한국표준정보망(KSSN)

ASTM Annual Book 수록 리스트

핸드북  >  ASTM

    04.13 : 토목 합성 자재

  • ASTM D1987-07R12

    Test Method for:Biological Clogging of Geotextile or Soil/Geotextile Filters
  • ASTM D2643_D2643M-08R13E01

    Specification for:Prefabricated Bituminous Geomembrane Used as Canal and Ditch Liner (Exposed Type)
  • ASTM D3745_D3745M-95R15E01

    Practice for:Installation of Prefabricated Asphalt Reservoir, Pond, Canal, and Ditch Liner (Exposed Type)
  • ASTM D4354-12

    Practice for:Sampling of Geosynthetics and Rolled Erosion Control Products(RECPs) for Testing
  • ASTM D4355_D4355M-14

    Test Method for:Deterioration of Geotextiles by Exposure to Light, Moisture and Heat in a Xenon Arc Type Apparatus
  • ASTM D4437-08R13

    Practice for:Non-destructive Testing (NDT) for Determining the Integrity of Seams Used in Joining Flexible Polymeric Sheet Geomembranes
  • ASTM D4439-15A

    Terminology for:Geosynthetics
  • ASTM D4491_D4491M-15

    Test Methods for:Water Permeability of Geotextiles by Permittivity
  • ASTM D4533_D4533M-15

    Test Method for:Trapezoid Tearing Strength of Geotextiles
  • ASTM D4594_D4594M-96R15E01

    Test Method for:Effects of Temperature on Stability of Geotextiles
  • ASTM D4595-11

    Test Method for:Tensile Properties of Geotextiles by the Wide-Width Strip Method
  • ASTM D4632_D4632M-15A

    Test Method for:Grab Breaking Load and Elongation of Geotextiles
  • ASTM D4716_D4716M-14

    Test Method for:Determining the (In-plane) Flow Rate per Unit Width and Hydraulic Transmissivity of a Geosynthetic Using a Constant Head
  • ASTM D4751-12

    Test Method for:Determining Apparent Opening Size of a Geotextile
  • ASTM D4759-11

    Practice for:Determining the Specification Conformance of Geosynthetics
  • ASTM D4833_D4833M-07R13E01

    Test Method for:Index Puncture Resistance of Geomembranes and Related Products
  • ASTM D4873_D4873M-16

    Guide for:Identification, Storage, and Handling of Geosynthetic Rolls and Samples
  • ASTM D4884_D4884M-14A

    Test Method for:Strength of Sewn or Bonded Seams of Geotextiles
  • ASTM D4885-01R11

    Test Method for:Determining Performance Strength of Geomembranes by the Wide Strip Tensile Method
  • ASTM D4886-10

    Test Method for:Abrasion Resistance of Geotextiles (Sand Paper/Sliding Block Method)
  • ASTM D5101-12

    Test Method for:Measuring the Filtration Compatibility of Soil-Geotextile Systems
  • ASTM D5141-11

    Test Method for:Determining Filtering Efficiency and Flow Rate of the Filtration Component of a Sediment Retention Device
  • ASTM D5199-12

    Test Method for:Measuring the Nominal Thickness of Geosynthetics
  • ASTM D5261-10

    Test Method for:Measuring Mass per Unit Area of Geotextiles
  • ASTM D5262-07R12

    Test Method for:Evaluating the Unconfined Tension Creep and Creep Rupture Behavior of Geosynthetics
  • ASTM D5321_D5321M-14

    Test Method for:Determining the Shear Strength of Soil-Geosynthetic and Geosynthetic-Geosynthetic Interfaces by Direct Shear
  • ASTM D5322-98R09

    Practice for:Laboratory Immersion Procedures for Evaluating the Chemical Resistance of Geosynthetics to Liquids
  • ASTM D5323-92R11

    Practice for:Determination of 2 % Secant Modulus for Polyethylene Geomembranes
  • ASTM D5397-07R12

    Test Method for:Evaluation of Stress Crack Resistance of Polyolefin Geomembranes Using Notched Constant Tensile Load Test
  • ASTM D5493-06R11

