한국표준정보망(KSSN)

ASTM Annual Book 수록 리스트

핸드북  >  ASTM

    05.02 : 석유제품 및 윤활유(Ⅱ) D3711-D6122

  • ASTM D3711-95R09

    Test Method for:Deposition Tendencies of Liquids in Thin Films and Vapors
  • ASTM D3712-05R11

    Test Method of:Analysis of Oil-Soluble Petroleum Sulfonates by Liquid Chromatography
  • ASTM D3764-15E01

    Practice for:Validation of the Performance of Process Stream Analyzer Systems
  • ASTM D3825-09

    Test Method for:Dynamic Surface Tension by the Fast-Bubble Technique
  • ASTM D3827-92R12

    Test Method for:Estimation of Solubility of Gases in Petroleum and Other Organic Liquids
  • ASTM D3828-12A

    Test Methods for:Flash Point by Small Scale Closed Cup Tester
  • ASTM D3829-14

    Test Method for:Predicting the Borderline Pumping Temperature of Engine Oil
  • ASTM D3831-12

    Test Method for:Manganese in Gasoline By Atomic Absorption Spectroscopy
  • ASTM D3944-12

    Test Method for:Solidification Point of Petroleum Wax
  • ASTM D3948-14

    Test Method for:Determining Water Separation Characteristics of Aviation Turbine Fuels by Portable Separometer
  • ASTM D4006-11R12E01

    Test Method for:Water in Crude Oil by Distillation
  • ASTM D4007-11E01

    Test Method for:Water and Sediment in Crude Oil by the Centrifuge Method (Laboratory Procedure)
  • ASTM D4042-93R14

    Test Method for:Sampling and Testing for Ash and Total Iron in Steel Mill Dispersions of Rolling Oils
  • ASTM D4045-15

    Test Method for:Sulfur in Petroleum Products by Hydrogenolysis and Rateometric Colorimetry
  • ASTM D4046-14

    Test Method for:Alkyl Nitrate in Diesel Fuels by Spectrophotometry
  • ASTM D4047-13

    Test Method for:Phosphorus in Lubricating Oils and Additives by Quinoline Phosphomolybdate Method
  • ASTM D4048-10

    Test Method for:Detection of Copper Corrosion from Lubricating Grease
  • ASTM D4049-06R11

    Test Method for:Determining the Resistance of Lubricating Grease to Water Spray
  • ASTM D4051-10R15

    Practice for:Preparation of Low-Pressure Gas Blends
  • ASTM D4052-11

    Test Method for:Density, Relative Density, and API Gravity of Liquids by Digital Density Meter
  • ASTM D4053

    Test Method for:Benzene in Motor and Aviation Gasoline by Infrared Spectroscopy
  • ASTM D4054-14

    Practice for:Qualification and Approval of New Aviation Turbine Fuels and Fuel Additives
  • ASTM D4055-04R13

    Test Method for:Pentane Insolubles by Membrane Filtration
  • ASTM D4056-01R10

    Test Method for:Estimation of Solubility of Water in Hydrocarbon and Aliphatic Ester Lubricants
  • ASTM D4057-12

    Practice for:Manual Sampling of Petroleum and Petroleum Products
  • ASTM D4072-98R13

    Test Method for:Toluene-Insoluble (TI) Content of Tar and Pitch
  • ASTM D4170-10

    Test Method for:Fretting Wear Protection by Lubricating Greases
  • ASTM D4171-11

    Specification for:Fuel System Icing Inhibitors
  • ASTM D4172-94R10

    Test Method for:Wear Preventive Characteristics of Lubricating Fluid (Four-Ball Method)
  • ASTM D4174-15

    Practice for:Cleaning, Flushing, and Purification of Petroleum Fluid Hydraulic Systems
  • ASTM D4175-15C

    Terminology Relating to:Petroleum, Petroleum Products, and Lubricants
  • ASTM D4176-04R14

    Test Method for:Free Water and Particulate Contamination in Distillate Fuels (Visual Inspection Procedures)
  • ASTM D4177-15A

    Practice for:Automatic Sampling of Petroleum and Petroleum Products
  • ASTM D4178-82R12

