한국표준정보망(KSSN)

ASTM Annual Book 수록 리스트

핸드북  >  ASTM

    05.04 : 석유제품 및 윤활유(Ⅳ) D6973~끝

  • ASTM D6973-14

    Test Method for:Indicating Wear Characteristics of Petroleum Hydraulic Fluids in a High Pressure Constant Volume Vane Pump
  • ASTM D6974-09R13E02

    Practice for:Enumeration of Viable Bacteria and Fungi in Liquid Fuels—Filtration and Culture Procedures
  • ASTM D6975-04R10

    Test Method for:Cummins M11 EGR Test
  • ASTM D6984-15A

    Test Method for:Evaluation of Automotive Engine Oils in the Sequence IIIF, Spark-Ignition Engine
  • ASTM D6986-03R10

    Test Method for:Free Water, Particulate and Other Contamination in Aviation Fuels (Visual Inspection Procedures)
  • ASTM D6987_D6987M-13A

    Test Method for:Evaluation of Diesel Engine Oils in T-10 Exhaust Gas Recirculation Diesel Engine
  • ASTM D7038-15

    Test Method for:Evaluation of Moisture Corrosion Resistance of Automotive Gear Lubricants
  • ASTM D7039-15A

    Test Method for:Sulfur in Gasoline, Diesel Fuel, Jet Fuel, Kerosine, Biodiesel, Biodiesel Blends, and Gasoline-Ethanol Blends by Monochromatic Wavelength Dispersive X-ray Fluorescence Spectrometry
  • ASTM D7040-04R15

    Test Method for:Determination of Low Levels of Phosphorus in ILSAC GF 4 and Similar Grade Engine Oils by Inductively Coupled Plasma Atomic Emission Spectrometry
  • ASTM D7041-04R10E01

    Test Method for:Determination of Total Sulfur in Light Hydrocarbons, Motor Fuels, and Oils by Online Gas Chromatography with Flame Photometric Detection
  • ASTM D7042-14

    Test Method for:Dynamic Viscosity and Density of Liquids by Stabinger Viscometer (and the Calculation of Kinematic Viscosity)
  • ASTM D7043-12

    Test Method for:Indicating Wear Characteristics of Non-Petroleum and Petroleum Hydraulic Fluids in a Constant Volume Vane Pump
  • ASTM D7044-15

    Specification for:Biodegradable Fire Resistant Hydraulic Fluids
  • ASTM D7058-04R14

    Test Method for:Determination of the Red Dye Concentration and Estimation of Saybolt Color of Aviation Turbine Fuels and Kerosine Using a Portable Visible Spectrophotometer
  • ASTM D7059-09R13

    Test Method for:Determination of Methanol in Crude Oils by Multidimensional Gas Chromatography
  • ASTM D7060-12R14

    Test Method for:Determination of the Maximum Flocculation Ratio and Peptizing Power in Residual and Heavy Fuel Oils (Optical Detection Method)
  • ASTM D7061-12

    Test Method for:Measuring n-Heptane Induced Phase Separation of Asphaltene-Containing Heavy Fuel Oils as Separability Number by an Optical Scanning Device
  • ASTM D7094-12E01

    Test Method for:Flash Point by Modified Continuously Closed Cup (MCCCFP) Tester
  • ASTM D7095-04R14

    Test Method for:Rapid Determination of Corrosiveness to Copper from Petroleum Products Using a Disposable Copper Foil Strip
  • ASTM D7096-10

    Test Method for:Determination of the Boiling Range Distribution of Gasoline by Wide-Bore Capillary Gas Chromatography
  • ASTM D7097-09

    Test Method for:Determination of Moderately High Temperature Piston Deposits by Thermo-Oxidation Engine Oil Simulation Test—TEOST MHT
  • ASTM D7098-08R15

    Test Method for:Oxidation Stability of Lubricants by Thin-Film Oxygen Uptake (TFOUT) Catalyst B
  • ASTM D7109-12

    Test Method for:Shear Stability of Polymer Containing Fluids Using a European Diesel Injector Apparatus at 30 and 90 Cycles
  • ASTM D7110-15

    Test Method for:Determining the Viscosity-Temperature Relationship of Used and Soot-Containing Engine Oils at Low Temperatures
  • ASTM D7111-15A

    Test Method for:Determination of Trace Elements in Middle Distillate Fuels by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)
  • ASTM D7112-12

    Test Method for:Determining Stability and Compatibility of Heavy Fuel Oils and Crude Oils by Heavy Fuel Oil Stability Analyzer (Optical Detection)
  • ASTM D7152-11

    Practice for:Calculating Viscosity of a Blend of Petroleum Products
  • ASTM D7153-15

    Test Method for:Freezing Point of Aviation Fuels (Automatic Laser Method)
  • ASTM D7154-15

    Test Method for:Freezing Point of Aviation Fuels (Automatic Fiber Optical Method)
  • ASTM D7155-11

    Practice for:Evaluating Compatibility of Mixtures of Turbine Lubricating Oils
  • ASTM D7156-15

    Test Method for:Evaluation of Diesel Engine Oils in the T-11 Exhaust Gas Recirculation Diesel Engine
  • ASTM D7157-12

