한국표준정보망(KSSN)

ASTM Annual Book 수록 리스트

핸드북  >  ASTM

    05.01 : 석유제품 및 윤활유(Ⅰ) D56-D3710

  • ASTM D0056-05R10

    Test Method for:Flash Point by Tag Closed Cup Tester
  • ASTM D0061-15

    Test Method for:Softening Point of Pitches (Cube-in-Water Method)
  • ASTM D0071-94R15E01

    Test Method for:Relative Density of Solid Pitch and Asphalt (Displacement Method)
  • ASTM D0086-15

    Test Method for:Distillation of Petroleum Products and Liquid Fuels at Atmospheric Pressure
  • ASTM D0087-09R14

    Test Method for:Melting Point of Petroleum Wax (Cooling Curve)
  • ASTM D0091-02R12

    Test Method for:Precipitation Number of Lubricating Oils
  • ASTM D0092-12B

    Test Method for:Flash and Fire Points by Cleveland Open Cup Tester
  • ASTM D0093-15A

    Test Methods for:Flash Point by Pensky-Martens Closed Cup Tester
  • ASTM D0094-07R12E01

    Test Methods for:Saponification Number of Petroleum Products
  • ASTM D0095-13E01

    Test Method for:Water in Petroleum Products and Bituminous Materials by Distillation
  • ASTM D0097-16

    Test Method for:Pour Point of Petroleum Products
  • ASTM D0127-08R15

    Test Method for:Drop Melting Point of Petroleum Wax, Including Petrolatum
  • ASTM D0128-98R14E01

    Test Methods for:Analysis of Lubricating Grease
  • ASTM D0129-13

    Test Method for:Sulfur in Petroleum Products (General High Pressure Decomposition Device Method)
  • ASTM D0130-12

    Test Method for:Corrosiveness to Copper from Petroleum Products by Copper Strip Test
  • ASTM D0156-15

    Test Method for:Saybolt Color of Petroleum Products (Saybolt Chromometer Method)
  • ASTM D0187-08R13

    Test Method for:Burning Quality of Kerosine
  • ASTM D0189-06R14

    Test Method for:Conradson Carbon Residue of Petroleum Products
  • ASTM D0217-10

    Test Methods for:Cone Penetration of Lubricating Grease
  • ASTM D0240-14

    Test Method for:Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter
  • ASTM D0287-12B

    Test Method for:API Gravity of Crude Petroleum and Petroleum Products (Hydrometer Method)
  • ASTM D0322-97R12

    Test Method for:Gasoline Diluent in Used Gasoline Engine Oils by Distillation
  • ASTM D0323-15A

    Test Method for:Vapor Pressure of Petroleum Products (Reid Method)
  • ASTM D0341-09R15

    Practice for:Viscosity-Temperature Charts for Liquid Petroleum Products
  • ASTM D0381-12

    Test Method for:Gum Content in Fuels by Jet Evaporation
  • ASTM D0396-15C

    Specification for:Fuel Oils
  • ASTM D0445-15A

    Test Method for:Kinematic Viscosity of Transparent and Opaque Liquids (and Calculation of Dynamic Viscosity)
  • ASTM D0446-12

    Specifications and Operating Instructions for:Glass Capillary Kinematic Viscometers
  • ASTM D0473-07R12

    Test Method for:Sediment in Crude Oils and Fuel Oils by the Extraction Method
  • ASTM D0482-13

    Test Method for:Ash from Petroleum Products
  • ASTM D0483-04R14

    Test Method for:Unsulfonated Residue of Petroleum Plant Spray Oils
  • ASTM D0524-15

    Test Method for:Ramsbottom Carbon Residue of Petroleum Products
  • ASTM D0525-12A

    Test Method for:Oxidation Stability of Gasoline (Induction Period Method)
  • ASTM D0565-99R13

    Test Method for:Carbonizable Substances in White Mineral Oil
  • ASTM D0566-02R09

    Test Method for:Dropping Point of Lubricating Grease
  • ASTM D0611-12

    Test Methods for:Aniline Point and Mixed Aniline Point of Petroleum Products and Hydrocarbon Solvents
  • ASTM D0612-88R12

    Test Method for:Carbonizable Substances in Paraffin Wax
  • ASTM D0664-11A

    Test Method for:Acid Number of Petroleum Products by Potentiometric Titration
  • ASTM D0665-14E01