    Practice for:Calibrating Moisture Analyzers
  • ASTM D4289-13R14E01

    Test Method for:Elastomer Compatibility of Lubricating Greases and Fluids
  • ASTM D4290-15

    Test Method for:Determining the Leakage Tendencies of Automotive Wheel Bearing Grease Under Accelerated Conditions
  • ASTM D4291-04R13

    Test Method for:Trace Ethylene Glycol in Used Engine Oil
  • ASTM D4292-10

    Test Method for:Determination of Vibrated Bulk Density of Calcined Petroleum Coke
  • ASTM D4293-15

    Specification for:Phosphate Ester Based Fluids for Turbine Lubrication and Steam Turbine Electro-Hydraulic Control (EHC) Applications
  • ASTM D4294-10

    Test Method for:Sulfur in Petroleum and Petroleum Products by Energy Dispersive X-ray Fluorescence Spectrometry
  • ASTM D4296-83R15E01

    Practice for:Sampling Pitch
  • ASTM D4304-13

    Specification for:Mineral and Synthetic Lubricating Oil Used in Steam or Gas Turbines
  • ASTM D4306-15

    Practice for:Aviation Fuel Sample Containers for Tests Affected by Trace Contamination
  • ASTM D4307-99R15

    Practice for:Preparation of Liquid Blends for Use as Analytical Standards
  • ASTM D4308-13

    Test Method for:Electrical Conductivity of Liquid Hydrocarbons by Precision Meter
  • ASTM D4310-10R15

    Test Method for:Determination of Sludging and Corrosion Tendencies of Inhibited Mineral Oils
  • ASTM D4312-15

    Test Method for:Toluene-Insoluble (TI) Content of Tar and Pitch (Short Method)
  • ASTM D4377-00R11

    Test Method for:Water in Crude Oils by Potentiometric Karl Fischer Titration
  • ASTM D4378-13

    Practice for:In-Service Monitoring of Mineral Turbine Oils for Steam, Gas, and Combined Cycle Turbines
  • ASTM D4418-00R11

    Practice for:Receipt, Storage, and Handling of Fuels for Gas Turbines
  • ASTM D4419-90R15

    Test Method for:Measurement of Transition Temperatures of Petroleum Waxes by Differential Scanning Calorimetry (DSC)
  • ASTM D4422-13

    Test Method for:Ash in Analysis of Petroleum Coke
  • ASTM D4423-10R15

    Test Method for:Determination of Carbonyls in C4 Hydrocarbons
  • ASTM D4424-09R14

    Test Method for:Butylene Analysis by Gas Chromatography
  • ASTM D4425-09R14

    Test Method for:Oil Separation from Lubricating Grease by Centrifuging (Koppers Method)
  • ASTM D4485-15A

    Specification for:Performance of Active API Service Category Engine Oils
  • ASTM D4486-10

    Test Method for:Kinematic Viscosity of Volatile and Reactive Liquids
  • ASTM D4529-01R11

    Test Method for:Estimation of Net Heat of Combustion of Aviation Fuels
  • ASTM D4530-15

    Test Method for:Determination of Carbon Residue (Micro Method)
  • ASTM D4539-10

    Test Method for:Filterability of Diesel Fuels by Low-Temperature Flow Test (LTFT)
  • ASTM D4616-95R13

    Test Method for:Microscopical Analysis by Reflected Light and Determination of Mesophase in a Pitch
  • ASTM D4625-14

    Test Method for:Middle Distillate Fuel Storage Stability at 43 °C (110 °F)
  • ASTM D4626-95R15

    Practice for:Calculation of Gas Chromatographic Response Factors
  • ASTM D4627-12

    Test Method for:Iron Chip Corrosion for Water–Miscible Metalworking Fluids
  • ASTM D4628-14

    Test Method for:Analysis of Barium, Calcium, Magnesium, and Zinc in Unused Lubricating Oils by Atomic Absorption Spectrometry
  • ASTM D4629-12

    Test Method for:Trace Nitrogen in Liquid Petroleum Hydrocarbons by Syringe/Inlet Oxidative Combustion and Chemiluminescence Detection
  • ASTM D4636-14