    Test Method for:Permittivity of Geotextiles Under Load
  • ASTM D5494-93R11

    Test Method for the:Determination of Pyramid Puncture Resistance of Unprotected and Protected Geomembranes
  • ASTM D5496-15

    Practice for:In Field Immersion Testing of Geosynthetics
  • ASTM D5514_D5514M-14

    Test Method for:Large Scale Hydrostatic Puncture Testing of Geosynthetics
  • ASTM D5567-94R11

    Test Method for:Hydraulic Conductivity Ratio (HCR) Testing of Soil/Geotextile Systems
  • ASTM D5596-03R09

    Test Method For:Microscopic Evaluation of the Dispersion of Carbon Black in Polyolefin Geosynthetics
  • ASTM D5617-04R15

    Test Method for:Multi-Axial Tension Test for Geosynthetics
  • ASTM D5641-94R11

    Practice for:Geomembrane Seam Evaluation by Vacuum Chamber
  • ASTM D5721-08R13

    Practice for:Air-Oven Aging of Polyolefin Geomembranes
  • ASTM D5747_D5747M-08R13E01

    Practice for:Tests to Evaluate the Chemical Resistance of Geomembranes to Liquids
  • ASTM D5818-11

    Practice for:Exposure and Retrieval of Samples to Evaluate Installation Damage of Geosynthetics
  • ASTM D5819-05R12

    Guide for:Selecting Test Methods for Experimental Evaluation of Geosynthetic Durability
  • ASTM D5820-95R11

    Practice for:Pressurized Air Channel Evaluation of Dual Seamed Geomembranes
  • ASTM D5884_D5884M-04AR15E01

    Test Method for:Determining Tearing Strength of Internally Reinforced Geomembranes
  • ASTM D5885_D5885M-15

    Test Method for:Oxidative Induction Time of Polyolefin Geosynthetics by High-Pressure Differential Scanning Calorimetry
  • ASTM D5886-95R11

    Guide for:Selection of Test Methods to Determine Rate of Fluid Permeation Through Geomembranes for Specific Applications
  • ASTM D5887-09

    Test Method for:Measurement of Index Flux Through Saturated Geosynthetic Clay Liner Specimens Using a Flexible Wall Permeameter
  • ASTM D5888-06R11

    Guide for:Storage and Handling of Geosynthetic Clay Liners
  • ASTM D5889-11

    Practice for:Quality Control of Geosynthetic Clay Liners
  • ASTM D5890-11

    Test Method for:Swell Index of Clay Mineral Component of Geosynthetic Clay Liners
  • ASTM D5891_D5891M-02R16E01

    Test Method for:Fluid Loss of Clay Component of Geosynthetic Clay Liners
  • ASTM D5970_D5970M-16

    Test Method for:Deterioration of Geotextiles from Outdoor Exposure
  • ASTM D5993-14

    Test Method for:Measuring Mass Per Unit of Geosynthetic Clay Liners
  • ASTM D5994_D5994M-10R15E01

    Test Method for:Measuring Core Thickness of Textured Geomembranes
  • ASTM D6072_D6072M-09R15

    Practice for:Obtaining Samples of Geosynthetic Clay Liners
  • ASTM D6088-06R11

    Practice for:Installation of Geocomposite Pavement Drains
  • ASTM D6102-15

    Guide for:Installation of Geosynthetic Clay Liners
  • ASTM D6140-00R14

    Test Method to:Determine Asphalt Retention of Paving Fabrics Used in Asphalt Paving for Full-Width Applications
  • ASTM D6141-14

    Guide for:Screening Clay Portion and Index Flux of Geosynthetic Clay Liner (GCL) for Chemical Compatibility to Liquids
  • ASTM D6213-97R09

    Practice for:Tests to Evaluate the Chemical Resistance of Geogrids to Liquids
  • ASTM D6214_D6214M-98R13E01

    Test Method for:Determining the Integrity of Field Seams Used in Joining Geomembranes by Chemical Fusion Methods
  • ASTM D6241-14

