한국표준정보망(KSSN)

ASTM Annual Book 수록 리스트

핸드북  >  ASTM

    04.06 : 보온, 방음

  • ASTM C0163-05R10

    Practice for:Mixing Thermal Insulating Cement Samples
  • ASTM C0165-07R12

    Test Method for:Measuring Compressive Properties of Thermal Insulations
  • ASTM C0166-05R10

    Test Method for:Covering Capacity and Volume Change Upon Drying of Thermal Insulating Cement
  • ASTM C0167-15

    Test Methods for:Thickness and Density of Blanket or Batt Thermal Insulations
  • ASTM C0168-15A

    Terminology Relating to:Thermal Insulation
  • ASTM C0177-13

    Test Method for:Steady-State Heat Flux Measurements and Thermal Transmission Properties by Means of the Guarded-Hot-Plate Apparatus
  • ASTM C0195-07R13

    Specification for:Mineral Fiber Thermal Insulating Cement
  • ASTM C0196-00R10

    Specification for:Expanded or Exfoliated Vermiculite Thermal Insulating Cement
  • ASTM C0203-05AR12

    Test Methods for:Breaking Load and Flexural Properties of Block-Type Thermal Insulation
  • ASTM C0208-12

    Specification for:Cellulosic Fiber Insulating Board
  • ASTM C0209-15

    Test Methods for:Cellulosic Fiber Insulating Board
  • ASTM C0240-08R12

    Test Methods of:Testing Cellular Glass Insulation Block
  • ASTM C0302-13

    Test Method for:Density and Dimensions of Preformed Pipe-Covering-Type Thermal Insulation
  • ASTM C0303-10

    Test Method for:Dimensions and Density of Preformed Block and Board–Type Thermal Insulation
  • ASTM C0335_C0335M-10E01

    Test Method for:Steady-State Heat Transfer Properties of Pipe Insulation
  • ASTM C0356-10

    Test Method for:Linear Shrinkage of Preformed High-Temperature Thermal Insulation Subjected to Soaking Heat
  • ASTM C0367_C0367M-09

    Test Methods for:Strength Properties of Prefabricated Architectural Acoustical Tile or Lay-In Ceiling Panels
  • ASTM C0384-04R11

    Test Method for:Impedance and Absorption of Acoustical Materials by Impedance Tube Method
  • ASTM C0390-08R13

    Practice for:Sampling and Acceptance of Thermal Insulation Lots
  • ASTM C0411-11

    Test Method for:Hot-Surface Performance of High-Temperature Thermal Insulation
  • ASTM C0419-08R13

    Practice for:Making and Curing Test Specimens of Mastic Thermal Insulation Coatings
  • ASTM C0421-08R14

    Test Method for:Tumbling Friability of Preformed Block-Type and Preformed Pipe-Covering-Type Thermal Insulation
  • ASTM C0423-09A

    Test Method for:Sound Absorption and Sound Absorption Coefficients by the Reverberation Room Method
  • ASTM C0447-15

    Practice for:Estimating the Maximum Use Temperature of Thermal Insulations
  • ASTM C0449-07R13

    Specification for:Mineral Fiber Hydraulic-Setting Thermal Insulating and Finishing Cement
  • ASTM C0450-08R14

    Practice for:Fabrication of Thermal Insulating Fitting Covers for NPS Piping, and Vessel Lagging
  • ASTM C0461-81R15

    Test Methods for:Mastics and Coatings Used With Thermal Insulation
  • ASTM C0488-05R10

    Test Method for:Conducting Exterior Exposure Tests of Finishes for Thermal Insulation
  • ASTM C0516-08R13E01

    Specification for:Vermiculite Loose Fill Thermal Insulation
  • ASTM C0518-15

    Test Method for:Steady-State Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus
  • ASTM C0520-15

    Test Methods for:Density of Granular Loose Fill Insulations
  • ASTM C0522-03R09E01