    Test Method for:Corrosiveness and Oxidation Stability of Hydraulic Oils, Aircraft Turbine Engine Lubricants, and Other Highly Refined Oils
  • ASTM D4682-13

    Specification for:Miscibility with Gasoline and Fluidity of Two-Stroke-Cycle Gasoline Engine Lubricants
  • ASTM D4683-13

    Test Method for:Measuring Viscosity of New and Used Engine Oils at High Shear Rate and High Temperature by Tapered Bearing Simulator Viscometer at 150 °C
  • ASTM D4684-14

    Test Method for:Determination of Yield Stress and Apparent Viscosity of Engine Oils at Low Temperature
  • ASTM D4693-07R12

    Test Method for:Low-Temperature Torque of Grease-Lubricated Wheel Bearings
  • ASTM D4715-98R12

    Test Method for:Coking Value of Tar and Pitch (Alcan)
  • ASTM D4737-10

    Test Method for:Calculated Cetane Index by Four Variable Equation
  • ASTM D4739-11

    Test Method for:Base Number Determination by Potentiometric Hydrochloric Acid Titration
  • ASTM D4740-04R14

    Test Method for:Cleanliness and Compatibility of Residual Fuels by Spot Test
  • ASTM D4741-13

    Test Method for:Measuring Viscosity at High Temperature and High Shear Rate by Tapered-Plug Viscometer
  • ASTM D4742-08E01

    Test Method for:Oxidation Stability of Gasoline Automotive Engine Oils by Thin-Film Oxygen Uptake (TFOUT)
  • ASTM D4746-14E01

    Test Method for:Determination of Quinoline Insolubles (QI) in Tar and Pitch by Pressure Filtration
  • ASTM D4806-15

    Specification for:Denatured Fuel Ethanol for Blending with Gasolines for Use as Automotive Spark-Ignition Engine Fuel
  • ASTM D4807-05R15

    Test Method for:Sediment in Crude Oil by Membrane Filtration
  • ASTM D4808-01R12

    Test Methods for:Hydrogen Content of Light Distillates, Middle Distillates, Gas Oils, and Residua by Low-Resolution Nuclear Magnetic Resonance Spectroscopy
  • ASTM D4809-13

    Test Method for:Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter (Precision Method)
  • ASTM D4814-15A

    Specification for:Automotive Spark-Ignition Engine Fuel
  • ASTM D4815-15B

    Test Method for:Determination of MTBE, ETBE, TAME, DIPE, tertiary-Amyl Alcohol and C1 to C4 Alcohols in Gasoline by Gas Chromatography
  • ASTM D4857-12

    Test Method for:Determination of the Ability of Lubricants to Minimize Ring Sticking and Piston Deposits in Two-Stroke-Cycle Gasoline Engines Other Than Outboards
  • ASTM D4858-13

    Test Method for:Determination of the Tendency of Lubricants to Promote Preignition in Two-Stroke-Cycle Gasoline Engines
  • ASTM D4859-13

    Specification for:Lubricants for Two-Stroke-Cycle Spark-Ignition Gasoline Engines-TC
  • ASTM D4860-14

    Test Method for:Free Water and Particulate Contamination in Middle Distillate Fuels (Clear and Bright Numerical Rating)
  • ASTM D4863-13

    Test Method for:Determination of Lubricity of Two-Stroke-Cycle Gasoline Engine Lubricants
  • ASTM D4864-14

    Test Method for:Determination of Traces of Methanol in Propylene Concentrates by Gas Chromatography
  • ASTM D4865-09R14

    Guide for:Generation and Dissipation of Static Electricity in Petroleum Fuel Systems
  • ASTM D4868-00R10

    Test Method for:Estimation of Net and Gross Heat of Combustion of Burner and Diesel Fuels
  • ASTM D4870-09R14

    Test Method for:Determination of Total Sediment in Residual Fuels
  • ASTM D4871-11

    Guide for:Universal Oxidation/Thermal Stability Test Apparatus
  • ASTM D4892-14

    Test Method for:Density of Solid Pitch (Helium Pycnometer Method)
  • ASTM D4893-94R15E01