    Test Method for:Static Puncture Strength of Geotextiles and Geotextile-Related Products Using a 50-mm Probe
  • ASTM D6243_D6243M-16

    Test Method for:Determining the Internal and Interface Shear Strength of Geosynthetic Clay Liner by the Direct Shear Method
  • ASTM D6244-06R11

    Test Method for:Vertical Compression of Geocomposite Pavement Panel Drains
  • ASTM D6364-06R11

    Test Method for:Determining Short-Term Compression Behavior of Geosynthetics
  • ASTM D6365-99R11

    Practice for:the Nondestructive Testing of Geomembrane Seams using the Spark Test
  • ASTM D6388-99R12

    Practice for:Tests to Evaluate the Chemical Resistance of Geonets to Liquids
  • ASTM D6389-99R12

    Practice for:Tests to Evaluate the Chemical Resistance of Geotextiles to Liquids
  • ASTM D6392-12

    Test Method for:Determining the Integrity of Nonreinforced Geomembrane Seams Produced Using Thermo-Fusion Methods
  • ASTM D6434-12

    Guide for the:Selection of Test Methods for Flexible Polypropylene Geomembranes
  • ASTM D6454_D6454M-99R16E01

    Test Method for:Determining the Short-Term Compression Behavior of Turf Reinforcement Mats (TRMs)
  • ASTM D6455-11

    Guide for the:Selection of Test Methods for Prefabricated Bituminous Geomembranes (PBGM)
  • ASTM D6495_D6495M-15

    Guide for:Acceptance Testing Requirements for Geosynthetic Clay Liners
  • ASTM D6496_D6496M-04AR15E01

    Test Method for:Determining Average Bonding Peel Strength Between Top and Bottom Layers of Needle-Punched Geosynthetic Clay Liners
  • ASTM D6497_D6497M-02R15E01

    Guide for:Mechanical Attachment of Geomembrane to Penetrations or Structures
  • ASTM D6523-00R14E01

    Guide for:Evaluation and Selection of Alternative Daily Covers (ADCs) for Sanitary Landfills
  • ASTM D6524-00R11

    Test Method for:Measuring the Resiliency of Turf Reinforcement Mats (TRMs)
  • ASTM D6525_D6525M-14

    Test Method for:Measuring Nominal Thickness of Rolled Erosion Control Products
  • ASTM D6566-14

    Test Method for:Measuring Mass per Unit Area of Turf Reinforcement Mats
  • ASTM D6567-14

    Test Method for:Measuring the Light Penetration of a Turf Reinforcement Mat (TRM)
  • ASTM D6574_D6574M-13E01

    Test Method for:Determining the (In-Plane) Hydraulic Transmissivity of a Geosynthetic by Radial Flow
  • ASTM D6575-14A

    Test Method for:Determining Stiffness of Geosynthetics Used as Turf Reinforcement Mats (TRMs)
  • ASTM D6636-01R11

    Test Method for:Determination of Ply Adhesion Strength of Reinforced Geomembranes
  • ASTM D6637_D6637M-15

    Test Method for:Determining Tensile Properties of Geogrids by the Single or Multi-Rib Tensile Method
  • ASTM D6638-11

    Test Method for:Determining Connection Strength Between Geosynthetic Reinforcement and Segmental Concrete Units (Modular Concrete Blocks)
  • ASTM D6693_D6693M-04R15E01

    Test Method for:Determining Tensile Properties of Nonreinforced Polyethylene and Nonreinforced Flexible Polypropylene Geomembranes
  • ASTM D6706-01R13

    Test Method for:Measuring Geosynthetic Pullout Resistance in Soil
  • ASTM D6707-06R11

    Specification for:Circular-Knit Geotextile for Use in Subsurface Drainage Applications
  • ASTM D6747-15

    Guide for:Selection of Techniques for Electrical Leak Location of Leaks in Geomembranes
  • ASTM D6766-12

    Test Method for:Evaluation of Hydraulic Properties of Geosynthetic Clay Liners Permeated with Potentially Incompatible Aqueous Solutions
  • ASTM D6767-14

    Test Method for:Pore Size Characteristics of Geotextiles by Capillary Flow Test
  • ASTM D6768_D6768M-04R15E02

