한국표준정보망(KSSN)

ASTM Annual Book 수록 리스트

핸드북  >  ASTM

    04.09 : 토양, 석재 (Ⅱ):D5877-끝

  • ASTM D5877

    Guide for:Displaying Results of Chemical Analyses of Groundwater for Major Ions and Trace Elements—Diagrams Based on Data Analytical Calculations
  • ASTM D5878-08

    Guides for:Using Rock-Mass Classification Systems for Engineering Purposes
  • ASTM D5879-95R10

    Practice for:Surface Site Characterization for On-Site Septic Systems
  • ASTM D5880

    Guide for:Subsurface Flow and Transport Modeling
  • ASTM D5881-13

    Test Method for:(Analytical Procedure) Determining Transmissivity of Confined Nonleaky Aquifers by Critically Damped Well Response to Instantaneous Change in Head (Slug)
  • ASTM D5882-07R13

    Test Method for:Low Strain Impact Integrity Testing of Deep Foundations
  • ASTM D5883-12

    Guide for:Use of Rotary Kiln Produced Expanded Shale, Clay or Slate (ESCS) as a Mineral Amendment in Topsoil Used for Landscaping and Related Purposes
  • ASTM D5903-96R12

    Guide for:Planning and Preparing for a Groundwater Sampling Event
  • ASTM D5911_D5911M-96R10E01

    Practice for:Minimum Set of Data Elements to Identify a Soil Sampling Site
  • ASTM D5912

    Test Method for:(Analytical Procedure) Determining Hydraulic Conductivity of an Unconfined Aquifer by Overdamped Well Response to Instantaneous Change in Head (Slug)
  • ASTM D5918-13

    Test Methods for:Frost Heave and Thaw Weakening Susceptibility of Soils
  • ASTM D5920-14

    Test Method (Analytical Procedure) for:Tests of Anisotropic Unconfined Aquifers by Neuman Method
  • ASTM D5921-96R10

    Practice for:Subsurface Site Characterization of Test Pits for On-Site Septic Systems
  • ASTM D5922-96R10

    Guide for:Analysis of Spatial Variation in Geostatistical Site Investigations
  • ASTM D5923-96R10

    Guide for:Selection of Kriging Methods in Geostatistical Site Investigations
  • ASTM D5924-96R10

    Guide for:Selection of Simulation Approaches in Geostatistical Site Investigations
  • ASTM D5971_D5971M-13

    Practice for:Sampling Freshly Mixed Controlled Low-Strength Material
  • ASTM D5978-96R11E01

    Guide for:Maintenance and Rehabilitation of Groundwater Monitoring Wells
  • ASTM D5979-96R14

    Guide for:Conceptualization and Characterization of Groundwater Systems
  • ASTM D5980-96R10E01

    Guide for:Selection and Documentation of Existing Wells for Use in Environmental Site Characterization and Monitoring
  • ASTM D5981-96R08

    Guide for:Calibrating a Groundwater Flow Model Application
  • ASTM D5982-15

    Test Method for:Determining Cement Content of Fresh Soil-Cement (Heat of Neutralization Method)
  • ASTM D5995-98R10

    Guide for:Environmental Site Characterization in Cold Regions
  • ASTM D6000_D6000M-15E01

    Guide for:Presentation of Water-Level Information from Groundwater Sites
  • ASTM D6001-05R12

    Guide for:Direct-Push Groundwater Sampling for Environmental Site Characterization
  • ASTM D6023-15

    Test Method for:Density (Unit Weight), Yield, Cement Content, and Air Content (Gravimetric) of Controlled Low-Strength Material (CLSM)
  • ASTM D6024_D6024M-15

    Test Method for:Ball Drop on Controlled Low Strength Material (CLSM) to Determine Suitability for Load Application
  • ASTM D6025-96R08

    Guide for:Developing and Evaluating Groundwater Modeling Codes
  • ASTM D6026-13

    Practice for:Using Significant Digits in Geotechnical Data
  • ASTM D6027_D6027M-15

    Practice for:Calibrating Linear Displacement Transducers for Geotechnical Purposes
  • ASTM D6028-96R10E01