    Test Method for:Airflow Resistance of Acoustical Materials
  • ASTM C0533-13

    Specification for:Calcium Silicate Block and Pipe Thermal Insulation
  • ASTM C0534_C0534M-14

    Specification for:Preformed Flexible Elastomeric Cellular Thermal Insulation in Sheet and Tubular Form
  • ASTM C0547-15

    Specification for:Mineral Fiber Pipe Insulation
  • ASTM C0549-06R12

    Specification for:Perlite Loose Fill Insulation
  • ASTM C0550-15

    Test Method for:Measuring Trueness and Squareness of Rigid Block and Board Thermal Insulation
  • ASTM C0552-15

    Specification for:Cellular Glass Thermal Insulation
  • ASTM C0553-13

    Specification for:Mineral Fiber Blanket Thermal Insulation for Commercial and Industrial Applications
  • ASTM C0578-15B

    Specification for:Rigid, Cellular Polystyrene Thermal Insulation
  • ASTM C0585-10

    Practice for:Inner and Outer Diameters of Thermal Insulation for Nominal Sizes of Pipe and Tubing
  • ASTM C0591-15

    Specification for:Unfaced Preformed Rigid Cellular Polyisocyanurate Thermal Insulation
  • ASTM C0592-13

    Specification for:Mineral Fiber Blanket Insulation and Blanket-Type Pipe Insulation (Metal-Mesh Covered) (Industrial Type)
  • ASTM C0610-15

    Specification for:Molded Expanded Perlite Block and Pipe Thermal Insulation
  • ASTM C0612-14

    Specification for:Mineral Fiber Block and Board Thermal Insulation
  • ASTM C0634-13

    Terminology Relating to:Building and Environmental Acoustics
  • ASTM C0635_C0635M-13A

    Specification for:the Manufacture, Performance, and Testing of Metal Suspension Systems for Acoustical Tile and Lay-in Panel Ceilings
  • ASTM C0636_C0636M-13

    Practice for:Installation of Metal Ceiling Suspension Systems for Acoustical Tile and Lay-In Panels
  • ASTM C0647-08R13

    Guide to:Properties and Tests of Mastics and Coating Finishes for Thermal Insulation
  • ASTM C0653-97R12

    Guide for:Determination of the Thermal Resistance of Low-Density Blanket-Type Mineral Fiber Insulation
  • ASTM C0656-07R13

    Specification for:Structural Insulating Board, Calcium Silicate
  • ASTM C0665-12

    Specification for:Mineral-Fiber Blanket Thermal Insulation for Light Frame Construction and Manufactured Housing
  • ASTM C0667-09R14

    Specification for:Prefabricated Reflective Insulation Systems for Equipment and Pipe Operating at Temperatures above Ambient Air
  • ASTM C0680-14

    Practice for:Estimate of the Heat Gain or Loss and the Surface Temperatures of Insulated Flat, Cylindrical, and Spherical Systems by Use of Computer Programs
  • ASTM C0686-90R11E01

    Test Method for:Parting Strength of Mineral Fiber Batt- and Blanket-Type Insulation
  • ASTM C0687-12

    Practice for:Determination of Thermal Resistance of Loose-Fill Building Insulation
  • ASTM C0692-13

    Test Method for:Evaluating the Influence of Thermal Insulations on External Stress Corrosion Cracking Tendency of Austenitic Stainless Steel
  • ASTM C0726-12

    Specification for:Mineral Wool Roof Insulation Board
  • ASTM C0727-12

    Practice for:Installation and Use of Reflective Insulation in Building Constructions
  • ASTM C0728-15

    Specification for:Perlite Thermal Insulation Board
  • ASTM C0739-11

    Specification for:Cellulosic Fiber Loose-Fill Thermal Insulation
  • ASTM C0740_C0740M-13

    Guide for:Evacuated Reflective Insulation In Cryogenic Service
  • ASTM C0755-10R15

    Practice for:Selection of Water Vapor Retarders for Thermal Insulation
  • ASTM C0764-11

