한국표준정보망(KSSN)

ASTM Annual Book 수록 리스트

핸드북  >  ASTM

    04.07 : 건축실 및 실링재:소방재규정

  • ASTM C0097_C0097M-15

    Test Methods for:Absorption and Bulk Specific Gravity of Dimension Stone
  • ASTM C0099_C0099M-15

    Test Method for:Modulus of Rupture of Dimension Stone
  • ASTM C0119-14E01

    Terminology Relating to:Dimension Stone
  • ASTM C0120_C0120M-15A

    Test Methods for:Flexure Testing of Structural and Roofing Slate
  • ASTM C0121_C0121M-15

    Test Method for:Water Absorption of Slate
  • ASTM C0170_C0170M-15B

    Test Method for:Compressive Strength of Dimension Stone
  • ASTM C0217_C0217M-15A

    Test Method for:Weather Resistance of Slate
  • ASTM C0241_C0241M-15E01

    Test Method for:Abrasion Resistance of Stone Subjected to Foot Traffic
  • ASTM C0406_C0406M-15

    Specification for:Roofing Slate
  • ASTM C0503_C0503M-15

    Specification for:Marble Dimension Stone
  • ASTM C0509-06R15

    Specification for:Elastomeric Cellular Preformed Gasket and Sealing Material
  • ASTM C0510-05AR11

    Test Method for:Staining and Color Change of Single- or Multicomponent Joint Sealants
  • ASTM C0542-05R11

    Specification for:Lock-Strip Gaskets
  • ASTM C0568_C0568M-15

    Specification for:Limestone Dimension Stone
  • ASTM C0603-14

    Test Method for:Extrusion Rate and Application Life of Elastomeric Sealants
  • ASTM C0615_C0615M-11

    Specification for:Granite Dimension Stone
  • ASTM C0616_C0616M-15

    Specification for:Quartz-Based Dimension Stone
  • ASTM C0629_C0629M-15

    Specification for:Slate Dimension Stone
  • ASTM C0639-15

    Test Method for:Rheological (Flow) Properties of Elastomeric Sealants
  • ASTM C0661-15

    Test Method for:Indentation Hardness of Elastomeric-Type Sealants by Means of a Durometer
  • ASTM C0679-15

    Test Method for:Tack-Free Time of Elastomeric Sealants
  • ASTM C0681-14

    Test Method for:Volatility of Oil- and Resin-Based, Knife-Grade, Channel Glazing Compounds
  • ASTM C0711-14

    Test Method for:Low-Temperature Flexibility and Tenacity of One-Part, Elastomeric, Solvent-Release Type Sealants
  • ASTM C0712-14

    Test Method for:Bubbling of One-Part, Elastomeric, Solvent-Release Type Sealants
  • ASTM C0716-06R15

    Specification for:Installing Lock-Strip Gaskets and Infill Glazing Materials
  • ASTM C0717-14A

    Terminology of:Building Seals and Sealants
  • ASTM C0719-14

    Test Method for:Adhesion and Cohesion of Elastomeric Joint Sealants Under Cyclic Movement (Hockman Cycle)
  • ASTM C0731-15

    Test Method for:Extrudability, After Package Aging, of Latex Sealants
  • ASTM C0732-06R12

    Test Method for:Aging Effects of Artificial Weathering on Latex Sealants
  • ASTM C0734-15

    Test Method for:Low-Temperature Flexibility of Latex Sealants After Artificial Weathering
  • ASTM C0736-12

    Test Method for:Extension-Recovery and Adhesion of Latex Sealants
  • ASTM C0765-97R15

    Test Method for:Low-Temperature Flexibility of Preformed Tape Sealants
  • ASTM C0771-14

    Test Method for:Weight Loss After Heat Aging of Preformed Tape Sealants
  • ASTM C0772-03R14

    Test Method for:Oil Migration or Plasticizer Bleed-Out of Preformed Tape Sealants
  • ASTM C0782-13