    Test Method (Analytical Procedure) for:Determining Hydraulic Properties of a Confined Aquifer Taking into Consideration Storage of Water in Leaky Confining Beds by Modified Hantush Method
  • ASTM D6029-96R10E01

    Test Method (Analytical Procedure) for:Determining Hydraulic Properties of a Confined Aquifer and a Leaky Confining Bed with Negligible Storage by the Hantush-Jacob Method
  • ASTM D6030-15

    Guide for:Selection of Methods for Assessing Groundwater or Aquifer Sensitivity and Vulnerability
  • ASTM D6031_D6031M-96R15

    Test Method for:Logging In Situ Moisture Content and Density of Soil and Rock by the Nuclear Method in Horizontal, Slanted, and Vertical Access Tubes
  • ASTM D6032-08

    Test Method for:Determining Rock Quality Designation (RQD) of Rock Core
  • ASTM D6033-96R08

    Guide for:Describing the Functionality of a Groundwater Modeling Code
  • ASTM D6034-96R10E01

    Test Method (Analytical Procedure) for:Determining the Efficiency of a Production Well in a Confined Aquifer from a Constant Rate Pumping Test
  • ASTM D6035_D6035M-13

    Test Method for:Determining the Effect of Freeze-Thaw on Hydraulic Conductivity of Compacted or Intact Soil Specimens Using a Flexible Wall Permeameter
  • ASTM D6036-96R14

    Guide for:Displaying the Results of Chemical Analyses of Groundwater for Major Ions and Trace Elements—Use of Maps
  • ASTM D6066-11

    Practice for:Determining the Normalized Penetration Resistance of Sands for Evaluation of Liquefaction Potential
  • ASTM D6067-10

    Practice for:Using the Electronic Piezocone Penetrometer Tests for Environmental Site Characterization
  • ASTM D6089-15

    Guide for:Documenting a Groundwater Sampling Event
  • ASTM D6092-14

    Practice for:Specifying Standard Sizes of Stone for Erosion Control
  • ASTM D6103

    Test Method for:Flow Consistency of Controlled Low Strength Material (CLSM)
  • ASTM D6106-97R10

    Guide for:Establishing Nomenclature of Groundwater Aquifers
  • ASTM D6128-14

    Test Method for:Shear Testing of Bulk Solids Using the Jenike Shear Cell
  • ASTM D6151_D6151M-15

    Practice for:Using Hollow-Stem Augers for Geotechnical Exploration and Soil Sampling
  • ASTM D6167-11

    Guide for:Conducting Borehole Geophysical Logging: Mechanical Caliper
  • ASTM D6168-97R10

    Guide for:Selection of Minimum Set of Data Elements Required to Identify Locations Chosen for Field Collection of Information to Describe Soil, Rock, and Their Contained Fluids
  • ASTM D6169_D6169M-13

    Guide for:Selection of Soil and Rock Sampling Devices Used With Drill Rigs for Environmental Investigations
  • ASTM D6170-97R10

    Guide for:Selecting a Groundwater Modeling Code
  • ASTM D6171-97R10

    Guide for:Documenting a Groundwater Modeling Code
  • ASTM D6187-97R10

    Practice for:Cone Penetrometer Technology Characterization of Petroleum Contaminated Sites with Nitrogen Laser-Induced Fluorescence
  • ASTM D6230-13

    Test Method for:Monitoring Ground Movement Using Probe-Type Inclinometers
  • ASTM D6235-04R10

    Practice for:Expedited Site Characterization of Vadose Zone and Groundwater Contamination at Hazardous Waste Contaminated Sites
  • ASTM D6236-11

    Guide for:Coring and Logging Soil-Cement or Lime-Stabilized Soil
  • ASTM D6274-10

    Guide for:Conducting Borehole Geophysical Logging - Gamma
  • ASTM D6276

    Test Method for:Using pH to Estimate the Soil-Lime Proportion Requirement for Soil Stabilization
  • ASTM D6282_D6282M-14

    Guide for:Direct Push Soil Sampling for Environmental Site Characterizations
  • ASTM D6285-99R12E01

    Guide for:Locating Abandoned Wells
  • ASTM D6286-12

    Guide for:Selection of Drilling Methods for Environmental Site Characterization
  • ASTM D6312-98R12E01

