete Masonry Units for Construction of Catch Basins and Manholes
  • ASTM C0140_C0140M-15A

    Test Methods for:Sampling and Testing Concrete Masonry Units and Related Units
  • ASTM C0144-11

    Specification for:Aggregate for Masonry Mortar
  • ASTM C0159-06R11

    Specification for:Vitrified Clay Filter Blocks
  • ASTM C0212-14

    Specification for:Structural Clay Facing Tile
  • ASTM C0216-15

    Specification for:Facing Brick (Solid Masonry Units Made from Clay or Shale)
  • ASTM C0220-91R15

    Specification for:Flat Asbestos-Cement Sheets
  • ASTM C0221-98R14

    Specification for:Corrugated Asbestos-Cement Sheets
  • ASTM C0222-97R14

    Specification for:Asbestos-Cement Roofing Shingles
  • ASTM C0223-98R14

    Specification for:Asbestos-Cement Siding
  • ASTM C0270-14A

    Specification for:Mortar for Unit Masonry
  • ASTM C0279-13A

    Specification for:Chemical-Resistant Masonry Units
  • ASTM C0287-98R12

    Specification for:Chemical-Resistant Sulfur Mortar
  • ASTM C0296_C0296M-00R15

    Specification for:Asbestos-Cement Pressure Pipe
  • ASTM C0301-13

    Test Methods for:Vitrified Clay Pipe
  • ASTM C0315-07R11

    Specification for:Clay Flue Liners and Chimney Pots
  • ASTM C0321-00R12

    Test Method for:Bond Strength of Chemical-Resistant Mortars
  • ASTM C0361-14A

    Specification for:Reinforced Concrete Low-Head Pressure Pipe
  • ASTM C0361M-14

    Specification for:Reinforced Concrete Low-Head Pressure Pipe (Metric)
  • ASTM C0386-93R12

    Practice for:Use of Chemical-Resistant Sulfur Mortar
  • ASTM C0395-01R12

    Specification for:Chemical-Resistant Resin Mortars
  • ASTM C0397-00R12

    Practice for:Use of Chemically Setting Chemical-Resistant Silicate and Silica Mortars
  • ASTM C0398-98R12

    Practice for Use of:Hydraulic Cement Mortars in Chemical-Resistant Masonry
  • ASTM C0399-98R12

    Practice for:Use of Chemical-Resistant Resin Mortars
  • ASTM C0404-11

    Specification for:Aggregates for Masonry Grout
  • ASTM C0410-13

    Specification for:Industrial Floor Brick
  • ASTM C0412-15

    Specification for:Concrete Drain Tile
  • ASTM C0412M-15

    Specification for:Concrete Drain Tile (Metric)
  • ASTM C0414-03R12

    Test Method for:Working, Setting, and Service Strength Setting Times of Chemically Setting Chemical-Resistant Silicate and Silica Mortars
  • ASTM C0425-04R13

    Specification for:Compression Joints for Vitrified Clay Pipe and Fittings
  • ASTM C0426-15

    Test Method for:Linear Drying Shrinkage of Concrete Masonry Units
  • ASTM C0428_C0428M-05R11E01

    Specification for:Asbestos-Cement Nonpressure Sewer Pipe
  • ASTM C0443-12

    Specification for:Joints for Concrete Pipe and Manholes, Using Rubber Gaskets
  • ASTM C0443M-11

    Specification for:Joints for Concrete Pipe and Manholes, Using Rubber Gaskets (Metric)
  • ASTM C0444-03R09

    Specification for:Perforated Concrete Pipe
  • ASTM C0444M-03R09

    Specification for:Perforated Concrete Pipe (Metric)
  • ASTM C0458_C0458M-98R11E01

    Test Method for:Organic Fiber Content of Asbestos-Cement Products
  • ASTM C0459_C0459M-97R11E01

    Test Methods for:Asbestos-Cement Flat Products
  • ASTM C0466-03R12

    Specification for:Chemically Setting Silicate and Silica Chemical-Resistant Mortars
  • ASTM C0476-10

