ASTM Annual Book 수록 리스트

핸드북  >  ASTM

05.03 : 석유제품 및 윤활유 (Ⅲ) (D6138 ~ D6971)

• ASTM D6138-13

  Test Method for:Determination of Corrosion-Preventive Properties of Lubricating Greases Under Dynamic Wet Conditions (Emcor Test)

• ASTM D6139-11

  Test Method for:Determining the Aerobic Aquatic Biodegradation of Lubricants or Their Components Using the Gledhill Shake Flask

• ASTM D6158-14

  Specification for:Mineral Hydraulic Oils

• ASTM D6159-97R12

  Test Method for:Determination of Hydrocarbon Impurities in Ethylene by Gas Chromatography

• ASTM D6160-98R13

  Test Method for:Determination of Polychlorinated Biphenyls (PCBs) in Waste Materials by Gas Chromatography

• ASTM D6184-14

  Test Method for:Oil Separation from Lubricating Grease (Conical Sieve Method)

• ASTM D6185-11

  Practice for:Evaluating Compatibility of Binary Mixtures of Lubricating Greases

• ASTM D6186-08R13

  Test Method for:Oxidation Induction Time of Lubricating Oils by Pressure Differential Scanning Calorimetry (PDSC)

• ASTM D6200-01R12

  Test Method for:Determination of Cooling Characteristics of Quench Oils by Cooling Curve Analysis

• ASTM D6201-04R14

  Test Method for:Dynamometer Evaluation of Unleaded Spark-Ignition Engine Fuel for Intake Valve Deposit Formation

• ASTM D6203-06R12

  Test Method for:Thermal Stability of Way Lubricants

• ASTM D6217-11

  Test Method for:Particulate Contamination in Middle Distillate Fuels by Laboratory Filtration

• ASTM D6224-09

  Practice for:In-Service Monitoring of Lubricating Oil for Auxiliary Power Plant Equipment

• ASTM D6227-14

  Specification for:Unleaded Aviation Gasoline Containing a Non-hydrocarbon Component

• ASTM D6258-09R14

  Test Method for:Determination of Solvent Red 164 Dye Concentration in Diesel Fuels

• ASTM D6259-15

  Practice for:Determination of a Pooled Limit of Quantitation for a Test Method

• ASTM D6277-07R12

  Test Method for:Determination of Benzene in Spark-Ignition Engine Fuels Using Mid Infrared Spectroscopy

• ASTM D6278-12E01

  Test Method for:Shear Stability of Polymer Containing Fluids Using a European Diesel Injector Apparatus

• ASTM D6296-98R13

  Test Method for:Total Olefins in Spark-ignition Engine Fuels by Multidimensional Gas Chromatography

• ASTM D6299-13E01

  Practice for:Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance

• ASTM D6300-15

  Practice for:Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products and Lubricants

• ASTM D6304-07

  Test Method for:Determination of Water in Petroleum Products, Lubricating Oils, and Additives by Coulometric Karl Fischer Titration

• ASTM D6334-12

  Test Method for:Sulfur in Gasoline by Wavelength Dispersive X-Ray Fluorescence

• ASTM D6335-09

  Test Method for:Determination of High Temperature Deposits by Thermo-Oxidation Engine Oil Simulation Test

• ASTM D6351-10

  Test Method for:Determination of Low Temperature Fluidity and Appearance of Hydraulic Fluids

• ASTM D6352-15

  Test Method for:Boiling Range Distribution of Petroleum Distillates in Boiling Range from 174 °C to 700 °C by Gas Chromatography

• ASTM D6353-06R11

  Guide for:Sampling Plan and Core Sampling for Prebaked Anodes Used in Aluminum Production

• ASTM D6354-12

  Guide for:Sampling Plan and Core Sampling of Carbon Cathode Blocks Used in Aluminum Production

• ASTM D6371-05R10

  Test Method for:Cold Filter Plugging Point of Diesel and Heating Fuels

• ASTM D6374-12

  Test Method for:Volatile Matter in Green Petroleum Coke Quartz Crucible Procedure

• ASTM D6375-09R14

  Test Method for:Evaporation Loss of Lubricating Oils by Thermogravimetric Analyzer (TGA) Noack Method

• ASTM D6376-10

  Test Method for:Determination of Trace Metals in Petroleum Coke by Wavelength Dispersive X-ray Fluorescence Spectroscopy

• ASTM D6377-15

  Test Method for:Determination of Vapor Pressure of Crude Oil: VPCRx (Expansion Method)