    Test Method for:Rust-Preventing Characteristics of Inhibited Mineral Oil in the Presence of Water
  • ASTM D0721-15

    Test Method for:Oil Content of Petroleum Waxes
  • ASTM D0808-11

    Test Method for:Chlorine in New and Used Petroleum Products (High Pressure Decomposition Device Method)
  • ASTM D0873-12

    Test Method for:Oxidation Stability of Aviation Fuels (Potential Residue Method)
  • ASTM D0874-13A

    Test Method for:Sulfated Ash from Lubricating Oils and Additives
  • ASTM D0892-13

    Test Method for:Foaming Characteristics of Lubricating Oils
  • ASTM D0893-14

    Test Method for:Insolubles in Used Lubricating Oils
  • ASTM D0910-15

    Specification for:Leaded Aviation Gasolines
  • ASTM D0937-07R12

    Test Method for:Cone Penetration of Petrolatum
  • ASTM D0938-12

    Test Method for:Congealing Point of Petroleum Waxes, Including Petrolatum
  • ASTM D0942-15

    Test Method for:Oxidation Stability of Lubricating Greases by the Oxygen Pressure Vessel Method
  • ASTM D0943-04AR10E01

    Test Method for:Oxidation Characteristics of Inhibited Mineral Oils
  • ASTM D0972-02R08

    Test Method for:Evaporation Loss of Lubricating Greases and Oils
  • ASTM D0974-14E01

    Test Method for:Acid and Base Number by Color-Indicator Titration
  • ASTM D0975-15C

    Specification for:Diesel Fuel Oils
  • ASTM D0976-06R11

    Test Method for:Calculated Cetane Index of Distillate Fuels
  • ASTM D1015-05R15

    Test Method for:Freezing Points of High-Purity Hydrocarbons
  • ASTM D1016-05R15

    Test Method for:Purity of Hydrocarbons from Freezing Points
  • ASTM D1018-11

    Test Method for:Hydrogen In Petroleum Fractions
  • ASTM D1025-10R15E01

    Test Method for:Nonvolatile Residue of Polymerization-Grade Butadiene
  • ASTM D1091-11

    Test Methods for:Phosphorus in Lubricating Oils and Additives
  • ASTM D1092-12

    Test Method for:Measuring Apparent Viscosity of Lubricating Greases
  • ASTM D1093-11

    Test Method for:Acidity of Hydrocarbon Liquids and Their Distillation Residues
  • ASTM D1094-07R13

    Test Method for:Water Reaction of Aviation Fuels
  • ASTM D1157-91R14

    Test Method for:Total Inhibitor Content (TBC) of Light Hydrocarbons
  • ASTM D1159-07R12

    Test Method for:Bromine Numbers of Petroleum Distillates and Commercial Aliphatic Olefins by Electrometric Titration
  • ASTM D1160-15

    Test Method for:Distillation of Petroleum Products at Reduced Pressure
  • ASTM D1217-15

    Test Method for:Density and Relative Density (Specific Gravity) of Liquids by Bingham Pycnometer
  • ASTM D1218-12

    Test Method for:Refractive Index and Refractive Dispersion of Hydrocarbon Liquids
  • ASTM D1250-08R13E01

    Guide for:Use of the Petroleum Measurement Tables
  • ASTM D1264-12

    Test Method for:Determining the Water Washout Characteristics of Lubricating Greases
  • ASTM D1265-11

    Practice for:Sampling Liquefied Petroleum (LP) Gases, Manual Method
  • ASTM D1266-13

    Test Method for:Sulfur in Petroleum Products (Lamp Method)
  • ASTM D1267-12

    Test Method for:Gage Vapor Pressure of Liquefied Petroleum (LP) Gases (LP-Gas Method)
  • ASTM D1298-12B

    Test Method for:Density, Relative Density, or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method
  • ASTM D1318-00R11

    Test Method for:Sodium in Residual Fuel Oil (Flame Photometric Method)
  • ASTM D1319-15

    Test Method for:Hydrocarbon Types in Liquid Petroleum Products by Fluorescent Indicator Adsorption
  • ASTM D1321-10R15

    Test Method for:Needle Penetration of Petroleum Waxes
  • ASTM D1322-15E01

    Test Method for:Smoke Point of Kerosine and Aviation Turbine Fuel
  • ASTM D1401-12E01

    Test Method for:Water Separability of Petroleum Oils and Synthetic Fluids
  • ASTM D1403-10