    Specification for:Grout for Masonry
  • ASTM C0478-15A

    Specification for:Circular Precast Reinforced Concrete Manhole Sections
  • ASTM C0478M-15A

    Specification for:Circular Precast Reinforced Concrete Manhole Sections (Metric)
  • ASTM C0479-04R13

    Specification for:Vitrified Clay Liner Plates
  • ASTM C0497-15

    Test Methods for:Concrete Pipe, Manhole Sections, or Tile
  • ASTM C0497M-15

    Test Methods for:Concrete Pipe, Manhole Sections, or Tile (Metric)
  • ASTM C0500_C0500M-07R11E01

    Test Methods for:Asbestos-Cement Pipe
  • ASTM C0505-15

    Specification for:Nonreinforced Concrete Irrigation Pipe with Rubber Gasket Joints
  • ASTM C0505M-15

    Specification for:Nonreinforced Concrete Irrigation Pipe With Rubber Gasket Joints (Metric)
  • ASTM C0506-15

    Specification for:Reinforced Concrete Arch Culvert, Storm Drain, and Sewer Pipe
  • ASTM C0506M-14

    Specification for:Reinforced Concrete Arch Culvert, Storm Drain, and Sewer Pipe (Metric)
  • ASTM C0507-15

    Specification for:Reinforced Concrete Elliptical Culvert, Storm Drain, and Sewer Pipe
  • ASTM C0507M-15

    Specification for:Reinforced Concrete Elliptical Culvert, Storm Drain, and Sewer Pipe (Metric)
  • ASTM C0508_C0508M-00R15

    Specification for:Asbestos-Cement Underdrain Pipe
  • ASTM C0530-13

    Specification for:Structural Clay Nonloadbearing Screen Tile
  • ASTM C0541_C0541M-98R11E01

    Specification for:Linings for Asbestos-Cement Pipe
  • ASTM C0551_C0551M-07R11E01

    Specification for:Asbestos-Cement Fiberboard Insulating Panels
  • ASTM C0652-15

    Specification for:Hollow Brick (Hollow Masonry Units Made From Clay or Shale)
  • ASTM C0654-15

    Specification for:Porous Concrete Pipe
  • ASTM C0654M-15

    Specification for:Porous Concrete Pipe (Metric)
  • ASTM C0655-15

    Specification for:Reinforced Concrete D-Load Culvert, Storm Drain, and Sewer Pipe
  • ASTM C0655M-15

    Specification for:Reinforced Concrete D-Load Culvert, Storm Drain, and Sewer Pipe (Metric)
  • ASTM C0658-98R12

    Specification for:Chemical-Resistant Resin Grouts for Brick or Tile
  • ASTM C0659-90R14

    Specification for:Asbestos-Cement Organic-Foam Core Insulating Panels
  • ASTM C0663-98R14

    Specification for:Asbestos-Cement Storm Drain Pipe
  • ASTM C0668-98R14

    Specification for:Asbestos-Cement Transmission Pipe
  • ASTM C0700-13

    Specification for:Vitrified Clay Pipe, Extra Strength, Standard Strength, and Perforated
  • ASTM C0723-98R12

    Practice for:Chemical-Resistant Resin Grouts for Brick or Tile
  • ASTM C0725-90R14

    Specification for:Semidense Mineral Fiber Siding
  • ASTM C0744-14

    Specification for:Prefaced Concrete and Calcium Silicate Masonry Units
  • ASTM C0746-90R14

    Specification for:Corrugated Asbestos-Cement Sheets for Bulkheading
  • ASTM C0780-15A

    Test Method for:Preconstruction and Construction Evaluation of Mortars for Plain and Reinforced Unit Masonry
  • ASTM C0822-13

    Terminology Relating to:Concrete Pipe and Related Products
  • ASTM C0825-06R11

    Specification for:Precast Concrete Barriers
  • ASTM C0828-11

    Test Method for:Low-Pressure Air Test of Vitrified Clay Pipe Lines
  • ASTM C0857-14

