한국표준정보망(KSSN)

ASTM Annual Book 수록 리스트

핸드북  >  ASTM

    04.11 : 건축(Ⅰ):E72~E2110

  • ASTM E0072-15

    Test Methods of:Conducting Strength Tests of Panels for Building Construction
  • ASTM E0073-13

    Practice for:Static Load Testing of Truss Assemblies
  • ASTM E0154_E0154M-08AR13E01

    Test Methods for:Water Vapor Retarders Used in Contact with Earth Under Concrete Slabs, on Walls, or as Ground Cover
  • ASTM E0196-06R12

    Practice for:Gravity Load Testing of Floors and Low Slope Roofs
  • ASTM E0241-09R14E01

    Guide for:Limiting Water-Induced Damage to Buildings
  • ASTM E0283-04R12

    Test Method for:Determining Rate of Air Leakage Through Exterior Windows, Curtain Walls, and Doors Under Specified Pressure Differences Across the Specimen
  • ASTM E0330_E0330M-14

    Test Method for:Structural Performance of Exterior Windows, Doors, Skylights and Curtain Walls by Uniform Static Air Pressure Difference
  • ASTM E0331-00R09

    Test Method for:Water Penetration of Exterior Windows, Skylights, Doors, and Curtain Walls by Uniform Static Air Pressure Difference
  • ASTM E0405-04R12

    Test Methods for:Wear Testing Rotary Operators for Windows
  • ASTM E0455-11

    Test Method for:Static Load Testing of Framed Floor or Roof Diaphragm Constructions for Buildings
  • ASTM E0488_E0488M-15

    Test Methods for:Strength of Anchors in Concrete Elements
  • ASTM E0529-04R11

    Guide for:Conducting Flexural Tests on Beams and Girders for Building Construction
  • ASTM E0546-14

    Test Method for:Frost/Dew Point of Sealed Insulating Glass Units
  • ASTM E0547-00R09

    Test Method for:Water Penetration of Exterior Windows, Skylights, Doors, and Curtain Walls by Cyclic Static Air Pressure Difference
  • ASTM E0564-06R12

    Practice for:Static Load Test for Shear Resistance of Framed Walls for Buildings
  • ASTM E0575-05R11

    Practice for:Reporting Data from Structural Tests of Building Constructions, Elements, Connections, and Assemblies
  • ASTM E0576-14

    Test Method for:Frost/Dew Point of Sealed Insulating Glass Units in the Vertical Position
  • ASTM E0605_E0605M-93R15E01

    Test Methods for:Thickness and Density of Sprayed Fire-Resistive Material (SFRM) Applied to Structural Members
  • ASTM E0631-15

    Terminology of:Building Constructions
  • ASTM E0661-03R15E01

    Test Method for:Performance of Wood and Wood-Based Floor and Roof Sheathing Under Concentrated Static and Impact Loads
  • ASTM E0695-03R15E01

    Test Method of:Measuring Relative Resistance of Wall, Floor, and Roof Construction to Impact Loading
  • ASTM E0736_E0736M-00R15E01

    Test Method for:Cohesion/Adhesion of Sprayed Fire-Resistive Materials Applied to Structural Members
  • ASTM E0741-11

    Test Method for:Determining Air Change in a Single Zone by Means of a Tracer Gas Dilution
  • ASTM E0754-80R14E01

    Test Method for:Pullout Resistance of Ties and Anchors Embedded in Masonry Mortar Joints
  • ASTM E0759_E0759M-92R15E01

    Test Method for:Effect of Deflection on Sprayed Fire-Resistive Material Applied to Structural Members
  • ASTM E0760_E0760M-92R15E01

    Test Method for:Effect of Impact on Bonding of Sprayed Fire-Resistive Material Applied to Structural Members
  • ASTM E0761_E0761M-92R15E01

    Test Method for:Compressive Strength of Sprayed Fire-Resistive Material Applied to Structural Members
  • ASTM E0779-10

    Test Method for:Determining Air Leakage Rate by Fan Pressurization
  • ASTM E0783-02R10

    Test Method for:Field Measurement of Air Leakage Through Installed Exterior Windows and Doors
  • ASTM E0833-14

    Terminology of:Building Economics
  • ASTM E0859_E0859M-93R15E01

    Test Method for:Air Erosion of Sprayed Fire-Resistive Materials (SFRMs) Applied to Structural Members
  • ASTM E0864-12