    Guide for:Developing Appropriate Statistical Approaches for Groundwater Detection Monitoring Programs
  • ASTM D6391-11

    Test Method for:Field Measurement of Hydraulic Conductivity Using Borehole Infiltration
  • ASTM D6393-14

    Test Method for:Bulk Solids Characterization by Carr Indices
  • ASTM D6429-99R11E01

    Guide for:Selecting Surface Geophysical Methods
  • ASTM D6430-99R10

    Guide for:Using the Gravity Method for Subsurface Investigation
  • ASTM D6431-99R10

    Guide for:Using the Direct Current Resistivity Method for Subsurface Investigation
  • ASTM D6432-11

    Guide for:Using the Surface Ground Penetrating Radar Method for Subsurface Investigation
  • ASTM D6449-99R15

    Test Method for:Flow of Fine Aggregate Concrete for Fabric Formed Concrete (Flow Cone Method)
  • ASTM D6452-99R12E01

    Guide for:Purging Methods for Wells Used for Groundwater Quality Investigations
  • ASTM D6459-15

    Test Method for:Determination of Rolled Erosion Control Product (RECP) Performance in Protecting Hillslopes from Rainfall-Induced Erosion
  • ASTM D6460-12

    Test Method for:Determination of Rolled Erosion Control Product (RECP) Performance in Protecting Earthen Channels from Stormwater-Induced Erosion
  • ASTM D6461-99R07E02

    Specification for:Silt Fence Materials
  • ASTM D6462-03R08

    Practice for:Silt Fence Installation
  • ASTM D6467-13

    Test Method for:Torsional Ring Shear Test to Determine Drained Residual Shear Strength of Cohesive Soils
  • ASTM D6473-15

    Test Method For:Specific Gravity And Absorption of Rock For Erosion Control
  • ASTM D6475

    Test Method for:Measuring Mass Per Unit Area of Erosion Control Blankets
  • ASTM D6517-00R12E01

    Guide for:Field Preservation of Groundwater Samples
  • ASTM D6519-15

    Practice for:Sampling of Soil Using the Hydraulically Operated Stationary Piston Sampler
  • ASTM D6527-00R08

    Test Method for:Determining Unsaturated and Saturated Hydraulic Conductivity in Porous Media by Steady-State Centrifugation
  • ASTM D6528

    Test Method for:Consolidated Undrained Direct Simple Shear Testing of Cohesive Soils
  • ASTM D6539-13

    Test Method for:Measurement of the Permeability of Unsaturated Porous Materials by Flowing Air
  • ASTM D6564-00R12E01

    Guide for:Field Filtration of Groundwater Samples
  • ASTM D6565

    Test Method for:Determination of Water (Moisture) Content of Soil by the Time-Domain Reflectometry (TDR) Method
  • ASTM D6572-13E01

    Test Methods for:Determining Dispersive Characteristics of Clayey Soils by the Crumb Test
  • ASTM D6598-11

    Guide for:Installing and Operating Settlement Platforms for Monitoring Vertical Deformations
  • ASTM D6599-00R14E01

    Practice for:Construction of Live Fascines on Slopes
  • ASTM D6629-01R12E01

    Guide for:Selection of Methods for Estimating Soil Loss by Erosion
  • ASTM D6634_D6634M-14

    Guide for:Selection of Purging and Sampling Devices for Groundwater Monitoring Wells
  • ASTM D6635-15

    Test Method for:Performing the Flat Plate Dilatometer
  • ASTM D6639-01R08

    Guide for:Using the Frequency Domain Electromagnetic Method for Subsurface Investigations
  • ASTM D6642

    Guide for:Comparison of Techniques to Quantify the Soil-Water (Moisture) Flux
  • ASTM D6682-08

    Test Method for:Measuring Shear Stresses of Powders Using Peschl Rotational Split Level Shear Tester
  • ASTM D6683-14

    Test Method for:Measuring Bulk Density Values of Powders and Other Bulk Solids as Function of Compressive Stress
  • ASTM D6684-04R10