    Test Method for:Determination of Pitch Volatility
  • ASTM D4898-90R10E01

    Test Method for:Insoluble Contamination of Hydraulic Fluids by Gravimetric Analysis
  • ASTM D4927-15

    Test Methods for:Elemental Analysis of Lubricant and Additive Components—Barium, Calcium, Phosphorus, Sulfur, and Zinc by Wavelength-Dispersive X-Ray Fluorescence Spectroscopy
  • ASTM D4928-12

    Test Method for:Water in Crude Oils by Coulometric Karl Fischer Titration
  • ASTM D4929-15A

    Test Methods for:Determination of Organic Chloride Content in Crude Oil
  • ASTM D4930-06R11

    Test Method for:Dust Control Material on Calcined Petroleum Coke
  • ASTM D4931-06R11

    Test Method for:Gross Moisture in Green Petroleum Coke
  • ASTM D4950-14

    Classification and Specification for:Automotive Service Greases
  • ASTM D4951-14

    Test Method for:Determination of Additive Elements in Lubricating Oils by Inductively Coupled Plasma Atomic Emission Spectrometry
  • ASTM D4952-12

    Test Method for:Qualitative Analysis for Active Sulfur Species in Fuels and Solvents (Doctor Test)
  • ASTM D4953-15

    Test Method for:Vapor Pressure of Gasoline and Gasoline-Oxygenate Blends (Dry Method)
  • ASTM D4998-13

    Test Method for:Evaluating Wear Characteristics of Tractor Hydraulic Fluids
  • ASTM D5000

    Practice for:Evaluating Activity of Clay Elements Using a Side-Stream Sensor
  • ASTM D5001-10R14

    Test Method for:Measurement of Lubricity of Aviation Turbine Fuels by the Ball-on-Cylinder Lubricity Evaluator (BOCLE)
  • ASTM D5002-13

    Test Method for:Density and Relative Density of Crude Oils by Digital Density Analyzer
  • ASTM D5003-06AR11

    Test Method for:Hardgrove Grindability Index (HGI) of Petroleum Coke
  • ASTM D5004-11

    Test Method for:Real Density of Calcined Petroleum Coke by Xylene Displacement
  • ASTM D5006-11

    Test Method for:Measurement of Fuel System Icing Inhibitors (Ether Type) in Aviation Fuels
  • ASTM D5018-89R15E01

    Test Method for:Shear Viscosity of Coal-Tar and Petroleum Pitches
  • ASTM D5056-15

    Test Method for:Trace Metals in Petroleum Coke by Atomic Absorption
  • ASTM D5059-14

    Test Methods for:Lead in Gasoline by X-Ray Spectroscopy
  • ASTM D5133-15

    Test Method for:Low Temperature, Low Shear Rate, Viscosity/Temperature Dependence of Lubricating Oils Using a Temperature-Scanning Technique
  • ASTM D5134-13

    Test Method for:Detailed Analysis of Petroleum Naphthas through n-Nonane by Capillary Gas Chromatography
  • ASTM D5182-97R14

    Test Method for:Evaluating the Scuffing Load Capacity of Oils (FZG Visual Method)
  • ASTM D5183-05R11

    Test Method for:Determination of the Coefficient of Friction of Lubricants Using the Four-Ball Wear Test Machine
  • ASTM D5184-12

    Test Methods for:Determination of Aluminum and Silicon in Fuel Oils by Ashing, Fusion, Inductively Coupled Plasma Atomic Emission Spectrometry, and Atomic Absorption Spectrometry
  • ASTM D5185-13E01

    Test Method for:Multielement Determination of Used and Unused Lubricating Oils and Base Oils by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)
  • ASTM D5186-15

    Test Method for:Determination of the Aromatic Content and Polynuclear Aromatic Content of Diesel Fuels and Aviation Turbine Fuels By Supercritical Fluid Chromatography
  • ASTM D5187-10R15E01

    Test Method for:Determination of Crystallite Size (Lc) of Calcined Petroleum Coke by X-Ray Diffraction
  • ASTM D5188-14

    Test Method for:Vapor-Liquid Ratio Temperature Determination of Fuels (Evacuated Chamber and Piston Based Method)
  • ASTM D5191-15