    Practice for:Surface Preparation of Aluminum Alloys to Be Adhesively Bonded in Honeycomb Shelter Panels
  • ASTM E0865-12

    Specification for:Structural Film Adhesives for Honeycomb Sandwich Panels
  • ASTM E0866-11

    Specification for:Corrosion-Inhibiting Adhesive Primer for Aluminum Alloys to Be Adhesively Bonded in Honeycomb Shelter Panels
  • ASTM E0874-11

    Practice for:Adhesive Bonding of Aluminum Facings to Nonmetallic Honeycomb Core for Shelter Panels
  • ASTM E0894-88R10

    Test Method for:Anchorage of Permanent Metal Railing Systems and Rails for Buildings
  • ASTM E0917-15

    Practice for:Measuring Life-Cycle Costs of Buildings and Building Systems
  • ASTM E0935-13E01

    Test Methods for:Performance of Permanent Metal Railing Systems and Rails for Buildings
  • ASTM E0937_E0937M-93R15E01

    Test Method for:Corrosion of Steel by Sprayed Fire-Resistive Material (SFRM) Applied to Structural Members
  • ASTM E0964-15

    Practice for:Measuring Benefit-to-Cost and Savings-to-Investment Ratios for Buildings and Building Systems
  • ASTM E0985

    Specification for:Permanent Metal Railing Systems and Rails for Buildings
  • ASTM E0987-88R09

    Test Methods for:Deglazing Force of Fenestration Products
  • ASTM E0990-13

    Specification for:Core-Splice Adhesive for Honeycomb Sandwich Structural Panels
  • ASTM E0997-15

    Test Method for:Evaluating Glass Breakage Probability Under the Influence of Uniform Static Loads by Proof Load Testing
  • ASTM E0998-12

    Test Method for:Structural Performance of Glass in Windows, Curtain Walls, and Doors Under the Influence of Uniform Static Loads by Nondestructive Method
  • ASTM E1057-15

    Practice for:Measuring Internal Rate of Return and Adjusted Internal Rate of Return for Investments in Buildings and Building Systems
  • ASTM E1074-15

    Practice for:Measuring Net Benefits and Net Savings for Investments in Buildings and Building Systems
  • ASTM E1091-13

    Specification for:Nonmetallic Honeycomb Core for Use in Shelter Panels
  • ASTM E1105-15

    Test Method for:Field Determination of Water Penetration of Installed Exterior Windows, Skylights, Doors, and Curtain Walls, by Uniform or Cyclic Static Air Pressure Difference
  • ASTM E1121-15

    Practice for:Measuring Payback for Investments in Buildings and Building Systems
  • ASTM E1155-14

    Test Method for:Determining FF Floor Flatness and FL Floor Levelness Numbers
  • ASTM E1155M-14

    Test Method for:Determining FF Floor Flatness and FL Floor Levelness Numbers (Metric)
  • ASTM E1185-15

    Guide for:Selecting Economic Methods for Evaluating Investments in Buildings and Building Systems
  • ASTM E1186-03R09

    Practices for:Air Leakage Site Detection in Building Envelopes and Air Barrier Systems
  • ASTM E1190-11

    Test Methods for:Strength of Power-Actuated Fasteners Installed in Structural Members
  • ASTM E1233_E1233M-14

    Test Method for:Structural Performance of Exterior Windows, Doors, Skylights, and Curtain Walls by Cyclic Air Pressure Differential
  • ASTM E1258-88R12

    Test Method for:Airflow Calibration of Fan Pressurization Devices
  • ASTM E1300-12AE01

    Practice for:Determining Load Resistance of Glass in Buildings
  • ASTM E1307-10

    Practice for:Surface Preparation and Structural Adhesive Bonding of Precured, Nonmetallic Composite Facings to Structural Core for Flat Shelter Panels
  • ASTM E1334

    Practice for:Rating the Serviceability of a Building or Building-Related Facility
  • ASTM E1369-15

    Guide for:Selecting Techniques for Treating Uncertainty and Risk in the Economic Evaluation of Buildings and Building Systems
  • ASTM E1399_E1399M-97R13E01

    Test Method for:Cyclic Movement and Measuring the Minimum and Maximum Joint Widths of Architectural Joint Systems
  • ASTM E1410

    Practice for:Specifying Data for Evaluation of Energy Used in Residential Buildings
  • ASTM E1423-14