    Specification for:Materials and Manufacture of Articulating Concrete Block (ACB) Revetment Systems
  • ASTM D6685-01R15

    Guide for the:Selection of Test Methods for Fabrics Used for Fabric Formed Concrete (FFC)
  • ASTM D6711-15

    Practice for:Specifying Rock to Fill Gabions, Revet Mattresses, and Gabion Mattresses
  • ASTM D6724-04R10

    Guide for:Installation of Direct Push Groundwater Monitoring Wells
  • ASTM D6725-04R10

    Practice for:Direct Push Installation of Prepacked Screen Monitoring Wells in Unconsolidated Aquifers
  • ASTM D6726-15

    Guide for:Conducting Borehole Geophysical Logging—Electromagnetic Induction
  • ASTM D6727_D6727M-16

    Guide for:Conducting Borehole Geophysical Logging—Neutron
  • ASTM D6758-08

    Test Method for:Measuring Stiffness and Apparent Modulus of Soil and Soil-Aggregate In-Place by Electro-Mechanical Method
  • ASTM D6760-14

    Test Method for:Integrity Testing of Concrete Deep Foundations by Ultrasonic Crosshole Testing
  • ASTM D6765-13

    Practice for:Live Staking
  • ASTM D6773-08

    Test Method for:Bulk Solids Using Schulze Ring Shear Tester
  • ASTM D6780_D6780M-12

    Test Method for:Water Content and Density of Soil In situ by Time Domain Reflectometry (TDR)
  • ASTM D6820

    Guide for:Use of the Time Domain Electromagnetic Method for Subsurface Investigation
  • ASTM D6825-14

    Guide for:Placement of Riprap Revetments
  • ASTM D6836-02R08E02

    Test Methods for:Determination of the Soil Water Characteristic Curve for Desorption Using Hanging Column, Pressure Extractor, Chilled Mirror Hygrometer, or Centrifuge
  • ASTM D6884-03R15E01

    Practice for:Installation of Articulating Concrete Block (ACB) Revetment Systems
  • ASTM D6910_D6910M-09

    Test Method for:Marsh Funnel Viscosity of Clay Construction Slurries
  • ASTM D6911-15

    Guide for:Packaging and Shipping Environmental Samples for Laboratory Analysis
  • ASTM D6913-04R09E01

    Test Methods for:Particle-Size Distribution (Gradation) of Soils Using Sieve Analysis
  • ASTM D6914-04R10

    Practice for:Sonic Drilling for Site Characterization and the Installation of Subsurface Monitoring Devices
  • ASTM D6938-15

    Test Methods for:In-Place Density and Water Content of Soil and Soil-Aggregate by Nuclear Methods (Shallow Depth)
  • ASTM D6940-10

    Practice for:Measuring Sifting Segregation Tendencies of Bulk Solids
  • ASTM D6941-12

    Practice for:Measuring Fluidization Segregation Tendencies of Powders
  • ASTM D7012-14

    Test Methods for:Compressive Strength and Elastic Moduli of Intact Rock Core Specimens under Varying States of Stress and Temperatures
  • ASTM D7013_D7013M-15

    Guide for:Calibration Facility Setup for Nuclear Surface Gauges
  • ASTM D7014-10

    Practice for:Assembly and Placement of Double-Twisted Wire Mesh Gabions and Revet Mattresses
  • ASTM D7015-13

    Practices for:Obtaining Intact Block (Cubical and Cylindrical) Samples of Soils
  • ASTM D7045-04R10

    Guide for:Optimization of Groundwater Monitoring Constituents for Detection Monitoring Programs for RCRA Waste Disposal Facilities
  • ASTM D7046-11

    Guide for:Use of the Metal Detection Method for Subsurface Exploration
  • ASTM D7047-15E01

    Test Method for:Swell Volume of Plantago Insularis (Ovata, Psyllium)
  • ASTM D7048-04R10

    Guide for:Applying Statistical Methods for Assessment and Corrective Action Environmental Monitoring Programs
  • ASTM D7069-04R15

    Guide for:Field Quality Assurance in a Groundwater Sampling Event
  • ASTM D7070-08

    Test Methods for:Creep of Rock Core Under Constant Stress and Temperature
  • ASTM D7099-04R10