    Test Method for:Vapor Pressure of Petroleum Products (Mini Method)
  • ASTM D5234-92R12

    Guide for:Analysis of Ethylene Product
  • ASTM D5236-13

    Test Method for:Distillation of Heavy Hydrocarbon Mixtures (Vacuum Potstill Method)
  • ASTM D5273-92R12

    Guide for:Analysis of Propylene Concentrates
  • ASTM D5274-00R14

    Guide for:Analysis of 1,3–Butadiene Product
  • ASTM D5275-11

    Test Method for:Fuel Injector Shear Stability Test (FISST) for Polymer Containing Fluids
  • ASTM D5291-10R15

    Test Methods for:Instrumental Determination of Carbon, Hydrogen, and Nitrogen in Petroleum Products and Lubricants
  • ASTM D5292-99R14

    Test Method for:Aromatic Carbon Contents of Hydrocarbon Oils by High Resolution Nuclear Magnetic Resonance Spectroscopy
  • ASTM D5293-15

    Test Method for:Apparent Viscosity of Engine Oils and Base Stocks Between –10 °C and –35 °C Using Cold-Cranking Simulator
  • ASTM D5303-92R12

    Test Method for:Trace Carbonyl Sulfide in Propylene by Gas Chromatography
  • ASTM D5304-15

    Test Method for:Assessing Middle Distillate Fuel Storage Stability by Oxygen Overpressure
  • ASTM D5305-12

    Test Method for:Determination of Ethyl Mercaptan in LP-Gas Vapor
  • ASTM D5306-92R13

    Test Method for:Linear Flame Propagation Rate of Lubricating Oils and Hydraulic Fluids
  • ASTM D5372-04R14

    Guide for:Evaluation of Hydrocarbon Heat Transfer Fluids
  • ASTM D5384-14

    Test Methods for:Chlorine in Used Petroleum Products (Field Test Kit Method)
  • ASTM D5441-98R13

    Test Method for:Analysis of Methyl Tert-Butyl Ether (MTBE) by Gas Chromatography
  • ASTM D5442-93R13

    Test Method for:Analysis of Petroleum Waxes by Gas Chromatography
  • ASTM D5443-14

    Test Method for:Paraffin, Naphthene, and Aromatic Hydrocarbon Type Analysis in Petroleum Distillates Through 200 °C by Multi-Dimensional Gas Chromatography
  • ASTM D5452-12

    Test Method for:Particulate Contamination in Aviation Fuels by Laboratory Filtration
  • ASTM D5453-12

    Test Method for:Determination of Total Sulfur in Light Hydrocarbons, Spark Ignition Engine Fuel, Diesel Engine Fuel, and Engine Oil by Ultraviolet Fluorescence
  • ASTM D5481-13

    Test Method for:Measuring Apparent Viscosity at High-Temperature and High-Shear Rate by Multicell Capillary Viscometer
  • ASTM D5482-07R13

    Test Method for:Vapor Pressure of Petroleum Products (Mini Method—Atmospheric)
  • ASTM D5483-05R15

    Test Method for:Oxidation Induction Time of Lubricating Greases by Pressure Differential Scanning Calorimetry
  • ASTM D5500-98R14

    Test Method for:Vehicle Evaluation of Unleaded Automotive Spark-Ignition Engine Fuel for Intake Valve Deposit Formation
  • ASTM D5501-12E01

    Test Method for:Determination of Ethanol and Methanol Content in Fuels Containing Greater than 20% Ethanol by Gas Chromatography
  • ASTM D5502-00R15

    Test Method for:Apparent Density by Physical Measurements of Manufactured Anode and Cathode Carbon Used by the Aluminum Industry
  • ASTM D5534-94R11E01

    Test Method for:Vapor-Phase Rust-Preventing Characteristics of Hydraulic Fluids
  • ASTM D5579-15

    Test Method for:Evaluating the Thermal Stability of Manual Transmission Lubricants in a Cyclic Durability Test
  • ASTM D5580-15

    Test Method for:Determination of Benzene, Toluene, Ethylbenzene, p/m-Xylene, o-Xylene, C9 and Heavier Aromatics, and Total Aromatics in Finished Gasoline by Gas Chromatography
  • ASTM D5598-01R12