    Test Method for:Softness of Preformed Tape Sealants
  • ASTM C0792-15

    Test Method for:Effects of Heat Aging on Weight Loss, Cracking, and Chalking of Elastomeric Sealants
  • ASTM C0793-05R10

    Test Method for:Effects of Laboratory Accelerated Weathering on Elastomeric Joint Sealants
  • ASTM C0794-15A

    Test Method for:Adhesion-in-Peel of Elastomeric Joint Sealants
  • ASTM C0834-14

    Specification for:Latex Sealants
  • ASTM C0864-05R15

    Specification for:Dense Elastomeric Compression Seal Gaskets, Setting Blocks, and Spacers
  • ASTM C0879-03R14

    Test Methods for:Release Papers Used with Preformed Tape Sealants
  • ASTM C0880_C0880M-15

    Test Method for:Flexural Strength of Dimension Stone
  • ASTM C0907-03R12

    Test Method for:Tensile Adhesive Strength of Preformed Tape Sealants by Disk Method
  • ASTM C0908-15

    Test Method for:Yield Strength of Preformed Tape Sealants
  • ASTM C0910-06R11

    Test Method for:Bond and Cohesion of One-Part Elastomeric Solvent Release-Type Sealants
  • ASTM C0919-12

    Practice for:Use of Sealants in Acoustical Applications
  • ASTM C0920-14A

    Specification for:Elastomeric Joint Sealants
  • ASTM C0961-15

    Test Method for:Lap Shear Strength of Sealants
  • ASTM C0963-00R12

    Specification for:Packaging, Identification, Shipment, and Storage of Lock-Strip Gaskets
  • ASTM C0964-07R12

    Guide for:Lock-Strip Gasket Glazing
  • ASTM C0972-00R11

    Test Method for:Compression-Recovery of Tape Sealant
  • ASTM C1016-14

    Test Method for:Determination of Water Absorption of Sealant Backing (Joint Filler) Material
  • ASTM C1021-08R14

    Practice for:Laboratories Engaged in Testing of Building Sealants
  • ASTM C1083-06R15

    Test Method for:Water Absorption of Cellular Elastomeric Gaskets and Sealing Materials
  • ASTM C1087-00R11

    Test Method for:Determining Compatibility of Liquid-Applied Sealants with Accessories Used in Structural Glazing Systems
  • ASTM C1115-06R11

    Specification for:Dense Elastomeric Silicone Rubber Gaskets and Accessories
  • ASTM C1135-15

    Test Method for:Determining Tensile Adhesion Properties of Structural Sealants
  • ASTM C1166-06R11

    Test Method for:Flame Propagation of Dense and Cellular Elastomeric Gaskets and Accessories
  • ASTM C1183_C1183M-13

    Test Method for:Extrusion Rate of Elastomeric Sealants
  • ASTM C1184-14

    Specification for:Structural Silicone Sealants
  • ASTM C1193-16

    Guide for:Use of Joint Sealants
  • ASTM C1201_C1201M-15

    Test Method for:Structural Performance of Exterior Dimension Stone Cladding Systems by Uniform Static Air Pressure Difference
  • ASTM C1216_C1216M-13

    Test Method for:Adhesion and Cohesion of One-Part Elastomeric Solvent Release Sealants
  • ASTM C1241-14

    Test Method for:Volume Shrinkage of Latex Sealants During Cure
  • ASTM C1242-15A

    Guide for:Selection, Design, and Installation of Dimension Stone Attachment Systems
  • ASTM C1246-00R12

    Test Method for:Effects of Heat Aging on Weight Loss, Cracking, and Chalking of Elastomeric Sealants After Cure
  • ASTM C1247-14

    Test Method for:Durability of Sealants Exposed to Continuous Immersion in Liquids
  • ASTM C1248-08R12

    Test Method for:Staining of Porous Substrate by Joint Sealants
  • ASTM C1249-06AR10

    Guide for:Secondary Seal for Sealed Insulating Glass Units for Structural Sealant Glazing Applications
  • ASTM C1253-14