    Test Methods for:Cone Penetration of Lubricating Grease Using One-Quarter and One-Half Scale Cone Equipment
  • ASTM D1404_D1404M-99R14

    Test Method for:Estimation of Deleterious Particles in Lubricating Grease
  • ASTM D1405_D1405M-08R13

    Test Method for:Estimation of Net Heat of Combustion of Aviation Fuels
  • ASTM D1465-10R15

    Test Method for:Blocking and Picking Points of Petroleum Wax
  • ASTM D1478-11

    Test Method for:Low-Temperature Torque of Ball Bearing Grease
  • ASTM D1480-15

    Test Method for:Density and Relative Density (Specific Gravity) of Viscous Materials by Bingham Pycnometer
  • ASTM D1481-12

    Test Method for:Density and Relative Density (Specific Gravity) of Viscous Materials by Lipkin Bicapillary Pycnometer
  • ASTM D1500-12

    Test Method for:ASTM Color of Petroleum Products (ASTM Color Scale)
  • ASTM D1550-94R15

    Standard:ASTM Butadiene Measurement Tables
  • ASTM D1552-15

    Test Method for:Sulfur in Petroleum Products by High Temperature Combustion and IR Detection
  • ASTM D1655-15DE01

    Specification for:Aviation Turbine Fuels
  • ASTM D1657-12E01

    Test Method for:Density or Relative Density of Light Hydrocarbons by Pressure Hydrometer
  • ASTM D1662-08R14

    Test Method for:Active Sulfur in Cutting Oils
  • ASTM D1742-06R13

    Test Method for:Oil Separation from Lubricating Grease During Storage
  • ASTM D1743-13

    Test Method for:Determining Corrosion Preventive Properties of Lubricating Greases
  • ASTM D1744-13

    Test Method for:Determination of Water in Liquid Petroleum Products by Karl Fischer Reagent
  • ASTM D1747-09R14

    Test Method for:Refractive Index of Viscous Materials
  • ASTM D1748-10R15

    Test Method for:Rust Protection by Metal Preservatives in the Humidity Cabinet
  • ASTM D1796-11E01

    Test Method for:Water and Sediment in Fuel Oils by the Centrifuge Method (Laboratory Procedure)
  • ASTM D1831-11

    Test Method for:Roll Stability of Lubricating Grease
  • ASTM D1832

    Test Method for:Peroxide Number of Petroleum Wax
  • ASTM D1833-87R12

    Test Method for:Odor of Petroleum Wax
  • ASTM D1835-13

    Specification for:Liquefied Petroleum (LP) Gases
  • ASTM D1837-11

    Test Method for:Volatility of Liquefied Petroleum (LP) Gases
  • ASTM D1838-14

    Test Method for:Copper Strip Corrosion by Liquefied Petroleum (LP) Gases
  • ASTM D1839-14

    Test Method for:Amyl Nitrate in Diesel Fuels
  • ASTM D1840-07R13

    Test Method for:Naphthalene Hydrocarbons in Aviation Turbine Fuels by Ultraviolet Spectrophotometry
  • ASTM D2001-07R12

    Test Method for:Depentanization of Gasoline and Naphthas
  • ASTM D2007-11

    Test Method for:Characteristic Groups in Rubber Extender and Processing Oils and Other Petroleum-Derived Oils by the Clay-Gel Absorption Chromatographic Method
  • ASTM D2008-12

    Test Method for:Ultraviolet Absorbance and Absorptivity of Petroleum Products
  • ASTM D2068-14

    Test Method for:Determining Filter Blocking Tendency
  • ASTM D2070-91R10

    Test Method for:Thermal Stability of Hydraulic Oils
  • ASTM D2155-12

    Test Method for:Determination of Fire Resistance of Aircraft Hydraulic Fluids by Autoignition Temperature
  • ASTM D2156-09R13

    Test Method for:Smoke Density in Flue Gases from Burning Distillate Fuels
  • ASTM D2157-94R13

    Test Method for:Effect of Air Supply on Smoke Density in Flue Gases from Burning Distillate Fuels
  • ASTM D2158-11

    Test Method for:Residues in Liquefied Petroleum (LP) Gases
  • ASTM D2161-10E01

    Practice for:Conversion of Kinematic Viscosity to Saybolt Universal Viscosity or to Saybolt Furol Viscosity
  • ASTM D2162-14