    Test Method for:Evaluating Unleaded Automotive Spark-Ignition Engine Fuel for Electronic Port Fuel Injector Fouling
  • ASTM D5599-15

    Test Method for:Determination of Oxygenates in Gasoline by Gas Chromatography and Oxygen Selective Flame Ionization Detection
  • ASTM D5600-14

    Test Method for:Trace Metals in Petroleum Coke by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)
  • ASTM D5619-00R11

    Test Method for:Comparing Metal Removal Fluids Using the Tapping Torque Test Machine
  • ASTM D5621-07R13

    Test Method for:Sonic Shear Stability of Hydraulic Fluids
  • ASTM D5622-95R11

    Test Methods for:Determination of Total Oxygen in Gasoline and Methanol Fuels by Reductive Pyrolysis
  • ASTM D5623-94R14

    Test Method for:Sulfur Compounds in Light Petroleum Liquids by Gas Chromatography and Sulfur Selective Detection
  • ASTM D5662-14

    Test Method for:Determining Automotive Gear Oil Compatibility with Typical Oil Seal Elastomers
  • ASTM D5704-15A

    Test Method for:Evaluation of the Thermal and Oxidative Stability of Lubricating Oils Used for Manual Transmissions and Final Drive Axles
  • ASTM D5705-15

    Test Method for:Measurement of Hydrogen Sulfide in the Vapor Phase Above Residual Fuel Oils
  • ASTM D5706-11

    Test Method for:Determining Extreme Pressure Properties of Lubricating Greases Using a High-Frequency, Linear-Oscillation (SRV) Test Machine
  • ASTM D5707-11

    Test Method for:Measuring Friction and Wear Properties of Lubricating Grease Using a High-Frequency, Linear-Oscillation (SRV) Test Machine
  • ASTM D5708-15

    Test Methods for:Determination of Nickel, Vanadium, and Iron in Crude Oils and Residual Fuels by Inductively Coupled Plasma (ICP) Atomic Emission Spectrometry
  • ASTM D5709-09R15

    Test Method for:Sieve Analysis of Petroleum Coke
  • ASTM D5760-13

    Specification for:Performance of Manual Transmission Gear Lubricants
  • ASTM D5761-96R12

    Practice for:Emulsification/Suspension of Multiphase Fluid Waste Materials
  • ASTM D5762-12

    Test Method for:Nitrogen in Petroleum and Petroleum Products by Boat-Inlet Chemiluminescence
  • ASTM D5763-11

    Test Method for:Oxidation and Thermal Stability Characteristics of Gear Oils Using Universal Glassware
  • ASTM D5769-15

    Test Method for:Determination of Benzene, Toluene, and Total Aromatics in Finished Gasolines by Gas Chromatography/Mass Spectrometry
  • ASTM D5770-11

    Test Method for:Semiquantitative Micro Determination of Acid Number of Lubricating Oils During Oxidation Testing
  • ASTM D5771-15

    Test Method for:Cloud Point of Petroleum Products (Optical Detection Stepped Cooling Method)
  • ASTM D5772-15

    Test Method for:Cloud Point of Petroleum Products (Linear Cooling Rate Method)
  • ASTM D5773-15

    Test Method for:Cloud Point of Petroleum Products (Constant Cooling Rate Method)
  • ASTM D5797-15

    Specification for:Fuel Methanol (M70-M85) for Automotive Spark-Ignition Engines
  • ASTM D5798-15

    Specification for:Ethanol Fuel Blends for Flexible-Fuel Automotive Spark-Ignition Engines
  • ASTM D5799-95R14

    Test Method for:Determination of Peroxides in Butadiene
  • ASTM D5800-15A

    Test Method for:Evaporation Loss of Lubricating Oils by the Noack Method
  • ASTM D5842-14

    Practice for:Sampling and Handling of Fuels for Volatility Measurement
  • ASTM D5845-01R11

    Test Method for:Determination of MTBE, ETBE, TAME, DIPE, Methanol, Ethanol and tert-Butanol in Gasoline by Infrared Spectroscopy
  • ASTM D5846-07R12