    Test Method for:Tensile Strength of Geosynthetic Clay Liners
  • ASTM D6817_D6817M-15

    Specification for:Rigid Cellular Polystyrene Geofoam
  • ASTM D6818-14

    Test Method for:Ultimate Tensile Properties of Rolled Erosion Control Products
  • ASTM D6826-05R14E01

    Specification for:Sprayed Slurries, Foams and Indigenous Materials Used As Alternative Daily Cover for Municipal Solid Waste Landfills
  • ASTM D6916-06CR11

    Test Method for:Determining the Shear Strength Between Segmental Concrete Units (Modular Concrete Blocks)
  • ASTM D6917-03R11

    Guide for:Selection of Test Methods for Prefabricated Vertical Drains (PVD)
  • ASTM D6918-09R14E01

    Test Method for:Testing Vertical Strip Drains in the Crimped Condition
  • ASTM D6992-03R15

    Test Method for:Accelerated Tensile Creep and Creep-Rupture of Geosynthetic Materials Based on Time-Temperature Superposition Using the Stepped Isothermal Method
  • ASTM D7001-06R11

    Specification for:Geocomposites for Pavement Edge Drains and Other High-Flow Applications
  • ASTM D7002-16

    Practice for:Electrical Leak Location on Exposed Geomembranes Using the Water Puddle Method
  • ASTM D7003_D7003M-03R13E01

    Test Method for:Strip Tensile Properties of Reinforced Geomembranes
  • ASTM D7004_D7004M-03R13E01

    Test Method for:Grab Tensile Properties of Reinforced Geomembranes
  • ASTM D7005_D7005M-16

    Test Method for:Determining the Bond Strength (Ply Adhesion) of Geocomposites
  • ASTM D7006-03R13

    Practice for:Ultrasonic Testing of Geomembranes
  • ASTM D7007-16

    Practices for:Electrical Methods for Locating Leaks in Geomembranes Covered with Water or Earthen Materials
  • ASTM D7008-08R13

    Specification for:Geosynthetic Alternate Daily Covers
  • ASTM D7056-07R12

    Test Method for:Determining the Tensile Shear Strength of Pre-Fabricated Bituminous Geomembrane Seams
  • ASTM D7106_D7106M-05R15E01

    Guide for:Selection of Test Methods for Ethylene Propylene Diene Terpolymer (EPDM) Geomembranes
  • ASTM D7176-06R11

    Specification for:Non-Reinforced Polyvinyl Chloride (PVC) Geomembranes Used in Buried Applications
  • ASTM D7177_D7177M-05R15E01

    Specification for:Air Channel Evaluation of Polyvinyl Chloride (PVC) Dual Track Seamed Geomembranes
  • ASTM D7178-06R11

    Practice for:Determining the Number of Constrictions “m” of Non-Woven Geotextiles as a Complementary Filtration Property
  • ASTM D7179-07R13

    Test Method for:Determining Geonet Breaking Force
  • ASTM D7180_D7180M-05R13E01

    Guide for:Use of Expanded Polystyrene (EPS) Geofoam in Geotechnical Projects
  • ASTM D7238-06R12

    Test Method for:Effect of Exposure of Unreinforced Polyolefin Geomembrane Using Fluorescent UV Condensation Apparatus
  • ASTM D7239-13

    Specification for:Hybrid Geosynthetic Paving Mat for Highway Applications
  • ASTM D7240-06R11

    Practice for:Leak Location using Geomembranes with an Insulating Layer in Intimate Contact with a Conductive Layer via Electrical Capacitance Technique (Conductive Geomembrane Spark Test)
  • ASTM D7272-06R11

    Test Method for:Determining the Integrity of Seams Used in Joining Geomembranes by Pre-manufactured Taped Methods
  • ASTM D7273_D7273M-08R13E01

    Guide for:for Acceptance Testing Requirements for Geonets and Geonet Drainage Geocomposites
  • ASTM D7274-06AR11

    Test Method for:Mineral Stabilizer Content of Prefabricated Bituminous Geomembranes (BGM)
  • ASTM D7275-07R12