    Test Method for:Determining the Outgassing Potential of Sealant Backing
  • ASTM C1257-15

    Test Method for:Accelerated Weathering of Solvent-Release-Type Sealants
  • ASTM C1265-94R11

    Test Method for:Determining the Tensile Properties of an Insulating Glass Edge Seal for Structural Glazing Applications
  • ASTM C1266-02R11

    Test Method for:Flow Characteristics of Preformed Tape Sealants
  • ASTM C1281-14

    Specification for:Preformed Tape Sealants for Glazing Applications
  • ASTM C1294-15

    Test Method for:Compatibility of Insulating Glass Edge Sealants with Liquid-Applied Glazing Materials
  • ASTM C1311-14

    Specification for:Solvent Release Sealants
  • ASTM C1330-02R13

    Specification for:Cylindrical Sealant Backing for Use with Cold Liquid-Applied Sealants
  • ASTM C1352_C1352M-15

    Test Method for:Flexural Modulus of Elasticity of Dimension Stone
  • ASTM C1353_C1353M-15A

    Test Method for:Abrasion Resistance of Dimension Stone Subjected to Foot Traffic Using a Rotary Platform Abraser
  • ASTM C1354_C1354M-15

    Test Method for:Strength of Individual Stone Anchorages in Dimension Stone
  • ASTM C1367-06R12

    Test Method for:Dead Load Resistance of a Sealant in Elevated Temperatures
  • ASTM C1369-07R14

    Specification for:Secondary Edge Sealants for Structurally Glazed Insulating Glass Units
  • ASTM C1375-00R14

    Guide for:Substrates Used in Testing Building Seals and Sealants
  • ASTM C1382-11

    Test Method for:Determining Tensile Adhesion Properties of Sealants When Used in Exterior Insulation and Finish Systems (EIFS) Joints
  • ASTM C1392-00R14

    Guide for:Evaluating Failure of Structural Sealant Glazing
  • ASTM C1394-03R12

    Guide for:In-Situ Structural Silicone Glazing Evaluation
  • ASTM C1401-14

    Guide for:Structural Sealant Glazing
  • ASTM C1442-14

    Practice for:Conducting Tests on Sealants Using Artificial Weathering Apparatus
  • ASTM C1472-10

    Guide for:Calculating Movement and Other Effects When Establishing Sealant Joint Width
  • ASTM C1481-12

    Guide for:Use of Joint Sealants with Exterior Insulation and Finish Systems (EIFS)
  • ASTM C1487-02R12

    Guide for:Remedying Structural Silicone Glazing
  • ASTM C1496-11

    Guide for:Assessment and Maintenance of Exterior Dimension Stone Masonry Walls and Facades
  • ASTM C1501-14

    Test Method for:Color Stability of Building Construction Sealants as Determined by Laboratory Accelerated Weathering Procedures
  • ASTM C1515-14

    Guide for:Cleaning of Exterior Dimension Stone, Vertical And Horizontal Surfaces, New or Existing
  • ASTM C1518-04R14

    Specification for:Precured Elastomeric Silicone Joint Sealants
  • ASTM C1519-10

    Test Method for:Evaluating Durability of Building Construction Sealants by Laboratory Accelerated Weathering Procedures
  • ASTM C1520-02R15E01

    Guide for:Paintability of Latex Sealants
  • ASTM C1521-13

    Practice for:Evaluating Adhesion of Installed Weatherproofing Sealant Joints
  • ASTM C1523-10

    Test Method for:Determining Modulus, Tear and Adhesion Properties of Precured Elastomeric Joint Sealants
  • ASTM C1526-08R14

    Specification for:Serpentine Dimension Stone
  • ASTM C1527_C1527M-11

    Specification for:Travertine Dimension Stone
  • ASTM C1528-15

    Guide for:Selection of Dimension Stone
  • ASTM C1536-10

    Test Method for:Measuring the Yield for Aerosol Foam Sealants
  • ASTM C1564-15

    Guide for:Use of Silicone Sealants for Protective Glazing Systems
  • ASTM C1589_C1589M-14