    Practice for:Minimum Structural Design Loading for Underground Precast Concrete Utility Structures
  • ASTM C0858-10E01

    Specification for:Underground Precast Concrete Utility Structures
  • ASTM C0875-98R14

    Specification for:Asbestos-Cement Conduit
  • ASTM C0877-08

    Specification for:External Sealing Bands for Concrete Pipe, Manholes, and Precast Box Sections
  • ASTM C0877M-02R09

    Specification for:External Sealing Bands for Concrete Pipe, Manholes, and Precast Box Sections (Metric)
  • ASTM C0887-13

    Specification for:Packaged, Dry, Combined Materials for Surface Bonding Mortar
  • ASTM C0890-13

    Practice for:Minimum Structural Design Loading for Monolithic or Sectional Precast Concrete Water and Wastewater Structures
  • ASTM C0891-11

    Practice for:Installation of Underground Precast Concrete Utility Structures
  • ASTM C0896-15

    Terminology Relating to:Clay Products
  • ASTM C0901-10

    Specification for:Prefabricated Masonry Panels
  • ASTM C0902-15

    Specification for:Pedestrian and Light Traffic Paving Brick
  • ASTM C0904-01R12

    Terminology Relating to:Chemical-Resistant Nonmetallic Materials
  • ASTM C0905-01R12

    Test Methods for:Apparent Density of Chemical-Resistant Mortars, Grouts, Monolithic Surfacings, and Polymer Concretes
  • ASTM C0913-08

    Specification for:Precast Concrete Water and Wastewater Structures
  • ASTM C0915-79R10

    Specification for:Precast Reinforced Concrete Crib Wall Members
  • ASTM C0923-08R13E01

    Specification for:Resilient Connectors Between Reinforced Concrete Manhole Structures, Pipes, and Laterals
  • ASTM C0923M-08BR13

    Specification for:Resilient Connectors Between Reinforced Concrete Manhole Structures, Pipes, and Laterals (Metric)
  • ASTM C0924

    Practice for:Testing Concrete Pipe Sewer Lines by Low-Pressure Air Test Method
  • ASTM C0924M

    Practice for:Testing Concrete Pipe Sewer Lines by Low-Pressure Air Test Method (Metric)
  • ASTM C0935-13

    Specification for:General Requirements for Prestressed Concrete Poles Statically Cast
  • ASTM C0936_C0936M-15

    Specification for:Solid Concrete Interlocking Paving Units
  • ASTM C0946-10

    Practice for:Construction of Dry-Stacked, Surface-Bonded Walls
  • ASTM C0947-03R09

    Test Method for:Flexural Properties of Thin-Section Glass-Fiber-Reinforced Concrete (Using Simple Beam With Third-Point Loading)
  • ASTM C0948-81R09

    Test Method for:Dry and Wet Bulk Density, Water Absorption, and Apparent Porosity of Thin Sections of Glass-Fiber Reinforced Concrete
  • ASTM C0952-12

    Test Method for:Bond Strength of Mortar to Masonry Units
  • ASTM C0966-98R14

    Guide for:Installing Asbestos-Cement Nonpressure Pipe
  • ASTM C0969-02R09

    Practice for:Infiltration and Exfiltration Acceptance Testing of Installed Precast Concrete Pipe Sewer Lines
  • ASTM C0969M-02R09

    Practice for:Infiltration and Exfiltration Acceptance Testing of Installed Precast Concrete Pipe Sewer Lines (Metric)
  • ASTM C0980-13A

    Specification for:Industrial Chimney Lining Brick
  • ASTM C0985-15

    Specification for:Nonreinforced Concrete Specified Strength Culvert, Storm Drain, and Sewer Pipe
  • ASTM C0985M-15A

    Specification for:Nonreinforced Concrete Specified Strength Culvert, Storm Drain, and Sewer Pipe (Metric)
  • ASTM C0990-09R14

    Specification for:Joints for Concrete Pipe, Manholes, and Precast Box Sections Using Preformed Flexible Joint Sealants
  • ASTM C0990M-09R14