    Specification for:Mineral Fiber Loose-Fill Thermal Insulation
  • ASTM C0795-08R13

    Specification for:Thermal Insulation for Use in Contact with Austenitic Stainless Steel
  • ASTM C0800-14

    Specification for:Fibrous Glass Blanket Insulation (Aircraft Type)
  • ASTM C0835-06R13E01

    Test Method for:Total Hemispherical Emittance of Surfaces up to 1400°C
  • ASTM C0846-94R09

    Practice for:Application of Cellulosic Fiber Insulating Board for Wall Sheathing
  • ASTM C0870-11

    Practice for:Conditioning of Thermal Insulating Materials
  • ASTM C0871-11E01

    Test Methods for:Chemical Analysis of Thermal Insulation Materials for Leachable Chloride, Fluoride, Silicate, and Sodium Ions
  • ASTM C0892-10

    Specification for:High-Temperature Fiber Blanket Thermal Insulation
  • ASTM C0916-14

    Specification for:Adhesives for Duct Thermal Insulation
  • ASTM C0921-10R15

    Practice for:Determining the Properties of Jacketing Materials for Thermal Insulation
  • ASTM C0929-14

    Practice for:Handling, Transporting, Shipping, Storage, Receiving, and Application of Thermal Insulation Materials For Use in Contact with Austenitic Stainless Steel
  • ASTM C0930-12

    Classification of:Potential Health and Safety Concerns Associated With Thermal Insulation Materials and Accessories
  • ASTM C0945-05R12

    Practice for:Design Considerations and Spray Application of a Rigid Cellular Polyurethane Insulation System on Outdoor Service Vessels
  • ASTM C0950_C0950M-08R12

    Practice for:Repair of a Rigid Cellular Polyurethane Insulation System on Outdoor Service Vessels
  • ASTM C0991-15

    Specification for:Flexible Fibrous Glass Insulation for Metal Buildings
  • ASTM C1014-08R13

    Specification for:Spray-Applied Mineral Fiber Thermal and Sound Absorbing Insulation
  • ASTM C1015-06R11E01

    Practice for:Installation of Cellulosic and Mineral Fiber Loose-Fill Thermal Insulation
  • ASTM C1029-15

    Specification for:Spray-Applied Rigid Cellular Polyurethane Thermal Insulation
  • ASTM C1041-10

    Practice for:In-Situ Measurements of Heat Flux in Industrial Thermal Insulation Using Heat Flux Transducers
  • ASTM C1043-06R10

    Practice for:Guarded-Hot-Plate Design Using Circular Line-Heat Sources
  • ASTM C1044-12

    Practice for:Using a Guarded-Hot-Plate Apparatus or Thin-Heater Apparatus in the Single-Sided Mode
  • ASTM C1045-07R13

    Practice for:Calculating Thermal Transmission Properties Under Steady-State Conditions
  • ASTM C1046-95R13

    Practice for:In-Situ Measurement of Heat Flux and Temperature on Building Envelope Components
  • ASTM C1055-03R14

    Guide for:Heated System Surface Conditions that Produce Contact Burn Injuries
  • ASTM C1057-12

    Practice for:Determination of Skin Contact Temperature from Heated Surfaces Using a Mathematical Model and Thermesthesiometer
  • ASTM C1058_C1058M-10R15

    Practice for:Selecting Temperatures for Evaluating and Reporting Thermal Properties of Thermal Insulation
  • ASTM C1060-11AR15

    Practice for:Thermographic Inspection of Insulation Installations in Envelope Cavities of Frame Buildings
  • ASTM C1071-12

    Specification for:Fibrous Glass Duct Lining Insulation (Thermal and Sound Absorbing Material)
  • ASTM C1086-09

    Specification for:Glass Fiber Mechanically Bonded Felt Thermal Insulation
  • ASTM C1101_C1101M-06R12

    Test Methods for:Classifying the Flexibility or Rigidity of Mineral Fiber Blanket and Board Insulation
  • ASTM C1104_C1104M-13A