    Practice for:Determining Steady State Thermal Transmittance of Fenestration Systems
  • ASTM E1424-91R08

    Test Method for:Determining the Rate of Air Leakage Through Exterior Windows, Curtain Walls, and Doors Under Specified Pressure and Temperature Differences Across the Specimen
  • ASTM E1425-14

    Practice for:Determining the Acoustical Performance of Windows, Doors, Skylight, and Glazed Wall Systems
  • ASTM E1464

    Guide for:Developing Energy Monitoring Protocols for Commercial and Institutional Buildings or Facilities
  • ASTM E1465-08A

    Practice for:Radon Control Options for the Design and Construction of New Low-Rise Residential Buildings
  • ASTM E1480-92R13

    Terminology of:Facility Management (Building-Related)
  • ASTM E1481-00AR14E01

    Terminology of:Railing Systems and Rails for Buildings
  • ASTM E1486-14

    Test Method for:Determining Floor Tolerances Using Waviness, Wheel Path and Levelness Criteria
  • ASTM E1486M-14

    Test Method for:Determining Floor Tolerances Using Waviness, Wheel Path and Levelness Criteria (Metric)
  • ASTM E1509-12

    Specification for:Room Heaters, Pellet Fuel-Burning Type
  • ASTM E1512-01R15

    Test Methods for:Testing Bond Performance of Bonded Anchors
  • ASTM E1513_E1513M-93R15E01

    Practice for:Application of Sprayed Fire-Resistive Materials (SFRMs)
  • ASTM E1514-98R11

    Specification for:Structural Standing Seam Steel Roof Panel Systems
  • ASTM E1554_E1554M-13

    Test Methods for:Determining Air Leakage of Air Distribution Systems by Fan Pressurization
  • ASTM E1555-12

    Specification for:Structural Paste Adhesive for Sandwich Panel Repair
  • ASTM E1556-12

    Specification for:Epoxy Resin System for Composite Skin, Honeycomb Sandwich Panel Repair
  • ASTM E1557-09R15

    Classification for:Building Elements and Related Sitework—UNIFORMAT II
  • ASTM E1592-05R12

    Test Method for:Structural Performance of Sheet Metal Roof and Siding Systems by Uniform Static Air Pressure Difference
  • ASTM E1602-03R10E01

    Guide for:Construction of Solid Fuel Burning Masonry Heaters
  • ASTM E1605-04R12

    Terminology Relating to:Lead in Buildings
  • ASTM E1612_E1612M-94R13E01

    Specification for:Preformed Architectural Compression Seals for Buildings and Parking Structures
  • ASTM E1613-12

    Test Method for:Determination of Lead by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES), Flame Atomic Absorption Spectrometry (FAAS), or Graphite Furnace Atomic Absorption Spectrometry (GFAAS) Techniques
  • ASTM E1637-98R11

    Specification for:Structural Standing Seam Aluminum Roof Panel Systems
  • ASTM E1643-11

    Practice for:Selection, Design, Installation, and Inspection of Water Vapor Retarders Used in Contact with Earth or Granular Fill Under Concrete Slabs
  • ASTM E1644-04R12E01

    Practice for:Hot Plate Digestion of Dust Wipe Samples for the Determination of Lead
  • ASTM E1645-01R16E01

    Practice for:Preparation of Dried Paint Samples by Hotplate or Microwave Digestion for Subsequent Lead Analysis
  • ASTM E1646-95R11

    Test Method for:Water Penetration of Exterior Metal Roof Panel Systems by Uniform Static Air Pressure Difference
  • ASTM E1660-95AR12

    Classification for:Serviceability of an Office Facility for Support for Office Work
  • ASTM E1661-95AR12

    Classification for:Serviceability of an Office Facility for Meetings and Group Effectiveness
  • ASTM E1662-95AR12

    Classification for:Serviceability of an Office Facility for Sound and Visual Environment
  • ASTM E1663-03R10

    Classification for:Serviceability of an Office Facility for Typical Office Information Technology
  • ASTM E1664-95AR12

    Classification for:Serviceability of an Office Facility for Layout and Building Factors
  • ASTM E1665-95AR12

    Classification for:Serviceability of an Office Facility for Facility Protection
  • ASTM E1666-95AR12

    Classification for:Serviceability of an Office Facility for Work Outside Normal Hours or Conditions
  • ASTM E1667-95AR12