    Test Method for:Universal Oxidation Test for Hydraulic and Turbine Oils Using the Universal Oxidation Test Apparatus
  • ASTM D5853-11

    Test Method for:Pour Point of Crude Oils
  • ASTM D5854-96R15

    Practice for:Mixing and Handling of Liquid Samples of Petroleum and Petroleum Products
  • ASTM D5863-00AR11

    Test Methods for:Determination of Nickel, Vanadium, Iron, and Sodium in Crude Oils and Residual Fuels by Flame Atomic Absorption Spectrometry
  • ASTM D5864-11

    Test Method for:Determining Aerobic Aquatic Biodegradation of Lubricants or Their Components
  • ASTM D5949-14

    Test Method for:Pour Point of Petroleum Products (Automatic Pressure Pulsing Method)
  • ASTM D5950-14

    Test Method for:Pour Point of Petroleum Products (Automatic Tilt Method)
  • ASTM D5966-13

    Test Method for:Evaluation of Engine Oils for Roller Follower Wear in Light-Duty Diesel Engine
  • ASTM D5967-15A

    Test Method for:Evaluation of Diesel Engine Oils in T-8 Diesel Engine
  • ASTM D5968-14

    Test Method for:Evaluation of Corrosiveness of Diesel Engine Oil at 121 °C
  • ASTM D5969-11E01

    Test Method for:Corrosion-Preventive Properties of Lubricating Greases in Presence of Dilute Synthetic Sea Water Environments
  • ASTM D5972-15

    Test Method for:Freezing Point of Aviation Fuels (Automatic Phase Transition Method)
  • ASTM D5983-15

    Specification for:Methyl Tertiary-Butyl Ether (MTBE) for Downstream Blending for Use in Automotive Spark-Ignition Engine Fuel
  • ASTM D5984-11

    Test Method for:Semi-Quantitative Field Test Method for Base Number in New and Used Lubricants by Color-Indicator Titration
  • ASTM D5985-02R14

    Test Method for:Pour Point of Petroleum Products (Rotational Method)
  • ASTM D5986-96R15

    Test Method for:Determination of Oxygenates, Benzene, Toluene, C8–C 12 Aromatics and Total Aromatics in Finished Gasoline by Gas Chromatography/Fourier Transform Infrared Spectroscopy
  • ASTM D6006-11

    Guide for:Assessing Biodegradability of Hydraulic Fluids
  • ASTM D6021-12

    Test Method for:Measurement of Total Hydrogen Sulfide in Residual Fuels by Multiple Headspace Extraction and Sulfur Specific Detection
  • ASTM D6022-06R12

    Practice for:Calculation of Permanent Shear Stability Index
  • ASTM D6045-12

    Test Method for:Color of Petroleum Products by the Automatic Tristimulus Method
  • ASTM D6046-02R12

    Classification of:Hydraulic Fluids for Environmental Impact
  • ASTM D6074-15

    Guide for:Characterizing Hydrocarbon Lubricant Base Oils
  • ASTM D6078-04R10

    Test Method for:Evaluating Lubricity of Diesel Fuels by the Scuffing Load Ball-on-Cylinder Lubricity Evaluator (SLBOCLE)
  • ASTM D6079-11

    Test Method for:Evaluating Lubricity of Diesel Fuels by the High-Frequency Reciprocating Rig (HFRR)
  • ASTM D6080-12A

    Practice for:Defining the Viscosity Characteristics of Hydraulic Fluids
  • ASTM D6081-98R14

    Practice for:Aquatic Toxicity Testing of Lubricants: Sample Preparation and Results Interpretation
  • ASTM D6082-12

    Test Method for:High Temperature Foaming Characteristics of Lubricating Oils
  • ASTM D6120-97R12

    Test Method for:Electrical Resistivity of Anode and Cathode Carbon Material at Room Temperature
  • ASTM D6121-15A

    Test Method for:Evaluation of Load-Carrying Capacity of Lubricants Under Conditions of Low Speed and High Torque Used for Final Hypoid Drive Axles
  • ASTM D6122-13

    Practice for:Validation of the Performance of Multivariate Online, At-Line, and Laboratory Infrared Spectrophotometer Based Analyzer Systems