    Practice for:Basic Calibration of Master Viscometers and Viscosity Oil Standards
  • ASTM D2163-14E01

    Test Method for:Determination of Hydrocarbons in Liquefied Petroleum (LP) Gases and Propane/Propene Mixtures by Gas Chromatography
  • ASTM D2265-15

    Test Method for:Dropping Point of Lubricating Grease Over Wide Temperature Range
  • ASTM D2266-01R15

    Test Method for:Wear Preventive Characteristics of Lubricating Grease (Four-Ball Method)
  • ASTM D2268-93R13

    Test Method for:Analysis of High-Purity n-Heptane and Isooctane by Capillary Gas Chromatography
  • ASTM D2269-10R15

    Test Method for:Evaluation of White Mineral Oils by Ultraviolet Absorption
  • ASTM D2270-10E01

    Practice for:Calculating Viscosity Index from Kinematic Viscosity at 40 and 100°C
  • ASTM D2272-14A

    Test Method for:Oxidation Stability of Steam Turbine Oils by Rotating Pressure Vessel
  • ASTM D2273-08R12

    Test Method for:Trace Sediment in Lubricating Oils
  • ASTM D2274-14

    Test Method for:Oxidation Stability of Distillate Fuel Oil (Accelerated Method)
  • ASTM D2276-06R14

    Test Method for:Particulate Contaminant in Aviation Fuel by Line Sampling
  • ASTM D2318-15

    Test Method for:Quinoline-Insoluble (QI) Content of Tar and Pitch
  • ASTM D2319_D2319M-14E01

    Test Method for:Softening Point of Pitch (Cube-in-Air Method)
  • ASTM D2320-98R12

    Test Method for:Density (Relative Density) of Solid Pitch (Pycnometer Method)
  • ASTM D2384-83R14

    Test Methods for:Traces of Volatile Chlorides in Butane-Butene Mixtures
  • ASTM D2386-15E01

    Test Method for:Freezing Point of Aviation Fuels
  • ASTM D2392-15

    Test Method for:Color of Dyed Aviation Gasolines
  • ASTM D2415-15

    Test Method for:Ash in Coal Tar and Pitch
  • ASTM D2416-84R15E01

    Test Method for:Coking Value of Tar and Pitch (Modified Conradson)
  • ASTM D2420-13

    Test Method for:Hydrogen Sulfide in Liquefied Petroleum (LP) Gases (Lead Acetate Method)
  • ASTM D2421-13

    Practice for:Interconversion of Analysis of C5 and Lighter Hydrocarbons to Gas-Volume, Liquid-Volume, or Mass Basis
  • ASTM D2422-97R13

    Classification of:Industrial Fluid Lubricants by Viscosity System
  • ASTM D2423-90R12E01

    Test Method for:Surface Wax on Waxed Paper or Paperboard
  • ASTM D2425-04R09

    Test Method for:Hydrocarbon Types in Middle Distillates by Mass Spectrometry
  • ASTM D2426-93R14

    Test Method for:Butadiene Dimer and Styrene in Butadiene Concentrates by Gas Chromatography
  • ASTM D2427-06R15

    Test Method for:Determination of C2 through C5 Hydrocarbons in Gasolines by Gas Chromatography
  • ASTM D2500-16

    Test Method for:Cloud Point of Petroleum Products
  • ASTM D2501-14

    Test Method for:Calculation of Viscosity-Gravity Constant (VGC) of Petroleum Oils
  • ASTM D2502-14

    Test Method for:Estimation of Mean Relative Molecular Mass of Petroleum Oils from Viscosity Measurements
  • ASTM D2503-92R12

    Test Method for:Relative Molecular Mass (Molecular Weight) of Hydrocarbons by Thermoelectric Measurement of Vapor Pressure
  • ASTM D2504-88R15

    Test Method for:Noncondensable Gases in C2 and Lighter Hydrocarbon Products by Gas Chromatography
  • ASTM D2505-88R15

    Test Method for:Ethylene, Other Hydrocarbons, and Carbon Dioxide in High-Purity Ethylene by Gas Chromatography
  • ASTM D2509-14

    Test Method for:Measurement of Load-Carrying Capacity of Lubricating Grease (Timken Method)
  • ASTM D2510-94R12

    Test Method for:Adhesion of Solid Film Lubricants
  • ASTM D2511-93R14

    Test Method for:Thermal Shock Sensitivity of Solid Film Lubricants
  • ASTM D2532-14