    Practice for:Outdoor Weathering of Construction Seals and Sealants
  • ASTM C1620-12

    Specification for:Aerosol Polyurethane and Aerosol Latex Foam Sealants
  • ASTM C1635-14

    Test Method to:Evaluate Adhesion/Cohesion Properties of a Sealant at Fixed Extension
  • ASTM C1642-14

    Practice for:Determining Air Leakage Rates of Aerosol Foam Sealants and Other Construction Joint Fill and Insulation Materials
  • ASTM C1643-14

    Test Method to:Measuring the Post Dispensing Volumetric Expansion of Aerosol Foam Sealants
  • ASTM C1681-14

    Test Method for:Evaluating the Tear Resistance of a Sealant Under Constant Strain
  • ASTM C1721-15

    Guide for:Petrographic Examination of Dimension Stone
  • ASTM C1722-11

    Guide for:Repair and Restoration of Dimension Stone
  • ASTM C1735-11

    Test Method for:Measuring the Time Dependent Modulus of Sealants Using Stress Relaxation
  • ASTM C1736-11

    Practice for:Non-Destructive Evaluation of Adhesion of Installed Weatherproofing Sealant Joints Using a Rolling Device
  • ASTM C1737-10

    Guide for:Evaluating Temperature Effects to Aerosol Foam Sealant During and After Dispensing
  • ASTM C1756-14

    Guide for:Comparing Sealant Behavior to Reference Photographs
  • ASTM C1799_C1799M-14

    Guide to:Dimension Stone Test Specimen Sampling and Preparation
  • ASTM C1806-14

    Test Method for:Measuring the Flow Rate of Aerosol Foam Sealants
  • ASTM D2202-00R14

    Test Method for:Slump of Sealants
  • ASTM D2203-01R11

    Test Method for:Staining from Sealants
  • ASTM D2377-14

    Test Method for:Tack-Free Time of Caulking Compounds and Sealants
  • ASTM D2452-15

    Test Method for:Extrudability of Oil- and Resin-Base Caulking Compounds
  • ASTM D2453-15

    Test Method for:Shrinkage and Tenacity of Oil- and Resin-Base Caulking Compounds
  • ASTM D2859-15

    Test Method for:Ignition Characteristics of Finished Textile Floor Covering Materials
  • ASTM E0084-15B

    Test Method for:Surface Burning Characteristics of Building Materials
  • ASTM E0108-11

    Test Methods for:Fire Tests of Roof Coverings
  • ASTM E0119-15

    Test Methods for:Fire Tests of Building Construction and Materials
  • ASTM E0136-16

    Test Method for:Behavior of Materials in a Vertical Tube Furnace at 750°C
  • ASTM E0162-15B

    Test Method for:Surface Flammability of Materials Using a Radiant Heat Energy Source
  • ASTM E0176-15AE01

    Terminology of:Fire Standards
  • ASTM E0535-14

    Practice for:Preparation of Fire-Test-Response Standards
  • ASTM E0603-13

    Guide for:Room Fire Experiments
  • ASTM E0648-15E01

    Test Method for:Critical Radiant Flux of Floor-Covering Systems Using a Radiant Heat Energy Source
  • ASTM E0662-15A

    Test Method for:Specific Optical Density of Smoke Generated by Solid Materials
  • ASTM E0800-14

    Guide for:Measurement of Gases Present or Generated During Fires
  • ASTM E0814-13A

    Test Method for:Fire Tests of Penetration Firestop Systems
  • ASTM E0906_E0906M-14

    Test Method for:Heat and Visible Smoke Release Rates for Materials and Products Using a Thermopile Method
  • ASTM E0970-14

    Test Method for:Critical Radiant Flux of Exposed Attic Floor Insulation Using a Radiant Heat Energy Source
  • ASTM E1317-12

    Test Method for:Flammability of Marine Surface Finishes
  • ASTM E1321-13

    Test Method for:Determining Material Ignition and Flame Spread Properties
  • ASTM E1352-08A