    Specification for:Joints for Concrete Pipe, Manholes, and Precast Box Sections Using Preformed Flexible Joint Sealants (Metric)
  • ASTM C1006-07R13

    Test Method for:Splitting Tensile Strength of Masonry Units
  • ASTM C1019-14

    Test Method for:Sampling and Testing Grout
  • ASTM C1037-08R15

    Practice for:Inspection of Underground Precast Concrete Utility Structures
  • ASTM C1072-13E01

    Test Methods for:Measurement of Masonry Flexural Bond Strength
  • ASTM C1080-98R14

    Specification for:Asbestos-Cement Products Other Than Fill For Cooling Towers
  • ASTM C1081-98R14

    Specification for:Asbestos-Cement Corrugated Fill For Use in Cooling Towers
  • ASTM C1082-98R14

    Specification for:Asbestos-Cement Flat Sheet for Cooling Tower Fill
  • ASTM C1088-14

    Specification for:Thin Veneer Brick Units Made From Clay or Shale
  • ASTM C1089-13

    Specification for:Spun Cast Prestressed Concrete Poles
  • ASTM C1091-03AR13

    Test Method for:Hydrostatic Infiltration Testing of Vitrified Clay Pipe Lines
  • ASTM C1093-15A

    Practice for:Accreditation of Testing Agencies for Masonry
  • ASTM C1096_C1096M-07R11E01

    Test Method for:Determination of Wood Fiber in Asbestos Cement
  • ASTM C1103-14

    Practice for:Joint Acceptance Testing of Installed Precast Concrete Pipe Sewer Lines
  • ASTM C1103M-14

    Practice for:Joint Acceptance Testing of Installed Precast Concrete Pipe Sewer Lines (Metric)
  • ASTM C1106-00R12

    Test Methods for:Chemical Resistance and Physical Properties of Carbon Brick
  • ASTM C1119_C1119M-90R15

    Test Method for:Vacuum Drainage of Asbestos-Cement Mixes
  • ASTM C1120_C1120M-98R11E01

    Test Method for:Wash Test of Asbestos
  • ASTM C1121_C1121M-04R15

    Test Method for:Turner and Newall (T and N) Wet-Length Classification of Asbestos
  • ASTM C1122_C1122M-90R15

    Test Method for:Wet Volume of Asbestos
  • ASTM C1123_C1123M-90R15

    Test Method for:Compressibility and Recovery of Asbestos
  • ASTM C1124_C1124M-90R15

    Test Method for:Kerosene Retention of Asbestos
  • ASTM C1125-89R15

    Test Method for:Penetration Index of Asbestos
  • ASTM C1131-10R15

    Practice for:Least Cost (Life Cycle) Analysis of Concrete Culvert, Storm Sewer, and Sanitary Sewer Systems
  • ASTM C1142-95R13

    Specification for:Extended Life Mortar for Unit Masonry
  • ASTM C1148-92AR14

    Test Method for:Measuring the Drying Shrinkage of Masonry Mortar
  • ASTM C1154-06R11

    Terminology for:Non-Asbestos Fiber-Reinforced Cement Products
  • ASTM C1159-98R12

    Specification for:Sulfur Polymer Cement and Sulfur Modifier for Use in Chemical-Resistant, Rigid Sulfur Concrete
  • ASTM C1160-97R12

    Specification for:Chemical-Resistant Carbon Brick
  • ASTM C1162_C1162M-90R15

    Test Method for:Loose Density of Asbestos
  • ASTM C1167-11

    Specification for:Clay Roof Tiles
  • ASTM C1180-10

    Terminology of:Mortar and Grout for Unit Masonry
  • ASTM C1185-08R12

    Test Methods for:Sampling and Testing Non-Asbestos Fiber-Cement Flat Sheet, Roofing and Siding Shingles, and Clapboards
  • ASTM C1186-08R12

    Specification for:Flat Fiber-Cement Sheets
  • ASTM C1194-03R11

    Test Method for:Compressive Strength of Architectural Cast Stone
  • ASTM C1195-03R11