    Test Method for:Viscosity and Viscosity Change After Standing at Low Temperature of Aircraft Turbine Lubricants
  • ASTM D2534-88R12

    Test Method for:Coefficient of Kinetic Friction for Wax Coatings
  • ASTM D2549-02R12

    Test Method for:Separation of Representative Aromatics and Nonaromatics Fractions of High-Boiling Oils by Elution Chromatography
  • ASTM D2593-93R14

    Test Method for:Butadiene Purity and Hydrocarbon Impurities by Gas Chromatography
  • ASTM D2595-96R08E01

    Test Method for:Evaporation Loss of Lubricating Greases Over Wide-Temperature Range
  • ASTM D2596-15

    Test Method for:Measurement of Extreme-Pressure Properties of Lubricating Grease (Four-Ball Method)
  • ASTM D2597-10

    Test Method for:Analysis of Demethanized Hydrocarbon Liquid Mixtures Containing Nitrogen and Carbon Dioxide by Gas Chromatography
  • ASTM D2598-12

    Practice for:Calculation of Certain Physical Properties of Liquefied Petroleum (LP) Gases from Compositional Analysis
  • ASTM D2603-01R13

    Test Method for:Sonic Shear Stability of Polymer-Containing Oils
  • ASTM D2619-09R14

    Test Method for:Hydrolytic Stability of Hydraulic Fluids (Beverage Bottle Method)
  • ASTM D2622-10

    Test Method for:Sulfur in Petroleum Products by Wavelength Dispersive X-ray Fluorescence Spectrometry
  • ASTM D2624-15

    Test Methods for:Electrical Conductivity of Aviation and Distillate Fuels
  • ASTM D2625-94R15

    Test Method for:Endurance (Wear) Life and Load-Carrying Capacity of Solid Film Lubricants (Falex Pin and Vee Method)
  • ASTM D2638-10R15E01

    Test Method for:Real Density of Calcined Petroleum Coke by Helium Pycnometer
  • ASTM D2649-04R14

    Test Method for:Corrosion Characteristics of Solid Film Lubricants
  • ASTM D2650-10R15

    Test Method for:Chemical Composition of Gases by Mass Spectrometry
  • ASTM D2669-06R12E01

    Test Method for:Apparent Viscosity of Petroleum Waxes Compounded with Additives (Hot Melts)
  • ASTM D2670-95R10

    Test Method for:Measuring Wear Properties of Fluid Lubricants (Falex Pin and Vee Block Method)
  • ASTM D2709-96R11E01

    Test Method for:Water and Sediment in Middle Distillate Fuels by Centrifuge
  • ASTM D2710-09R13

    Test Method for:Bromine Index of Petroleum Hydrocarbons by Electrometric Titration
  • ASTM D2711-11

    Test Method for:Demulsibility Characteristics of Lubricating Oils
  • ASTM D2712-91R10

    Test Method for:Hydrocarbon Traces in Propylene Concentrates by Gas Chromatography
  • ASTM D2713-15

    Test Method for:Dryness of Propane (Valve Freeze Method)
  • ASTM D2714-94R14

    Test Method for:Calibration and Operation of the Falex Block-on-Ring Friction and Wear Testing Machine
  • ASTM D2715-92R12

    Test Method for:Volatilization Rates of Lubricants in Vacuum
  • ASTM D2717-95R09

    Test Method for:Thermal Conductivity of Liquids
  • ASTM D2764-99R15E01

    Test Method for:Dimethylformamide-Insoluble (DMF-I) Content of Tar and Pitch
  • ASTM D2766-95R09

    Test Method for:Specific Heat of Liquids and Solids
  • ASTM D2779-92R12

    Test Method for:Estimation of Solubility of Gases in Petroleum Liquids
  • ASTM D2782-02R14

    Test Method for:Measurement of Extreme-Pressure Properties of Lubricating Fluids (Timken Method)
  • ASTM D2783-03R14

    Test Method for:Measurement of Extreme-Pressure Properties of Lubricating Fluids (Four-Ball Method)
  • ASTM D2784-11

    Test Method for:Sulfur in Liquefied Petroleum Gases (Oxy-Hydrogen Burner or Lamp)
  • ASTM D2786-91R11