    Test Method for:Determining the Water Vapor Sorption of Unfaced Mineral Fiber Insulation
  • ASTM C1114-06R13

    Test Method for:Steady-State Thermal Transmission Properties by Means of the Thin-Heater Apparatus
  • ASTM C1126-15

    Specification for:Faced or Unfaced Rigid Cellular Phenolic Thermal Insulation
  • ASTM C1129-12

    Practice for:Estimation of Heat Savings by Adding Thermal Insulation to Bare Valves and Flanges
  • ASTM C1130-07R12

    Practice for:Calibrating Thin Heat Flux Transducers
  • ASTM C1134-90R12E01

    Test Method for:Water Retention of Rigid Thermal Insulations Following Partial Immersion
  • ASTM C1136-12

    Specification for:Flexible, Low Permeance Vapor Retarders for Thermal Insulation
  • ASTM C1139-14

    Specification for:Fibrous Glass Thermal Insulation and Sound Absorbing Blanket and Board for Military Applications
  • ASTM C1146-09R13

    Guide for:Prefabricated Panel and H–bar Insulation Systems for Vessels, Ducts and Equipment Operating at Temperatures Above Ambient Air
  • ASTM C1149-11

    Specification for:Self-Supported Spray Applied Cellulosic Thermal Insulation
  • ASTM C1153-10R15

    Practice for:Location of Wet Insulation in Roofing Systems Using Infrared Imaging
  • ASTM C1155-95R13

    Practice for:Determining Thermal Resistance of Building Envelope Components from the In-Situ Data
  • ASTM C1199-14

    Test Method for:Measuring the Steady-State Thermal Transmittance of Fenestration Systems Using Hot Box Methods
  • ASTM C1224-15

    Specification for:Reflective Insulation for Building Applications
  • ASTM C1258-08R13

    Test Method for:Elevated Temperature and Humidity Resistance of Vapor Retarders for Insulation
  • ASTM C1263-95R15

    Test Method for:Thermal Integrity of Flexible Water Vapor Retarders
  • ASTM C1289-16

    Specification for:Faced Rigid Cellular Polyisocyanurate Thermal Insulation Board
  • ASTM C1290-11

    Specification for:Flexible Fibrous Glass Blanket Insulation Used to Externally Insulate HVAC Ducts
  • ASTM C1302-04R11

    Guide for:Selection and Use of Keywords for Thermal Insulation Test Methods and Standards
  • ASTM C1303_C1303M-15

    Test Method for:Predicting Long-Term Thermal Resistance of Closed-Cell Foam Insulation
  • ASTM C1304-08R13

    Test Method for:Assessing the Odor Emission of Thermal Insulation Materials
  • ASTM C1313_C1313M-13

    Specification for:Sheet Radiant Barriers for Building Construction Applications
  • ASTM C1320-10

    Practice for:Installation of Mineral Fiber Batt and Blanket Thermal Insulation for Light Frame Construction
  • ASTM C1321-15

    Practice for:Installation and Use of Interior Radiation Control Coating Systems (IRCCS) in Building Construction
  • ASTM C1335-12

    Test Method for:Measuring Non-Fibrous Content of Man-Made Rock and Slag Mineral Fiber Insulation
  • ASTM C1338-14

    Test Method for:Determining Fungi Resistance of Insulation Materials and Facings
  • ASTM C1340_C1340M-10R15

    Practice for:Estimation of Heat Gain or Loss Through Ceilings Under Attics Containing Radiant Barriers by Use of a Computer Program
  • ASTM C1363-11

    Test Method for:Thermal Performance of Building Materials and Envelope Assemblies by Means of a Hot Box Apparatus
  • ASTM C1371-15

    Test Method for:Determination of Emittance of Materials Near Room Temperature Using Portable Emissometers
  • ASTM C1373_C1373M-11

    Practice for:Determination of Thermal Resistance of Attic Insulation Systems Under Simulated Winter Conditions
  • ASTM C1374-14