    Classification for:Serviceability of an Office Facility for Image to the Public and Occupants
  • ASTM E1668-95AR12

    Classification for:Serviceability of an Office Facility for Amenities to Attract and Retain Staff
  • ASTM E1669-95AR12

    Classification for:Serviceability of an Office Facility for Location, Access and Wayfinding
  • ASTM E1670-95AR12

    Classification for:Serviceability of an Office Facility for Management of Operations and Maintenance
  • ASTM E1671-95AR12

    Classification for:Serviceability of an Office Facility for Cleanliness
  • ASTM E1677-11

    Specification for:Air Barrier (AB) Material or System for Low-Rise Framed Building Walls
  • ASTM E1679-13

    Practice for:Setting the Requirements for the Serviceability of a Building or Building-Related Facility, and for Determining What Serviceability is Provided or Proposed
  • ASTM E1680-11

    Test Method for:Rate of Air Leakage Through Exterior Metal Roof Panel Systems
  • ASTM E1692-95AR12

    Classification for:Serviceability of an Office Facility for Change and Churn by Occupants
  • ASTM E1693-95R12

    Classification for:Serviceability of an Office Facility for Protection of Occupant Assets
  • ASTM E1694-95AR12

    Classification for:Serviceability of an Office Facility for Special Facilities and Technologies
  • ASTM E1699-14

    Practice for:Performing Value Engineering (VE)/Value Analysis (VA) of Projects, Products and Processes
  • ASTM E1700-13

    Classification for:Serviceability of an Office Facility for Structure and Building Envelope
  • ASTM E1701-95R12

    Classification for:Serviceability of an Office Facility for Manageability
  • ASTM E1726-01R09

    Practice for:Preparation of Soil Samples by Hotplate Digestion for Subsequent Lead Analysis
  • ASTM E1727

    Practice for:Field Collection of Soil Samples for Subsequent Lead Determination
  • ASTM E1728-16

    Practice for:Collection of Settled Dust Samples Using Wipe Sampling Methods for Subsequent Lead Determination
  • ASTM E1729

    Practice for:Field Collection of Dried Paint Samples for Subsequent Lead Determination
  • ASTM E1730-15

    Specification for:Rigid Foam for Use in Structural Sandwich Panel Cores
  • ASTM E1745-11

    Specification for:Plastic Water Vapor Retarders Used in Contact with Soil or Granular Fill under Concrete Slabs
  • ASTM E1748-95R09

    Test Method for:Evaluating the Engagement Between Windows and Insect Screens as an Integral System
  • ASTM E1749-10

    Terminology Relating to:Rigid Wall Relocatable Shelters
  • ASTM E1753-13

    Practice for:Use of Qualitative Chemical Spot Test Kits for Detection of Lead in Dry Paint Films
  • ASTM E1765-11

    Practice for:Applying Analytical Hierarchy Process (AHP) to Multiattribute Decision Analysis of Investments Related to Buildings and Building Systems
  • ASTM E1773-10

    Practice for:Sealing Rigid Wall Tactical Shelters with Polysulfide Based Sealants
  • ASTM E1775-07R16

    Guide for:Evaluating Performance of On-Site Extraction and Field-Portable Electrochemical or Spectrophotometric Analysis for Lead
  • ASTM E1783_E1783M-96R13E01

    Specification for:Preformed Architectural Strip Seals for Buildings and Parking Structures
  • ASTM E1792-03R11

    Specification for:Wipe Sampling Materials for Lead in Surface Dust
  • ASTM E1793-11

    Practice for:Preparation of Aluminum Alloy for Bonding in Foam and Beam Type Transportable Shelters
  • ASTM E1794-13

    Specification for:Adhesive for Bonding Foam Cored Sandwich Panels (200°F Elevated Humidity Service), Type II Panels
  • ASTM E1795-12

    Specification for:Non-Reinforced Liquid Coating Encapsulation Products for Leaded Paint in Buildings
  • ASTM E1796-03R11E01

    Guide for:Selection and Use of Liquid Coating Encapsulation Products for Leaded Paint in Buildings
  • ASTM E1797-12

    Specification for:Reinforced Liquid Coating Encapsulation Products for Leaded Paint in Buildings
  • ASTM E1800-13

    Specification for:Adhesive for Bonding Foam Cored Sandwich Panels (160°F Elevated Humidity Service), Type I Panels
  • ASTM E1801-15