    Test Method for:Hydrocarbon Types Analysis of Gas-Oil Saturates Fractions by High Ionizing Voltage Mass Spectrometry
  • ASTM D2789-95R11

    Test Method for:Hydrocarbon Types in Low Olefinic Gasoline by Mass Spectrometry
  • ASTM D2878-10

    Test Method for:Estimating Apparent Vapor Pressures and Molecular Weights of Lubricating Oils
  • ASTM D2879-10

    Test Method for:Vapor Pressure-Temperature Relationship and Initial Decomposition Temperature of Liquids by Isoteniscope
  • ASTM D2880-15

    Specification for:Gas Turbine Fuel Oils
  • ASTM D2881-12R14

    Classification for:Metalworking Fluids and Related Materials
  • ASTM D2883-95R09

    Test Method for:Reaction Threshold Temperature of Liquid and Solid Materials
  • ASTM D2884-93R12

    Test Method for:Yield Stress of Heterogeneous Propellants by Cone Penetration Method
  • ASTM D2887-15E01

    Test Method for:Boiling Range Distribution of Petroleum Fractions by Gas Chromatography
  • ASTM D2889-95R15

    Test Method for:Calculation of True Vapor Pressures of Petroleum Distillate Fuels
  • ASTM D2890-92R13

    Test Method for:Calculation of Liquid Heat Capacity of Petroleum Distillate Fuels
  • ASTM D2892-15

    Test Method for:Distillation of Crude Petroleum (15-Theoretical Plate Column)
  • ASTM D2893-04R14E01

    Test Methods for:Oxidation Characteristics of Extreme-Pressure Lubrication Oils
  • ASTM D2896-11

    Test Method for:Base Number of Petroleum Products by Potentiometric Perchloric Acid Titration
  • ASTM D2962-10

    Practice for:Calculating Volume-Temperature Correction For Coal-Tar Pitches
  • ASTM D2981-94R14

    Test Method for:Wear Life of Solid Film Lubricants in Oscillating Motion
  • ASTM D2982-07R13

    Test Methods for:Detecting Glycol-Base Antifreeze in Used Lubricating Oils
  • ASTM D2983-15

    Test Method for:Low-Temperature Viscosity of Lubricants Measured by Brookfield Viscometer
  • ASTM D3104-14A

    Test Method for:Softening Point of Pitches (Mettler Softening Point Method)
  • ASTM D3115-95R14

    Test Method for:Explosive Reactivity of Lubricants with Aerospace Alloys Under High Shear
  • ASTM D3120-08R14

    Test Method for:Trace Quantities of Sulfur in Light Liquid Petroleum Hydrocarbons by Oxidative Microcoulometry
  • ASTM D3227-13

    Test Method for:(Thiol Mercaptan) Sulfur in Gasoline, Kerosine, Aviation Turbine, and Distillate Fuels (Potentiometric Method)
  • ASTM D3228-08R14

    Test Method for:Total Nitrogen in Lubricating Oils and Fuel Oils by Modified Kjeldahl Method
  • ASTM D3230-13

    Test Method for:Salts in Crude Oil (Electrometric Method)
  • ASTM D3231-13

    Test Method for:Phosphorus in Gasoline
  • ASTM D3233-93R14

    Test Methods for:Measurement of Extreme Pressure Properties of Fluid Lubricants (Falex Pin and Vee Block Methods)
  • ASTM D3235-15

    Test Method for:Solvent Extractables in Petroleum Waxes
  • ASTM D3236-15

    Test Method for:Apparent Viscosity of Hot Melt Adhesives and Coating Materials
  • ASTM D3237-12

    Test Method for:Lead in Gasoline by Atomic Absorption Spectroscopy
  • ASTM D3238-95R15

    Test Method for:Calculation of Carbon Distribution and Structural Group Analysis of Petroleum Oils by the n-d-M Method
  • ASTM D3239-91R11

    Test Method for:Aromatic Types Analysis of Gas-Oil Aromatic Fractions by High Ionizing Voltage Mass Spectrometry
  • ASTM D3240-15

    Test Method for:Undissolved Water In Aviation Turbine Fuels
  • ASTM D3241-15E02

    Test Method for:Thermal Oxidation Stability of Aviation Turbine Fuels
  • ASTM D3242-11

    Test Method for:Acidity in Aviation Turbine Fuel
  • ASTM D3244-12

    Practice for:Utilization of Test Data to Determine Conformance with Specifications
  • ASTM D3246-15