    Test Method for:Cigarette Ignition Resistance of Mock-Up Upholstered Furniture Assemblies
  • ASTM E1353-08AE01

    Test Methods for:Cigarette Ignition Resistance of Components of Upholstered Furniture
  • ASTM E1354-15A

    Test Method for:Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter
  • ASTM E1355-12

    Guide for:Evaluating the Predictive Capability of Deterministic Fire Models
  • ASTM E1474-14

    Test Method for:Determining the Heat Release Rate of Upholstered Furniture and Mattress Components or Composites Using a Bench Scale Oxygen Consumption Calorimeter
  • ASTM E1529-14A

    Test Methods for:Determining Effects of Large Hydrocarbon Pool Fires on Structural Members and Assemblies
  • ASTM E1537-15

    Test Method for:Fire Testing of Upholstered Furniture
  • ASTM E1546-15

    Guide for:Development of Fire-Hazard-Assessment Standards
  • ASTM E1590-13

    Test Method for:Fire Testing of Mattresses
  • ASTM E1591-13

    Guide for:Obtaining Data for Fire Growth Models
  • ASTM E1623-14

    Test Method for:Determination of Fire and Thermal Parameters of Materials, Products, and Systems Using an Intermediate Scale Calorimeter (ICAL)
  • ASTM E1678-15

    Test Method for:Measuring Smoke Toxicity for Use in Fire Hazard Analysis
  • ASTM E1725-14

    Test Methods for:Fire Tests of Fire-Resistive Barrier Systems for Electrical System Components
  • ASTM E1740-15

    Test Method for:Determining the Heat Release Rate and Other Fire-Test-Response Characteristics of Wall Covering or Ceiling Covering Composites Using a Cone Calorimeter
  • ASTM E1776-13

    Guide for:Development of Fire-Risk-Assessment Standards
  • ASTM E1822-13

    Test Method for:Fire Testing of Stacked Chairs
  • ASTM E1966-15

    Test Method for:Fire-Resistive Joint Systems
  • ASTM E1995-12

    Test Method for:Measurement of Smoke Obscuration Using a Conical Radiant Source in a Single Closed Chamber, With the Test Specimen Oriented Horizontally
  • ASTM E2032-09R13

    Guide for:Extension of Data From Fire Resistance Tests Conducted in Accordance with ASTM E 119
  • ASTM E2058-13A

    Test Methods for:Measurement of Material Flammability Using a Fire Propagation Apparatus (FPA)
  • ASTM E2061-15

    Guide for:Fire Hazard Assessment of Rail Transportation Vehicles
  • ASTM E2067-15

    Practice for:Full-Scale Oxygen Consumption Calorimetry Fire Tests
  • ASTM E2102-15

    Test Method for:Measurement of Mass Loss and Ignitability for Screening Purposes Using a Conical Radiant Heater
  • ASTM E2187-09

    Test Method for:Measuring the Ignition Strength of Cigarettes
  • ASTM E2203-14

    Specification for:Dense Thermoplastic Elastomers Used for Compression Seals, Gaskets, Setting Blocks, Spacers and Accessories
  • ASTM E2226-15B

    Practice for:Application of Hose Stream
  • ASTM E2231-15

    Practice for:Specimen Preparation and Mounting of Pipe and Duct Insulation Materials to Assess Surface Burning Characteristics
  • ASTM E2257-13A

    Test Method for:Room Fire Test of Wall and Ceiling Materials and Assemblies
  • ASTM E2280-13

    Guide for:Fire Hazard Assessment of the Effect of Upholstered Seating Furniture Within Patient Rooms of Health Care Facilities
  • ASTM E2307-15B

    Test Method for:Determining Fire Resistance of Perimeter Fire Barriers Using Intermediate-Scale, Multi-story Test Apparatus
  • ASTM E2335-12