    Test Method for:Absorption of Architectural Cast Stone
  • ASTM C1196-14A

    Test Method for:In Situ Compressive Stress Within Solid Unit Masonry Estimated Using Flatjack Measurements
  • ASTM C1197-14A

    Test Method for:In Situ Measurement of Masonry Deformability Properties Using the Flatjack Method
  • ASTM C1208_C1208M-11

    Specification for:Vitrified Clay Pipe and Joints for Use in Microtunneling, Sliplining, Pipe Bursting, and Tunnels
  • ASTM C1214-13

    Test Method for:Concrete Pipe Sewerlines by Negative Air Pressure (Vacuum) Test Method
  • ASTM C1214M-13

    Test Method for:Concrete Pipe Sewerlines by Negative Air Pressure (Vacuum) Test Method (Metric)
  • ASTM C1225-08R12

    Specification for:Fiber-Cement Roofing Shingles, Shakes, and Slates
  • ASTM C1227-13

    Specification for:Precast Concrete Septic Tanks
  • ASTM C1228-96R15

    Practice for:Preparing Coupons for Flexural and Washout Tests on Glass Fiber Reinforced Concrete
  • ASTM C1229-94R15

    Test Method for:Determination of Glass Fiber Content in Glass Fiber Reinforced Concrete (GFRC) (Wash-Out Test)
  • ASTM C1230-96R15

    Test Method for:Performing Tension Tests on Glass-Fiber Reinforced Concrete (GFRC) Bonding Pads
  • ASTM C1232-15A

    Terminology of:Masonry
  • ASTM C1244-11

    Test Method for:Concrete Sewer Manholes by the Negative Air Pressure (Vacuum) Test Prior to Backfill
  • ASTM C1244M-11

    Test Method for:Concrete Sewer Manholes by the Negative Air Pressure (Vacuum) Test Prior to Backfill (Metric)
  • ASTM C1261-13

    Specification for:Firebox Brick for Residential Fireplaces
  • ASTM C1262-10

    Test Method for:Evaluating the Freeze-Thaw Durability of Dry-Cast Segmental Retaining Wall Units and Related Concrete Units
  • ASTM C1272-16

    Specification for:Heavy Vehicular Paving Brick
  • ASTM C1283-15

    Practice for:Installing Clay Flue Lining
  • ASTM C1288-14

    Specification for:Discrete Non-Asbestos Fiber-Cement Interior Substrate Sheets
  • ASTM C1298-95R13

    Guide for:Design and Construction of Brick Liners for Industrial Chimneys
  • ASTM C1312-97R12

    Practice for:Making and Conditioning Chemical-Resistant Sulfur Polymer Cement Concrete Test Specimens in the Laboratory
  • ASTM C1314-14

    Test Method for:Compressive Strength of Masonry Prisms
  • ASTM C1319-14

    Specification for:Concrete Grid Paving Units
  • ASTM C1324-15

    Test Method for:Examination and Analysis of Hardened Masonry Mortar
  • ASTM C1325-14

    Specification for:Non-Asbestos Fiber-Mat Reinforced Cementitious Backer Units
  • ASTM C1357-09

    Test Methods for:Evaluating Masonry Bond Strength
  • ASTM C1364-16

    Specification for:Architectural Cast Stone
  • ASTM C1370-00R12

    Test Method for:Determining Chemical Resistance of Aggregates for Use in Chemical-Resistant Sulfur Polymer Cement Concrete and Other Chemical-Resistant Polymer Concretes
  • ASTM C1372-14A

    Specification for:Dry-Cast Segmental Retaining Wall Units
  • ASTM C1384-12A

    Specification for:Admixtures for Masonry Mortars
  • ASTM C1386

    Specification for:Precast Autoclaved Aerated Concrete (AAC) Wall Construction Units
  • ASTM C1400-11

    Guide for:Reduction of Efflorescence Potential in New Masonry Walls
  • ASTM C1403-15