    Test Method for:Determination of Installed Thickness of Pneumatically Applied Loose-Fill Building Insulation
  • ASTM C1393-14

    Specification for:Perpendicularly Oriented Mineral Fiber Roll and Sheet Thermal Insulation for Pipes and Tanks
  • ASTM C1409-12

    Guide for:Measuring and Estimating Quantities of Insulated Piping and Components
  • ASTM C1410-14

    Specification for:Cellular Melamine Thermal and Sound-Absorbing Insulation
  • ASTM C1423-15A

    Guide for:Selecting Jacketing Materials for Thermal Insulation
  • ASTM C1427-13

    Specification for:Extruded Preformed Flexible Cellular Polyolefin Thermal Insulation in Sheet and Tubular Form
  • ASTM C1482-12

    Specification for:Polyimide Flexible Cellular Thermal and Sound Absorbing Insulation
  • ASTM C1483_C1483M-04R09

    Specification for:Exterior Solar Radiation Control Coatings on Buildings
  • ASTM C1484-10

    Specification for:Vacuum Insulation Panels
  • ASTM C1485-13

    Test Method for:Critical Radiant Flux of Exposed Attic Floor Insulation Using an Electric Radiant Heat Energy Source
  • ASTM C1488

    Practice for:Simulated Aging of Cellulosic Loose-Fill Insulation
  • ASTM C1497-12

    Specification for:Cellulosic Fiber Stabilized Thermal Insulation
  • ASTM C1498-04AR10E01

    Test Method for:Hygroscopic Sorption Isotherms of Building Materials
  • ASTM C1511-15

    Test Method for:Determining the Water Retention (Repellency) Characteristics of Fibrous Glass Insulation (Aircraft Type)
  • ASTM C1512-10R15E01

    Test Method for:Characterizing the Effect of Exposure to Environmental Cycling on Thermal Performance of Insulation Products
  • ASTM C1534-14

    Specification for:Flexible Polymeric Foam Sheet Insulation Used as a Thermal and Sound Absorbing Liner for Duct Systems
  • ASTM C1549-09R14

    Test Method for:Determination of Solar Reflectance Near Ambient Temperature Using a Portable Solar Reflectometer
  • ASTM C1558-12

    Guide for:Development of Standard Data Records for Computerization of Thermal Transmission Test Data for Thermal Insulation
  • ASTM C1559-15

    Test Method for:Determining Wicking of Fibrous Glass Blanket Insulation (Aircraft Type)
  • ASTM C1574-04R13

    Guide for:Determining Blown Density of Pneumatically Applied Loose-Fill Mineral Fiber Thermal Insulation
  • ASTM C1594-11

    Specification for:Polyimide Rigid Cellular Thermal Insulation
  • ASTM C1616-07R12

    Test Method for:Determining the Moisture Content of Organic and Inorganic Insulation Materials by Weight
  • ASTM C1617-15

    Practice for:Quantitative Accelerated Laboratory Evaluation of Extraction Solutions Containing Ions Leached from Thermal Insulation on Aqueous Corrosion of Metals
  • ASTM C1630-11

    Guide for:Development of Coverage Charts for Loose-Fill Thermal Building Insulations
  • ASTM C1639-10A

    Specification for:Fabrication Of Cellular Glass Pipe And Tubing Insulation
  • ASTM C1667-15

    Test Method for:Using Heat Flow Meter Apparatus to Measure the Center-of-Panel Thermal Transmission Properties of Vacuum Insulation Panels
  • ASTM C1668-13A

    Specification for:Externally Applied Reflective Insulation Systems on Rigid Duct in Heating, Ventilation, and Air Conditioning (HVAC) Systems
  • ASTM C1676_C1676M-14

    Specification for:Microporous Thermal Insulation
  • ASTM C1685-15

    Specification for:Pneumatically Applied High-Temperature Fiber Thermal Insulation for Industrial Applications
  • ASTM C1695-10R15

    Specification for:Fabrication of Flexible Removable and Reusable Blanket Insulation for Hot Service
  • ASTM C1696-15