• ASTM D6378-10

  Test Method for:Determination of Vapor Pressure (VPX) of Petroleum Products, Hydrocarbons, and Hydrocarbon-Oxygenate Mixtures (Triple Expansion Method)

• ASTM D6379-11

  Test Method for:Determination of Aromatic Hydrocarbon Types in Aviation Fuels and Petroleum Distillates—High Performance Liquid Chromatography Method with Refractive Index Detection

• ASTM D6384-11

  Terminology Relating to:Biodegradability and Ecotoxicity of Lubricants

• ASTM D6417-15

  Test Method for:Estimation of Engine Oil Volatility by Capillary Gas Chromatography

• ASTM D6421-99AR14

  Test Method for:Evaluating Automotive Spark-Ignition Engine Fuel for Electronic Port Fuel Injector Fouling by Bench Procedure

• ASTM D6423-14

  Test Method for:Determination of pHe of Denatured Fuel Ethanol and Ethanol Fuel Blends

• ASTM D6424-04AR14

  Practice for:Octane Rating Naturally Aspirated Spark Ignition Aircraft Engines

• ASTM D6425-11

  Test Method for:Measuring Friction and Wear Properties of Extreme Pressure (EP) Lubricating Oils Using SRV Test Machine

• ASTM D6426-13

  Test Method for:Determining Filterability of Middle Distillate Fuel Oils

• ASTM D6439-11

  Guide for:Cleaning, Flushing, and Purification of Steam, Gas, and Hydroelectric Turbine Lubrication Systems

• ASTM D6443-14

  Test Method for:Determination of Calcium, Chlorine, Copper, Magnesium, Phosphorus, Sulfur, and Zinc in Unused Lubricating Oils and Additives by Wavelength Dispersive X-ray Fluorescence Spectrometry (Mathematical Correction Procedure)

• ASTM D6447-09R14

  Test Method for:Hydroperoxide Number of Aviation Turbine Fuels by Voltammetric Analysis

• ASTM D6448-14E01

  Specification for:Industrial Burner Fuels from Used Lubricating Oils

• ASTM D6450-12E01

  Test Method for:Flash Point by Continuously Closed Cup (CCCFP) Tester

• ASTM D6468-08R13

  Test Method for:High Temperature Stability of Middle Distillate Fuels

• ASTM D6469-14

  Guide for:Microbial Contamination in Fuels and Fuel Systems

• ASTM D6470-99R15

  Test Method for:Salt in Crude Oils (Potentiometric Method)

• ASTM D6481-14

  Test Method for:Determination of Phosphorus, Sulfur, Calcium, and Zinc in Lubrication Oils by Energy Dispersive X-ray Fluorescence Spectroscopy

• ASTM D6482-06R11

  Test Method for:Determination of Cooling Characteristics of Aqueous Polymer Quenchants by Cooling Curve Analysis with Agitation (Tensi Method)

• ASTM D6514-03R14

  Test Method for:High Temperature Universal Oxidation Test for Turbine Oils

• ASTM D6546-00R10

  Test Methods for:and Suggested Limits for Determining Compatibility of Elastomer Seals for Industrial Hydraulic Fluid Applications

• ASTM D6547-00R10

  Test Method for:Corrosiveness of Lubricating Fluid to Bimetallic Couple

• ASTM D6549-06R15

  Test Method for:Determination of Cooling Characteristics of Quenchants by Cooling Curve Analysis with Agitation (Drayton Unit)

• ASTM D6550-15

  Test Method for:Determination of Olefin Content of Gasolines by Supercritical-Fluid Chromatography

• ASTM D6553-00R10

  Test Method for:Coolant Compatibility of Way Lubricants

• ASTM D6557-13

  Test Method for:Evaluation of Rust Preventive Characteristics of Automotive Engine Oils

• ASTM D6558-00AR15E01

  Test Method for:Determination of TGA CO2 Reactivity of Baked Carbon Anodes and Cathode Blocks

• ASTM D6559-00AR10

  Test Method for:Determination of Thermogravimetric (TGA) Air Reactivity of Baked Carbon Anodes and Cathode Blocks

• ASTM D6560-12

  Test Method for:Determination of Asphaltenes (Heptane Insolubles) in Crude Petroleum and Petroleum Products

• ASTM D6584-13E01

  Test Method for:Determination of Total Monoglycerides, Total Diglycerides, Total Triglycerides, and Free and Total Glycerin in B-100 Biodiesel Methyl Esters by Gas Chromatography

• ASTM D6591-11

  Test Method for:Determination of Aromatic Hydrocarbon Types in Middle Distillates—High Performance Liquid Chromatography Method with Refractive Index Detection