    Terminology Relating to:Frozen Soil and Rock
  • ASTM D7100-11

    Test Method for:Hydraulic Conductivity Compatibility Testing of Soils with Aqueous Solutions
  • ASTM D7101-13

    Index Test Method for:Determination of Unvegetated Rolled Erosion Control Product (RECP) Ability to Protect Soil from Rain Splash and Associated Runoff Under Bench-Scale Conditions
  • ASTM D7128-05R10

    Guide for:Using the Seismic-Reflection Method for Shallow Subsurface Investigation
  • ASTM D7181-11

    Test Method for:Consolidated Drained Triaxial Compression Test for Soils
  • ASTM D7207

    Test Method for:Determination of Unvegetated Rolled Erosion Control Product (RECP) Ability to Protect Sand from Hydraulically-Induced Shear Stresses under Bench-Scale Conditions
  • ASTM D7208-14

    Test Method for:Determination of Temporary Ditch Check Performance in Protecting Earthen Channels from Stormwater-Induced Erosion
  • ASTM D7242_D7242M-06R13E01

    Practice for:Field Pneumatic Slug (Instantaneous Change in Head) Tests to Determine Hydraulic Properties of Aquifers with Direct Push Groundwater Samplers
  • ASTM D7243-11

    Guide for:Measuring the Saturated Hydraulic Conductivity of Paper Industry Sludges
  • ASTM D7262-10

    Test Method for:Estimating the Permanganate Natural Oxidant Demand of Soil and Aquifer Solids
  • ASTM D7263-09

    Test Methods for:Laboratory Determination of Density (Unit Weight) of Soil Specimens
  • ASTM D7276-08

    Guide for:Analysis and Interpretation of Test Data for Articulating Concrete Block (ACB) Revetment Systems in Open Channel Flow
  • ASTM D7277-08

    Test Method for:Performance Testing of Articulating Concrete Block (ACB) Revetment Systems for Hydraulic Stability in Open Channel Flow
  • ASTM D7299-12

    Practice for:Verifying Performance of a Vertical Inclinometer Probe
  • ASTM D7300-11

    Test Method for:Laboratory Determination of Strength Properties of Frozen Soil at a Constant Rate of Strain
  • ASTM D7322-13A

    Test Method for:Determination of Rolled Erosion Control Product (RECP) Ability to Encourage Seed Germination and Plant Growth Under Bench-Scale Conditions
  • ASTM D7351-13

    Test Method for:Determination of Sediment Retention Device Effectiveness in Sheet Flow Applications
  • ASTM D7352-07R12

    Practice for:Direct Push Technology for Volatile Contaminant Logging with the Membrane Interface Probe (MIP)
  • ASTM D7367-14

    Test Method for:Determining Water Holding Capacity of Fiber Mulches for Hydraulic Planting
  • ASTM D7380-15

    Test Method for:Soil Compaction Determination at Shallow Depths Using 5-lb (2.3 kg) Dynamic Cone Penetrometer
  • ASTM D7382-08

    Test Methods for:Determination of Maximum Dry Unit Weight and Water Content Range for Effective Compaction of Granular Soils Using a Vibrating Hammer
  • ASTM D7383-10

    Test Methods for:Axial Compressive Force Pulse (Rapid) Testing of Deep Foundations
  • ASTM D7384

    Practice for:Minimum Geospatial Data for a Surface Coal Mining Boundary
  • ASTM D7400-14

    Test Methods for:Downhole Seismic Testing
  • ASTM D7401-08

    Test Methods for:Laboratory Determination of Rock Anchor Capacities by Pull and Drop Tests
  • ASTM D7443

    Practice for:Minimum Geospatial Data for Underground Coal Mining Extents
  • ASTM D7458-14

    Test Method for:Determination of Beryllium in Soil, Rock, Sediment, and Fly Ash Using Ammonium Bifluoride Extraction and Fluorescence Detection
  • ASTM D7481-09

    Test Methods for:Determining Loose and Tapped Bulk Densities of Powders using a Graduated Cylinder
  • ASTM D7503-10

    Test Method for:Measuring the Exchange Complex and Cation Exchange Capacity of Inorganic Fine-Grained Soils
  • ASTM D7533_D7533M