    Guide for:Industrial Thermal Insulation Systems
  • ASTM C1699-09R15

    Test Method for:Moisture Retention Curves of Porous Building Materials Using Pressure Plates
  • ASTM C1710-15

    Guide for:Installation of Flexible Closed Cell Preformed Insulation in Tube and Sheet Form
  • ASTM C1728-13

    Specification for:Flexible Aerogel Insulation
  • ASTM C1729-15A

    Specification for:Aluminum Jacketing for Insulation
  • ASTM C1729M-15

    Specification for:Aluminum Jacketing for Insulation
  • ASTM C1743-12

    Practice for:Installation and Use of Radiant Barrier Systems (RBS) in Residential Building Construction
  • ASTM C1744-12

    Practice for:Installation and Use of Radiant Barrier Systems (RBS) in Commercial/Industrial Building Construction
  • ASTM C1763-14

    Test Method for:Water Absorption by Immersion of Thermal Insulation Materials
  • ASTM C1767-15

    Specification for:Stainless Steel Jacketing for Insulation
  • ASTM C1767M-15

    Specification for:Stainless Steel Jacketing for Insulation
  • ASTM C1774-13

    Guide for:Thermal Performance Testing of Cryogenic Insulation Systems
  • ASTM C1775-14

    Specification for:Laminate Protective Jacket and Tape for Use over Thermal Insulation for Outdoor Applications
  • ASTM C1784-14

    Test Method for:Using a Heat Flow Meter Apparatus for Measuring Thermal Storage Properties of Phase Change Materials and Products
  • ASTM C1785-15

    Test Method for:Concentration of Pinhole Detections in Moisture Barriers on Metal Jacketing
  • ASTM C1794-15

    Test Methods for:Determination of the Water Absorption Coefficient by Partial Immersion
  • ASTM C1809-15

    Practice for:Preparation of Specimens and Reporting of Results for Permeance Testing of Pressure Sensitive Adhesive Sealed Joints in Insulation Vapor Retarders
  • ASTM C1822-15

    Specification for:Insulating Covers on Accessible Lavatory Piping
  • ASTM E0090-09

    Test Method for:Laboratory Measurement of Airborne Sound Transmission Loss of Building Partitions and Elements
  • ASTM E0096_E0096M-15

    Test Methods for:Water Vapor Transmission of Materials
  • ASTM E0336-16

    Test Method for:Measurement of Airborne Sound Attenuation between Rooms in Buildings
  • ASTM E0413-10

    Classification for:Rating Sound Insulation
  • ASTM E0477-13E01

    Test Method for:Laboratory Measurements of Acoustical and Airflow Performance of Duct Liner Materials and Prefabricated Silencers
  • ASTM E0492-09

    Test Method for:Laboratory Measurement of Impact Sound Transmission Through Floor-Ceiling Assemblies Using the Tapping Machine
  • ASTM E0557-12

    Guide for:Architectural Design and Installation Practices for Sound Isolation between Spaces Separated by Operable Partitions
  • ASTM E0580_E0580M-14

    Practice for:Installation of Ceiling Suspension Systems for Acoustical Tile and Lay-in Panels in Areas Subject to Earthquake Ground Motions
  • ASTM E0596-96R09

    Test Method for:Laboratory Measurement of Noise Reduction of Sound-Isolating Enclosures
  • ASTM E0756-05R10

    Test Method for:Measuring Vibration-Damping Properties of Materials
  • ASTM E0795-05R12

    Practices for:Mounting Test Specimens During Sound Absorption Tests
  • ASTM E0966-10E01

    Guide for:Field Measurements of Airborne Sound Attenuation of Building Facades and Facade Elements
  • ASTM E0989-06R12

    Classification for:Determination of Impact Insulation Class (IIC)
  • ASTM E1007-14

    Test Method for:Field Measurement of Tapping Machine Impact Sound Transmission Through Floor-Ceiling Assemblies and Associated Support Structures
  • ASTM E1014-12