    Test Method for:Rate of Water Absorption of Masonry Mortars
  • ASTM C1405-15

    Specification for:Glazed Brick (Single Fired, Brick Units)
  • ASTM C1417-15

    Specification for:Manufacture of Reinforced Concrete Sewer, Storm Drain, and Culvert Pipe for Direct Design
  • ASTM C1417M-15

    Specification for:Manufacture of Reinforced Concrete Sewer, Storm Drain, and Culvert Pipe for Direct Design (Metric)
  • ASTM C1433-15

    Specification for:Precast Reinforced Concrete Monolithic Box Sections for Culverts, Storm Drains, and Sewers
  • ASTM C1433M-15

    Specification for:Precast Reinforced Concrete Monolithic Box Sections for Culverts, Storm Drains, and Sewers (Metric)
  • ASTM C1447_C1447M-04R14

    Specification for:Non-Asbestos Fiber-Cement Underdrain Pipe
  • ASTM C1448_C1448M-05R14

    Specification for:Non-Asbestos Fiber-Cement Conduit
  • ASTM C1449_C1449M-05AR14

    Specification for:Non-Asbestos Fiber-Cement Nonpressure Sewer Pipe
  • ASTM C1450_C1450M-04R14

    Specification for:Non-Asbestos Fiber-Cement Storm Drain Pipe
  • ASTM C1452

    Specification for:Reinforced Autoclaved Aerated Concrete Elements
  • ASTM C1459-04R14

    Specification for:Performance of Non-Asbestos Fiber-Reinforced Cement Shake, Shingle, and Slate Roofing Systems
  • ASTM C1478-08R13

    Specification for:Storm Drain Resilient Connectors Between Reinforced Concrete Storm Sewer Structures, Pipes, and Laterals
  • ASTM C1478M-08AR13

    Specification for:Storm Drain Resilient Connectors Between Reinforced Concrete Storm Sewer Structures, Pipes, and Laterals (Metric)
  • ASTM C1479-13

    Practice for:Installation of Precast Concrete Sewer, Storm Drain, and Culvert Pipe Using Standard Installations
  • ASTM C1479M-13

    Practice for:Installation of Precast Concrete Sewer, Storm Drain, and Culvert Pipe Using Standard Installations (Metric)
  • ASTM C1491-14

    Specification for:Concrete Roof Pavers
  • ASTM C1492-03R09

    Specification for:Concrete Roof Tile
  • ASTM C1504-15A

    Specification for:Manufacture of Precast Reinforced Concrete Three-Sided Structures for Culverts and Storm Drains
  • ASTM C1504M-15A

    Specification for:Manufacture of Precast Reinforced Concrete Three-Sided Structures for Culverts and Storm Drains (Metric)
  • ASTM C1530_C1530M-04R14

    Specification for:Non-Asbestos Fiber-Cement Roofing Shakes, Shingles, and Slates with Designed Varying Profiles and Thicknesses
  • ASTM C1531-15

    Test Methods for:In Situ Measurement of Masonry Mortar Joint Shear Strength Index
  • ASTM C1532_C1532M-12

    Practice for:Selection, Removal, and Shipment of Manufactured Masonry Units and Masonry Specimens from Existing Construction
  • ASTM C1552-15

    Practice for:Capping Concrete Masonry Units, Related Units and Masonry Prisms for Compression Testing
  • ASTM C1560-03R09

    Test Method for:Hot Water Accelerated Aging of Glass-Fiber Reinforced Cement-Based Composites
  • ASTM C1568-08R13

    Test Method for:Wind Resistance of Concrete and Clay Roof Tiles (Mechanical Uplift Resistance Method)
  • ASTM C1569-03R09

    Test Method for:Wind Resistance of Concrete and Clay Roof Tiles (Wind Tunnel Method)
  • ASTM C1570-03R09

    Test Method for:Wind Resistance of Concrete and Clay Roof Tiles (Air Permeability Method)
  • ASTM C1577-15B

    Specification for:Precast Reinforced Concrete Monolithic Box Sections for Culverts, Storm Drains, and Sewers Designed According to AASHTO LRFD
  • ASTM C1586-05R11