    Practice for:Minimum Geospatial Data for Abandoned Mine Land Problem Area
  • ASTM D7534_D7534M

    Practice for:Minimum Geospatial Data for Abandoned Mine Land Planning Unit
  • ASTM D7608-10

    Test Method for:Torsional Ring Shear Test to Determine Drained Fully Softened Shear Strength and Nonlinear Strength Envelope of Cohesive Soils (Using Normally Consolidated Specimen) for Slopes with No Preexisting Shear Surfaces
  • ASTM D7609_D7609M

    Practice for:Minimum Geospatial Data for an Abandoned Mine Land Project Site
  • ASTM D7610_D7610M

    Practice for:Minimum Geospatial Data for Abandoned Mine Land Keyword Feature
  • ASTM D7625-10

    Test Method for:Laboratory Determination of Abrasiveness of Rock Using the CERCHAR Method
  • ASTM D7626-10

    Test Methods for:Determining the Organic Treat Loading of Organophilic Clay
  • ASTM D7627

    Practice for:Minimum Geospatial Data for Land Reclamation and Performance Bond Status of a Permitted Coal Mine
  • ASTM D7628

    Practice for:Minimum Geospatial Data for Lands Unsuitable for Mining Petitions and Designated Areas
  • ASTM D7629_D7629M

    Practice for:Minimum Geospatial Data for Representing Coal Spoil and Refuse Features
  • ASTM D7630_D7630M

    Practice for:Minimum Geospatial Data for Postmining Land Uses
  • ASTM D7631

    Practice for:Minimum Geospatial Data for a Coal Mining Environmental Resource Monitoring Location
  • ASTM D7648-12

    Practice for:Active Soil Gas Sampling for Direct Push or Manual-Driven Hand-Sampling Equipment
  • ASTM D7663-12

    Practice for:Active Soil Gas Sampling in the Vadose Zone for Vapor Intrusion Evaluations
  • ASTM D7664-10

    Test Methods for:Measurement of Hydraulic Conductivity of Unsaturated Soils
  • ASTM D7698-11A

    Test Method for:In-Place Estimation of Density and Water Content of Soil and Aggregate by Correlation with Complex Impedance Method
  • ASTM D7699_D7699M-11

    Practice for:Minimum Geospatial Data for Abandoned Mine Land Problem Areas, Planning Units, Keyword Features, and Project Sites
  • ASTM D7743-12

    Test Method for:Measuring the Minimum Fluidization Velocities of Free Flowing Powders
  • ASTM D7758-11

    Practice for:Passive Soil Gas Sampling in the Vadose Zone for Source Identification, Spatial Variability Assessment, Monitoring, and Vapor Intrusion Evaluations
  • ASTM D7759_D7759M-14

    Guide for:Nuclear Surface Moisture and Density Gauge Calibration
  • ASTM D7760-12

    Test Method for:Measurement of Hydraulic Conductivity of Tire Derived Aggregates Using a Rigid Wall Permeameter
  • ASTM D7762-11

    Practice for:Design of Stabilization of Soil and Soil-Like Materials with Self-Cementing Fly Ash
  • ASTM D7764-12

    Practice for:Pre-Installation Acceptance Testing of Vibrating Wire Piezometers
  • ASTM D7765-12

    Practice for:Use of Foundry Sand in Structural Fill and Embankments
  • ASTM D7780-12

    Practice for:Geospatial Data for Representing Coal Mining Features
  • ASTM D7830_D7830M-14

    Test Method for:In-Place Density (Unit Weight) and Water Content of Soil Using an Electromagnetic Soil Density Gauge
  • ASTM D7891-15

    Test Method for:Shear Testing of Powders Using the Freeman Technology FT4 Powder Rheometer Shear Cell
  • ASTM D7929-14

    Guide for:Selection of Passive Techniques for Sampling Groundwater Monitoring Wells
  • ASTM D7949-14

    Test Methods for:Thermal Integrity Profiling of Concrete Deep Foundations
  • ASTM D7986-15

    Practice for:Preparing Specimens of Hydraulic Erosion Control Products for Index Property Testing