    Guide for:Measurement of Outdoor A-Weighted Sound Levels
  • ASTM E1042-02R14

    Classification for:Acoustically Absorptive Materials Applied by Trowel or Spray
  • ASTM E1050-12

    Test Method for:Impedance and Absorption of Acoustical Materials Using a Tube, Two Microphones and a Digital Frequency Analysis System
  • ASTM E1110-06R11

    Classification for:Determination of Articulation Class
  • ASTM E1111_E1111M-14

    Test Method for:Measuring the Interzone Attenuation of Open Office Components
  • ASTM E1123-86R09

    Practices for:Mounting Test Specimens for Sound Transmission Loss Testing of Naval and Marine Ship Bulkhead Treatment Materials
  • ASTM E1124-10

    Test Method for:Field Measurement of Sound Power Level by the Two-Surface Method
  • ASTM E1130-08

    Test Method for:Objective Measurement of Speech Privacy in Open Plan Spaces Using Articulation Index
  • ASTM E1179-13

    Specification for:Sound Sources Used for Testing Open Office Components and Systems
  • ASTM E1222-90R09

    Test Method for:Laboratory Measurement of the Insertion Loss of Pipe Lagging Systems
  • ASTM E1264-14

    Classification for:Acoustical Ceiling Products
  • ASTM E1265-04R13

    Test Method for:Measuring Insertion Loss of Pneumatic Exhaust Silencers
  • ASTM E1289-08

    Specification for:Reference Specimen for Sound Transmission Loss
  • ASTM E1332-10A

    Classification for:Rating Outdoor-Indoor Sound Attenuation
  • ASTM E1374-06R11

    Guide for:Open Office Acoustics and Applicable ASTM Standards
  • ASTM E1414_E1414M-11AE01

    Test Method for:Airborne Sound Attenuation Between Rooms Sharing a Common Ceiling Plenum
  • ASTM E1503-14

    Test Method for:Conducting Outdoor Sound Measurements Using a Digital Statistical Sound Analysis System
  • ASTM E1573-09

    Test Method for:Evaluating Masking Sound in Open Offices Using A-Weighted and One-Third Octave Band Sound Pressure Levels
  • ASTM E1574-98R14

    Test Method for:Measurement of Sound in Residential Spaces
  • ASTM E1686-10E01

    Guide for:Applying Environmental Noise Measurement Methods and Criteria
  • ASTM E1704-95R10

    Guide for:Specifying Acoustical Performance of Sound-Isolating Enclosures
  • ASTM E1780-12

    Guide for:Measuring Outdoor Sound Received from a Nearby Fixed Source
  • ASTM E2179-03R09

    Test Method for:Laboratory Measurement of the Effectiveness of Floor Coverings in Reducing Impact Sound Transmission Through Concrete Floors
  • ASTM E2202-02R09

    Practice for:Measurement of Equipment-Generated Continuous Noise for Assessment of Health Hazards
  • ASTM E2235-04R12

    Test Method for:Determination of Decay Rates for Use in Sound Insulation Test Methods
  • ASTM E2249-02R08

    Test Method for:Laboratory Measurement of Airborne Transmission Loss of Building Partitions and Elements Using Sound Intensity
  • ASTM E2459-05R11

    Guide for:Measurement of In-Duct Sound Pressure Levels from Large Industrial Gas Turbines and Fans
  • ASTM E2611-09

    Test Method for:Measurement of Normal Incidence Sound Transmission of Acoustical Materials Based on the Transfer Matrix Method
  • ASTM E2638-10

    Test Method for:Objective Measurement of the Speech Privacy Provided by a Closed Room
  • ASTM E2963-15

    Test Method for:Laboratory Measurement of Acoustical Effectiveness of Ship Noise Treatments Laboratory Measurement of Acoustical Effectiveness for Marine Bulkhead and Deck Treatments
  • ASTM E2964-14

    Test Method for:Measurement of the Normalized Insertion Loss of Doors