    Test Method for:Tensile Properties of Bituminous Geomembranes (BGM)
  • ASTM D7361-07R12

    Test Method for:Accelerated Compressive Creep of Geosynthetic Materials Based on Time-Temperature Superposition Using the Stepped Isothermal Method
  • ASTM D7406-07R12

    Test Method for:Time-Dependent (Creep) Deformation Under Constant Pressure for Geosynthetic Drainage Products
  • ASTM D7407-07R12

    Guide for Determining:The Transmission of Gases Through Geomembranes
  • ASTM D7408-12

    Specification for:Non Reinforced PVC (Polyvinyl Chloride) Geomembrane Seams
  • ASTM D7409-15

    Test Method for:Carboxyl End Group Content of Polyethylene Terephthalate (PET) Yarns
  • ASTM D7465_D7465M-15E01

    Specification for:Ethylene Propylene Diene Terpolymer (EPDM) Sheet Used In Geomembrane Applications
  • ASTM D7466_D7466M-10R15E01

    Test Method for:Measuring Asperity Height of Textured Geomembranes
  • ASTM D7498_D7498M-09R14E01

    Test Method for:Vertical Strip Drains Using a Large Scale Consolidation Test
  • ASTM D7499_D7499M-09R14

    Test Method for:Measuring Geosynthetic-Soil Resilient Interface Shear Stiffness
  • ASTM D7556-10

    Test Methods for:Determining Small-Strain Tensile Properties of Geogrids and Geotextiles by In-Air Cyclic Tension Tests
  • ASTM D7557_D7557M-09R13E01

    Practice for:Sampling of Expanded Polystyrene Geofoam Specimens
  • ASTM D7613-10

    Specification for:Flexible Polypropylene Reinforced (fPP-R) and Nonreinforced (fPP) Geomembranes
  • ASTM D7700-15

    Guide for:Selecting Test Methods for Geomembrane Seams
  • ASTM D7701-11

    Test Method for:Determining the Flow Rate of Water and Suspended Solids from a Geotextile Bag
  • ASTM D7702_D7702M-14

    Guide for:Considerations When Evaluating Direct Shear Results Involving Geosynthetics
  • ASTM D7703-16

    Practice for:Electrical Leak Location on Exposed Geomembranes Using the Water Lance Method
  • ASTM D7737_D7737M-15

    Test Method for:Individual Geogrid Junction Strength
  • ASTM D7747_D7747M-11E01

    Test Method for:Determining Integrity of Seams Produced Using Thermo-Fusion Methods for Reinforced Geomembranes by the Strip Tensile Method
  • ASTM D7748_D7748M-14

    Test Method for:Flexural Rigidity of Geogrids, Geotextiles and Related Products
  • ASTM D7749-11

    Test Method for:Determining Integrity of Seams Produced Using Thermo-Fusion Methods for Reinforced Geomembranes by the Grab Method
  • ASTM D7852-13

    Practice for:Use of an Electrically Conductive Geotextile for Leak Location Surveys
  • ASTM D7853-13

    Test Method for:Hydraulic Pullout Resistance of a Geomembrane with Locking Extensions Embedded in Concrete
  • ASTM D7864_D7864M-15

    Test Method for:Determining the Aperture Stability Modulus of Geogrids
  • ASTM D7865-13

    Guide for:Identification, Packaging, Handling, Storage and Deployment of Fabricated Geomembrane Panels
  • ASTM D7880_D7880M-13

    Test Method for:Determining Flow Rate of Water and Suspended Solids Retention from a Closed Geosynthetic Bag
  • ASTM D7909-14

    Guide for:Placement of Blind Actual Leaks during Electrical Leak Location Surveys of Geomembranes
  • ASTM D7953-14

    Practice for:Electrical Leak Location on Exposed Geomembranes Using the Arc Testing Method
  • ASTM D7982-15

    Practice for:Testing of Factory Thermo-Fusion Seams for Fabricated Geomembrane Panels
  • ASTM D8030_D8030M-16

    Practice for:Sample Preparation for GCCM