• ASTM D6593-15A

  Test Method for:Evaluation of Automotive Engine Oils for Inhibition of Deposit Formation in a Spark-Ignition Internal Combustion Engine Fueled with Gasoline and Operated Under Low-Temperature, Light-Duty Conditions

• ASTM D6594-14

  Test Method for:Evaluation of Corrosiveness of Diesel Engine Oil at 135 °C

• ASTM D6595-00R11

  Test Method for:Determination of Wear Metals and Contaminants in Used Lubricating Oils or Used Hydraulic Fluids by Rotating Disc Electrode Atomic Emission Spectrometry

• ASTM D6596-00R11

  Practice for:Ampulization and Storage of Gasoline and Related Hydrocarbon Materials

• ASTM D6615-15A

  Specification for:Jet B Wide-Cut Aviation Turbine Fuel

• ASTM D6616-07R12

  Test Method for:Measuring Viscosity at High Shear Rate by Tapered Bearing Simulator Viscometer at 100°C

• ASTM D6617-13

  Practice for:Laboratory Bias Detection Using Single Test Result from Standard Material

• ASTM D6618-14

  Test Method for:Evaluation of Engine Oils in Diesel Four-Stroke Cycle Supercharged 1M-PC Single Cylinder Oil Test Engine

• ASTM D6624-14

  Practice for:Determining a Flow-Proportioned Average Property Value (FPAPV) for a Collected Batch of Process Stream Material Using Stream Analyzer Data

• ASTM D6666-04R14

  Guide for:Evaluation of Aqueous Polymer Quenchants

• ASTM D6667-14

  Test Method for:Determination of Total Volatile Sulfur in Gaseous Hydrocarbons and Liquefied Petroleum Gases by Ultraviolet Fluorescence

• ASTM D6668-01R10

  Test Method for:Discrimination Between Flammability Ratings of F = 0 and F = 1

• ASTM D6681-15

  Test Method for:Evaluation of Engine Oils in a High Speed, Single-Cylinder Diesel Engine—Caterpillar 1P Test Procedure

• ASTM D6708-15

  Practice for:Statistical Assessment and Improvement of Expected Agreement Between Two Test Methods that Purport to Measure the Same Property of a Material

• ASTM D6709-15A

  Test Method for:Evaluation of Automotive Engine Oils in the Sequence VIII Spark-Ignition Engine (CLR Oil Test Engine)

• ASTM D6710-02R12

  Guide for:Evaluation of Hydrocarbon-Based Quench Oil

• ASTM D6728-11

  Test Method for:Determination of Contaminants in Gas Turbine and Diesel Engine Fuel by Rotating Disc Electrode Atomic Emission Spectrometry

• ASTM D6729-14

  Test Method for:Determination of Individual Components in Spark Ignition Engine Fuels by 100 Metre Capillary High Resolution Gas Chromatography

• ASTM D6730-01R11

  Test Method for:Determination of Individual Components in Spark Ignition Engine Fuels by 100–Metre Capillary (with Precolumn) High-Resolution Gas Chromatography

• ASTM D6731-01R11

  Test Method for:Determining the Aerobic, Aquatic Biodegradability of Lubricants or Lubricant Components in a Closed Respirometer

• ASTM D6732-04R15

  Test Method for:Determination of Copper in Jet Fuels by Graphite Furnace Atomic Absorption Spectrometry

• ASTM D6733-01R11

  Test Method for:Determination of Individual Components in Spark Ignition Engine Fuels by 50-Metre Capillary High Resolution Gas Chromatography

• ASTM D6743-11R15

  Test Method for:Thermal Stability of Organic Heat Transfer Fluids

• ASTM D6744-06R11E01

  Test Method for:Determination of the Thermal Conductivity of Anode Carbons by the Guarded Heat Flow Meter Technique

• ASTM D6745-11R15

  Test Method for:Linear Thermal Expansion of Electrode Carbons

• ASTM D6748-02AR12

  Test Method for:Determination of Potential Instability of Middle Distillate Fuels Caused by the Presence of Phenalenes and Phenalenones (Rapid Method by Portable Spectrophotometer)

• ASTM D6749-02R12

  Test Method for:Pour Point of Petroleum Products (Automatic Air Pressure Method)

• ASTM D6750-15A

  Test Methods for:Evaluation of Engine Oils in a High-Speed, Single-Cylinder Diesel Engine—1K Procedure (0.4 % Fuel Sulfur) and 1N Procedure (0.04 % Fuel Sulfur)