    Guide for:Laboratory Monitors
  • ASTM E2336-14

    Test Methods for:Fire Resistive Grease Duct Enclosure Systems
  • ASTM E2404-15A

    Practice for:Specimen Preparation and Mounting of Textile, Paper or Polymeric (Including Vinyl) and Wood Wall or Ceiling Coverings, Facings and Veneers, to Assess Surface Burning Characteristics
  • ASTM E2536-15A

    Guide for:Assessment of Measurement Uncertainty in Fire Tests
  • ASTM E2573-12

    Practice for:Specimen Preparation and Mounting of Site-Fabricated Stretch Systems to Assess Surface Burning Characteristics
  • ASTM E2574_E2574M-12A

    Test Method for:Fire Testing of School Bus Seat Assemblies
  • ASTM E2579-15

    Practice for:Specimen Preparation and Mounting of Wood Products to Assess Surface Burning Characteristics
  • ASTM E2599-15

    Practice for:Specimen Preparation and Mounting of Reflective Insulation, Radiant Barrier and Vinyl Stretch Ceiling Materials for Building Applications to Assess Surface Burning Characteristics
  • ASTM E2632_E2632M-13E01

    Test Method for:Evaluating the Under-Deck Fire Test Response of Deck Materials
  • ASTM E2652-16

    Test Method for:Behavior of Materials in a Tube Furnace with a Cone-shaped Airflow Stabilizer, at 750°C
  • ASTM E2653-15

    Practice for:Conducting an Interlaboratory Study to Determine Precision Estimates for a Fire Test Method with Fewer Than Six Participating Laboratories
  • ASTM E2688-10

    Practice for:Specimen Preparation and Mounting of Tapes to Assess Surface Burning Characteristics
  • ASTM E2690-10E02

    Practice for:Specimen Preparation and Mounting of Caulks and Sealants to Assess Surface Burning Characteristics
  • ASTM E2707-15

    Test Method for:Determining Fire Penetration of Exterior Wall Assemblies Using a Direct Flame Impingement Exposure
  • ASTM E2726_E2726M-12A

    Test Method for:Evaluating the Fire-Test-Response of Deck Structures to Burning Brands
  • ASTM E2748-12A

    Guide for:Fire-Resistance Experiments
  • ASTM E2749-15A

    Practice for:Measuring the Uniformity of Furnace Exposure on Test Specimens
  • ASTM E2750-13E01

    Guide for:Extension of Data from Penetration Firestop System Tests Conducted in Accordance with ASTM
  • ASTM E2768-11

    Test Method for:Extended Duration Surface Burning Characteristics of Building Materials (30 min Tunnel Test)
  • ASTM E2816-15A

    Test Methods for:Fire Resistive Metallic HVAC Duct Systems
  • ASTM E2837-13

    Test Method for:Determining the Fire Resistance of Continuity Head-of-Wall Joint Systems Installed Between Rated Wall Assemblies and Nonrated Horizontal Assemblies
  • ASTM E2886_E2886M-14

    Test Method for:Evaluating the Ability of Exterior Vents to Resist the Entry of Embers and Direct Flame Impingement
  • ASTM E2912-13

    Test Method for:Fire Test of Non-Mechanical Fire Dampers Used in Vented Construction
  • ASTM E2957-15

    Test Method for:Resistance to Wildfire Penetration of Eaves, Soffits and Other Projections
  • ASTM E2965-15

    Test Method for:Determination of Low Levels Heat Release Rate for Materials and Products Using an Oxygen Consumption Calorimeter
  • ASTM E2988-15A

    Practice for:Specimen Preparation and Mounting of Flexible Fibrous Glass Insulation for Metal Buildings to Assess Surface Burning Characteristics
  • ASTM E2989-15A

    Guide for:Assessment of Continued Applicability of Fire Test Reports Used in Building Regulation
  • ASTM E3020-15

    Practice for:Ignition Sources
  • ASTM E3021_E3021M-15

    Guide for:Evaluating the Relative Effectiveness of Building Systems to Resist the Passage of Products of Combustion Based on the Aggregation of Leakage Rates