    Guide for:Quality Assurance of Mortars
  • ASTM C1587_C1587M-15

    Practice for:Preparation of Field Removed Manufactured Masonry Units and Masonry Specimens for Testing
  • ASTM C1591

    Test Method for:Determination of the Modulus of Elasticity of AAC
  • ASTM C1601-14A

    Test Method for:Field Determination of Water Penetration of Masonry Wall Surfaces
  • ASTM C1613-10

    Specification for:Precast Concrete Grease Interceptor Tanks
  • ASTM C1618-13

    Test Method for:Concrete Sanitary Sewer Pipe by Negative (Vacuum) or Positive Air Pressure
  • ASTM C1618M-13

    Test Method for:Concrete Sanitary Sewer Pipe by Negative (Vacuum) or Positive Air Pressure (Metric)
  • ASTM C1619-11

    Specification for:Elastomeric Seals for Joining Concrete Structures
  • ASTM C1623-11

    Specification for:Manufactured Concrete Masonry Lintels
  • ASTM C1628-11

    Specification for:Joints for Concrete Gravity Flow Sewer Pipe, Using Rubber Gaskets
  • ASTM C1634-15

    Specification for:Concrete Facing Brick
  • ASTM C1644-06R11

    Specification for:Resilient Connectors Between Reinforced Concrete On-Site Wastewater Tanks and Pipes
  • ASTM C1645_C1645M-15

    Test Method for:Freeze-thaw and De-icing Salt Durability of Solid Concrete Interlocking Paving Units
  • ASTM C1660-10

    Specification for:Thin-bed Mortar for Autoclaved Aerated Concrete (AAC) Masonry
  • ASTM C1666_C1666M-08R15

    Specification for:Alkali Resistant (AR) Glass Fiber for GFRC and Fiber-Reinforced Concrete and Cement
  • ASTM C1670_C1670M-15

    Specification for:Adhered Manufactured Stone Masonry Veneer Units
  • ASTM C1675-11R15

    Practice for:Installation of Precast Reinforced Concrete Monolithic Box Sections for Culverts, Storm Drains, and Sewers
  • ASTM C1677-11A

    Specification for:Joints for Concrete Box, Using Rubber Gaskets
  • ASTM C1686-09

    Practice for:Installation and Testing of Reinforced Autoclaved Aerated Concrete (AAC) Units
  • ASTM C1691-11

    Specification for:Unreinforced Autoclaved Aerated Concrete (AAC) Masonry Units
  • ASTM C1692-11

    Practice for:Construction and Testing of Autoclaved Aerated Concrete (AAC) Masonry
  • ASTM C1693-11

    Specification for:Autoclaved Aerated Concrete (AAC)
  • ASTM C1694-09

    Specification for:Reinforced Autoclaved Aerated Concrete (AAC) Elements
  • ASTM C1704_C1704M-09A

    Test Method for:Sampling and Testing Structural Cementitious Panels
  • ASTM C1705_C1705M-09

    Specification for:Structural Cementitious Panels
  • ASTM C1713-15

    Specification for:Mortars for the Repair of Historic Masonry
  • ASTM C1714_C1714M-13A

    Specification for:Preblended Dry Mortar Mix for Unit Masonry
  • ASTM C1715_C1715M-15

    Test Method for:Evaluation of Water Leakage Performance of Masonry Wall Drainage Systems
  • ASTM C1716_C1716M-14

    Specification for:Compression Testing Machine Requirements for Concrete Masonry Units, Related Units, and Prisms
  • ASTM C1717-12

    Test Methods for:Conducting Strength Tests of Masonry Wall Panels
  • ASTM C1719-11

    Test Method for:Installed Precast Concrete Tanks and Accessories by the Negative Air Pressure (Vacuum) Test Prior to Backfill
  • ASTM C1731-15

    Specification for:Concrete Floor Tile
  • ASTM C1732-15

    Practice for:Installation of Concrete Floor Tiles
  • ASTM C1745_C1745M-11

    Test Method for:Measurement of Hydraulic Characteristics of Hydrodynamic Stormwater Separators and Underground Settling Devices
  • ASTM C1746_C1746M-12