• ASTM D6751-15C

  Specification for:Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels

• ASTM D6756-10R15

  Test Method for:Determination of the Red Dye Concentration and Estimation of the ASTM Color of Diesel Fuel and Heating Oil Using a Portable Visible Spectrophotometer

• ASTM D6791-11

  Test Method for:Determination of Grain Stability of Calcined Petroleum Coke

• ASTM D6792-13

  Practice for:Quality System in Petroleum Products and Lubricants Testing Laboratories

• ASTM D6793-02R12

  Test Method for:Determination of Isothermal Secant and Tangent Bulk Modulus

• ASTM D6794-14

  Test Method for:Measuring the Effect on Filterability of Engine Oils After Treatment with Various Amounts of Water and a Long (6 h) Heating Time

• ASTM D6795-13

  Test Method for:Measuring the Effect on Filterability of Engine Oils After Treatment with Water and Dry Ice and a Short (30 min) Heating Time

• ASTM D6810-13

  Test Method for:Measurement of Hindered Phenolic Antioxidant Content in Non-Zinc Turbine Oils by Linear Sweep Voltammetry

• ASTM D6811

  Test Method for:Measurement of Thermal Stability of Aviation Turbine Fuels under Turbulent Flow Conditions (HiReTS Method)

• ASTM D6812-04AR14

  Practice for:Ground-Based Octane Rating Procedures for Turbocharged/Supercharged Spark Ignition Aircraft Engines

• ASTM D6813

  Guide for:Performance Evaluation of Hydraulic Fluids for Piston Pumps

• ASTM D6821-14

  Test Method for:Low Temperature Viscosity of Drive Line Lubricants in a Constant Shear Stress Viscometer

• ASTM D6822-12B

  Test Method for:Density, Relative Density, and API Gravity of Crude Petroleum and Liquid Petroleum Products by Thermohydrometer Method

• ASTM D6823-08R13

  Specification for:Commercial Boiler Fuels With Used Lubricating Oils

• ASTM D6824-13E01

  Test Method for:Determining Filterability of Aviation Turbine Fuel

• ASTM D6837-13

  Test Method for:Measurement of Effects of Automotive Engine Oils on Fuel Economy of Passenger Cars and Light-Duty Trucks in Sequence VIB Spark Ignition Engine

• ASTM D6838-04R10

  Test Method for:Cummins M11 High Soot Test

• ASTM D6839-15

  Test Method for:Hydrocarbon Types, Oxygenated Compounds and Benzene in Spark Ignition Engine Fuels by Gas Chromatography

• ASTM D6849-13

  Practice for:Storage and Use of Liquefied Petroleum Gases (LPG) in Sample Cylinders for LPG Test Methods

• ASTM D6891-15

  Test Method for:Evaluation of Automotive Engine Oils in the Sequence IVA Spark-Ignition Engine

• ASTM D6892-03R14

  Test Method for:Pour Point of Petroleum Products (Robotic Tilt Method)

• ASTM D6894-13

  Test Method for:Evaluation of Aeration Resistance of Engine Oils in Direct-Injected Turbocharged Automotive Diesel Engine

• ASTM D6895-06R12

  Test Method for:Rotational Viscosity of Heavy Duty Diesel Drain Oils at 100°C

• ASTM D6896-14

  Test Method for:Determination of Yield Stress and Apparent Viscosity of Used Engine Oils at Low Temperature

• ASTM D6897-09

  Test Method for:Vapor Pressure of Liquefied Petroleum Gases (LPG) (Expansion Method)

• ASTM D6898-03R10

  Test Method for:Evaluating Diesel Fuel Lubricity by an Injection Pump Rig

• ASTM D6920-13

  Test Method for:Total Sulfur in Naphthas, Distillates, Reformulated Gasolines, Diesels, Biodiesels, and Motor Fuels by Oxidative Combustion and Electrochemical Detection

• ASTM D6922-13

  Test Method for:Determination of Homogeneity and Miscibility in Automotive Engine Oils

• ASTM D6923-14

  Test Method for:Evaluation of Engine Oils in a High Speed, Single-Cylinder Diesel Engine—Caterpillar 1R Test Procedure

• ASTM D6969-15

  Practice for:Preparation of Calcined Petroleum Coke Samples for Analysis

• ASTM D6970-03R13E01

  Practice for:Collection of Calcined Petroleum Coke Samples for Analysis

• ASTM D6971-09R14

  Test Method for:Measurement of Hindered Phenolic and Aromatic Amine Antioxidant Content in Non-zinc Turbine Oils by Linear Sweep Voltammetry