    Practice for:Adhesive Bonding of Aluminum Facings in Foam and Beam Type Shelters
  • ASTM E1803-14

    Test Methods for:Determining Strength Capacities of Structural Insulated Panels
  • ASTM E1804-12

    Practice for:Performing and Reporting Cost Analysis During the Design Phase of a Project
  • ASTM E1825-06R12

    Guide for:Evaluation of Exterior Building Wall Materials, Products, and Systems
  • ASTM E1826-12

    Specification for:Low Volatile Organic Compound (VOC) Corrosion-Inhibiting Adhesive Primer for Aluminum Alloys to Be Adhesively Bonded
  • ASTM E1827-11

    Test Methods for:Determining Airtightness of Buildings Using an Orifice Blower Door
  • ASTM E1836_E1836M-09E01

    Practice for:Building Floor Area Measurements for Facility Management
  • ASTM E1851-15

    Test Method for:Electromagnetic Shielding Effectiveness of Durable Rigid Wall Relocatable Structures
  • ASTM E1857-97R13E01

    Guide for:Selection of Cleaning Techniques for Masonry, Concrete, and Stucco Surfaces
  • ASTM E1886-13A

    Test Method for:Performance of Exterior Windows, Curtain Walls, Doors, and Impact Protective Systems Impacted by Missile(s) and Exposed to Cyclic Pressure Differentials
  • ASTM E1908-10

    Guide for:Sample Selection of Debris Waste from a Building Renovation or Lead Abatement Project for Toxicity Characteristic Leaching Procedure (TCLP) Testing for Leachable Lead (Pb)
  • ASTM E1925-10

    Specification for:Engineering and Design Criteria for Rigid Wall Relocatable Structures
  • ASTM E1946-12

    Practice for:Measuring Cost Risk of Buildings and Building Systems and Other Constructed Projects
  • ASTM E1974-11

    Specification for:Shelter, Electrical Equipment S-250/G
  • ASTM E1975-15

    Specification for:Shelter, Electrical, Equipment S-280/G
  • ASTM E1976-11

    Specification for:Shelter, Tactical, Nonexpandable
  • ASTM E1977-11

    Specification for:Shelter, Tactical, Expandable, One-Side
  • ASTM E1978-11

    Specification for:Shelter, Tactical, Expandable, Two-Side
  • ASTM E1979-12

    Practice for:Ultrasonic Extraction of Paint, Dust, Soil, and Air Samples for Subsequent Determination of Lead
  • ASTM E1993_E1993M-98R13E01

    Specification for:Bituminous Water Vapor Retarders Used in Contact with Soil or Granular Fill Under Concrete Slabs
  • ASTM E1996-14A

    Specification for:Performance of Exterior Windows, Curtain Walls, Doors, and Impact Protective Systems Impacted by Windborne Debris in Hurricanes
  • ASTM E1998-11

    Guide for:Assessing Depressurization-Induced Backdrafting and Spillage from Vented Combustion Appliances
  • ASTM E2004-10

    Test Method for:Facing Cleavage of Sandwich Panels
  • ASTM E2013-12

    Practice for:Constructing FAST Diagrams and Performing Function Analysis During Value Analysis Study
  • ASTM E2025

    Test Method for:Evaluating Fenestration Components and Assemblies for Resistance to Impact Energies
  • ASTM E2026-07

    Guide for:Seismic Risk Assessment of Buildings
  • ASTM E2029-11

    Test Method for:Volumetric and Mass Flow Rate Measurement in a Duct Using Tracer Gas Dilution
  • ASTM E2068-00R08

    Test Method for:Determination of Operating Force of Sliding Windows and Doors
  • ASTM E2083-05R10

    Classification for:Building Construction Field Requirements, and Office Overhead & Profit
  • ASTM E2098_E2098M-13

    Test Method for:Determining Tensile Breaking Strength of Glass Fiber Reinforcing Mesh for Use in Class PB Exterior Insulation and Finish Systems (EIFS), after Exposure to a Sodium Hydroxide Solution
  • ASTM E2099-00R14E01

    Practice for:the Specification and Evaluation of Pre-Construction Laboratory Mockups of Exterior Wall Systems
  • ASTM E2103_E2103M-13

    Classification for:Bridge Elements—UNIFORMAT II
  • ASTM E2110-11

    Terminology for:Exterior Insulation and Finish Systems (EIFS)