    Test Method for:Measurement of Suspended Sediment Removal Efficiency of Hydrodynamic Stormwater Separators and Underground Settling Devices
  • ASTM C1765-13

    Specification for:Steel Fiber Reinforced Concrete Culvert, Storm Drain, and Sewer Pipe
  • ASTM C1780-15A

    Practice for:Installation Methods for Adhered Manufactured Stone Masonry Veneer
  • ASTM C1781_C1781M-15

    Test Method for:Surface Infiltration Rate of Permeable Unit Pavement Systems
  • ASTM C1786-14

    Specification for:Segmental Precast Reinforced Concrete Box Sections for Culverts, Storm Drains, and Sewers Designed According to AASHTO LRFD
  • ASTM C1790-15

    Specification for:Fly Ash Facing Brick
  • ASTM C1791-15

    Guide for:Reduction of Efflorescence Potential in New Unit Pavement Systems
  • ASTM C1802-14E01

    Specification for:Design, Testing, Manufacture, Selection, and Installation of Fabricated Metal Access Hatches for Utility, Water, and Wastewater Structures
  • ASTM C1804-14E01

    Specification for:Spun Cast Prestressed Concrete Bases for Tapered Steel Lighting Poles
  • ASTM C1818-15

    Specification for:Synthetic Fiber Reinforced Concrete Culvert, Storm Drain, and Sewer Pipe
  • ASTM D0299_D0299M-04R09E01

    Specification for:Asbestos Yarns
  • ASTM D0315_D0315M-95R09E01

    Specification for:Woven Asbestos Tape
  • ASTM D0375_D0375M-95R09E01

    Specification for:Asbestos Roving
  • ASTM D0628_D0628M-95R09E01

    Specification for:Asbestos Tubular Sleeving
  • ASTM D1061_D1061M-95R09E01

    Specification for:Asbestos Lap
  • ASTM D1118_D1118M-95R09E01

    Test Method for:Magnetic Rating of Asbestos Fiber and Asbestos Textiles
  • ASTM D1571_D1571M-95R09E01

    Specification for:Woven Asbestos Cloth
  • ASTM D1573_D1573M-95R09E01

    Test Method for:Heat Aging of Asbestos Textiles
  • ASTM D1918_D1918M-95R09E01

    Test Method for:Asbestos Content of Asbestos Textiles
  • ASTM D2100_D2100M-95R09E01

    Specification for:Asbestos Textiles Used for Electrical Insulating Purposes
  • ASTM D2589_D2589M-88R11E01

    Test Method for:McNett Wet Classification of Dual Asbestos Fiber
  • ASTM D2590_D2590M-98R11E01

    Test Method for:Sampling Chrysotile Asbestos
  • ASTM D2752_D2752M-88R11E01

    Test Methods for:Air Permeability of Asbestos Fibers
  • ASTM D2946-01R10

    Terminology for:Asbestos and Asbestos–Cement Products
  • ASTM D2947_D2947M-88R11E01

    Test Method for:Screen Analysis of Asbestos Fibers
  • ASTM D2985_D2985M-92R11E01

    Test Method for:Color of Asbestos
  • ASTM D2987_D2987M-88R11E01

    Test Method for:Moisture Content of Asbestos Fiber
  • ASTM D3639_D3639M-92R11E01

    Test Method for:Classification of Asbestos by Quebec Standard Test
  • ASTM D3752-98R11

    Test Method for:Strength Imparted by Asbestos to a Cementitious Matrix
  • ASTM D3880_D3880M-90R09E01

    Test Method for:Asbestos Strength Units
  • ASTM E0514_E0514M-14A

    Test Method for:Water Penetration and Leakage Through Masonry
  • ASTM E0518_E0518M-15

    Test Methods for:Flexural Bond Strength of Masonry
  • ASTM E0519_E0519M-15

    Test Method for:Diagonal Tension (Shear) in Masonry Assemblages