    Test Method for:Sulfur in Petroleum Gas by Oxidative Microcoulometry
  • ASTM D3336-05R15

    Test Method for:Life of Lubricating Greases in Ball Bearings at Elevated Temperatures
  • ASTM D3338_D3338M-09R14E02

    Test Method for:Estimation of Net Heat of Combustion of Aviation Fuels
  • ASTM D3339-12

    Test Method for:Acid Number of Petroleum Products by Semi-Micro Color Indicator Titration
  • ASTM D3340

    Test Method for:Lithium and Sodium in Lubricating Greases by Flame Photometer
  • ASTM D3341-05R11

    Test Method for:Lead in Gasoline—Iodine Monochloride Method
  • ASTM D3342-90R12

    Test Method for:Dispersion Stability of New (Unused) Rolling Oil Dispersions in Water
  • ASTM D3343-05R15

    Test Method for:Estimation of Hydrogen Content of Aviation Fuels
  • ASTM D3344-90R15

    Test Method for:Total  Wax  Content  of  Corrugated  Paperboard
  • ASTM D3348-12

    Test Method for:Rapid Field Test for Trace Lead in Unleaded Gasoline (Colorimetric Method)
  • ASTM D3427-15

    Test Method for:Air Release Properties of Hydrocarbon Based Oils
  • ASTM D3429-93R12

    Test Method for:Solubility of Fixed Gases in Low-Boiling Liquids
  • ASTM D3461-14

    Test Method for:Softening Point of Asphalt and Pitch (Mettler Cup-and-Ball Method)
  • ASTM D3519

    Test Method for:Foam in Aqueous Media (Blender Test)
  • ASTM D3521-86R12

    Test Method for:Surface Wax Coating On Corrugated Board
  • ASTM D3523-92R12

    Test Method for:Spontaneous Heating Values of Liquids and Solids (Differential Mackey Test)
  • ASTM D3524-14

    Test Method for:Diesel Fuel Diluent in Used Diesel Engine Oils by Gas Chromatography
  • ASTM D3525-04R10

    Test Method for:Gasoline Diluent in Used Gasoline Engine Oils by Gas Chromatography
  • ASTM D3527-15

    Test Method for:Life Performance of Automotive Wheel Bearing Grease
  • ASTM D3601

    Test Method for:Foam In Aqueous Media (Bottle Test)
  • ASTM D3603-14

    Test Method for:Rust-Preventing Characteristics of Steam Turbine Oil in the Presence of Water (Horizontal Disk Method)
  • ASTM D3605-00R11

    Test Method for:Trace Metals in Gas Turbine Fuels by Atomic Absorption and Flame Emission Spectroscopy
  • ASTM D3606-10

    Test Method for:Determination of Benzene and Toluene in Finished Motor and Aviation Gasoline by Gas Chromatography
  • ASTM D3607-08R12

    Test Method for:Removing Volatile Contaminants from Used Engine Oils by Stripping
  • ASTM D3699-13BE01

    Specification for:Kerosine
  • ASTM D3700-14

    Practice for:Obtaining LPG Samples Using a Floating Piston Cylinder
  • ASTM D3701-01R12

    Test Method for:Hydrogen Content of Aviation Turbine Fuels by Low Resolution Nuclear Magnetic Resonance Spectrometry
  • ASTM D3702-94R14

    Test Method for:Wear Rate and Coefficient of Friction of Materials in Self-Lubricated Rubbing Contact Using a Thrust Washer Testing Machine
  • ASTM D3703-13

    Test Method for:Hydroperoxide Number of Aviation Turbine Fuels, Gasoline and Diesel Fuels
  • ASTM D3704-96R12

    Test Method for:Wear Preventive Properties of Lubricating Greases Using the (Falex) Block on Ring Test Machine in Oscillating Motion
  • ASTM D3705-14

    Test Method for:Misting Properties of Lubricating Fluids
  • ASTM D3707-89R10

    Test Method for:Storage Stability of Water-in-Oil Emulsions by the Oven Test Method
  • ASTM D3708

    Test Method for:Weight of Wax Applied During Curtain Coating Operation
  • ASTM D3709-89R10

    Test Method for:Stability of Water-in-Oil Emulsions Under Low to Ambient Temperature Cycling Conditions
  • ASTM D3710

    Test Method for:Boiling Range Distribution of Gasoline and Gasoline Fractions by Gas Chromatography