    Test Method for:Determination of Intrinsic Stability of Asphaltene-Containing Residues, Heavy Fuel Oils, and Crude Oils (n-Heptane Phase Separation; Optical Detection)
  • ASTM D7169-11

    Test Method for:Boiling Point Distribution of Samples with Residues Such as Crude Oils and Atmospheric and Vacuum Residues by High Temperature Gas Chromatography
  • ASTM D7171-05R11

    Test Method for:Hydrogen Content of Middle Distillate Petroleum Products by Low-Resolution Pulsed Nuclear Magnetic Resonance Spectroscopy
  • ASTM D7212-13

    Test Method for:Low Sulfur in Automotive Fuels by Energy-Dispersive X-ray Fluorescence Spectrometry Using a Low-Background Proportional Counter
  • ASTM D7213-15

    Test Method for:Boiling Range Distribution of Petroleum Distillates in the Boiling Range from 100 °C to 615 °C by Gas Chromatography
  • ASTM D7214-07AR12

    Test Method for:Determination of the Oxidation of Used Lubricants by FT-IR Using Peak Area Increase Calculation
  • ASTM D7215-08R13

    Test Method for:Calculated Flash Point from Simulated Distillation Analysis of Distillate Fuels
  • ASTM D7216-15

    Test Method for:Determining Automotive Engine Oil Compatibility with Typical Seal Elastomers
  • ASTM D7217-11

    Test Method for:Determining Extreme Pressure Properties of Solid Bonded Films Using a High-Frequency, Linear-Oscillation (SRV) Test Machine
  • ASTM D7220-12

    Test Method for:Sulfur in Automotive, Heating, and Jet Fuels by Monochromatic Energy Dispersive X-ray Fluorescence Spectrometry
  • ASTM D7223-11R15

    Specification for:Aviation Certification Turbine Fuel
  • ASTM D7224-14

    Test Method for:Determining Water Separation Characteristics of Kerosine-Type Aviation Turbine Fuels Containing Additives by Portable Separometer
  • ASTM D7235-14

    Guide for:Establishing a Linear Correlation Relationship Between Analyzer and Primary Test Method Results Using Relevant ASTM Standard Practices
  • ASTM D7236-07R13

    Test Method for:Flash Point by Small Scale Closed Cup Tester (Ramp Method)
  • ASTM D7260-12

    Practice for:Optimization, Calibration, and Validation of Inductively Coupled Plasma-Atomic Emission Spectrometry (ICP-AES) for Elemental Analysis of Petroleum Products and Lubricants
  • ASTM D7261-14

    Test Method for:Determining Water Separation Characteristics of Diesel Fuels by Portable Separometer
  • ASTM D7278-11

    Guide for:Prediction of Analyzer Sample System Lag Times
  • ASTM D7279-14A

    Test Method for:Kinematic Viscosity of Transparent and Opaque Liquids by Automated Houillon Viscometer
  • ASTM D7280-15

    Test Method for:Quinoline-Insoluble (QI) Content of Tar and Pitch by Stainless Steel Crucible Filtration
  • ASTM D7303-12

    Test Method for:Determination of Metals in Lubricating Greases by Inductively Coupled Plasma Atomic Emission Spectrometry
  • ASTM D7317-07R13

    Test Method for:Coagulated Pentane Insolubles in Used Lubricating Oils by Paper Filtration (LMOA Method)
  • ASTM D7318-13

    Test Method for:Existent Inorganic Sulfate in Ethanol by Potentiometric Titration
  • ASTM D7319-13

    Test Method for:Determination of Existent and Potential Sulfate and Inorganic Chloride in Fuel Ethanol and Butanol by Direct Injection Suppressed Ion Chromatography
  • ASTM D7320-15A

    Test Method for:Evaluation of Automotive Engine Oils in the Sequence IIIG, Spark-Ignition Engine
  • ASTM D7321-14

    Test Method for:Test Method for Particulate Contamination of Biodiesel B100 Blend Stock Biodiesel Esters and Biodiesel Blends by Laboratory Filtration
  • ASTM D7328-13

    Test Method for:Determination of Existent and Potential Inorganic Sulfate and Total Inorganic Chloride in Fuel Ethanol by Ion Chromatography Using Aqueous Sample Injection
  • ASTM D7342-07

    Test Method for:Shear Stability of Lubricating Grease in Presence of Water (Water Stability Test)
  • ASTM D7343-12

    Practice for:Optimization, Sample Handling, Calibration, and Validation of X-ray Fluorescence Spectrometry Methods for Elemental Analysis of Petroleum Products and Lubricants
  • ASTM D7344-14

    Test Method for:Distillation of Petroleum Products and Liquid Fuels at Atmospheric Pressure (Mini Method)
  • ASTM D7345-14

    Test Method for:Distillation of Petroleum Products and Liquid Fuels at Atmospheric Pressure (Micro Distillation Method)
  • ASTM D7346-15

    Test Method for:No Flow Point and Pour Point of Petroleum Products and Liquid Fuels
  • ASTM D7347-07E01

    Test Method for:Determination of Olefin Content in Denatured Ethanol by Supercritical Fluid Chromatography
  • ASTM D7371-14

    Test Method for:Determination of Biodiesel (Fatty Acid Methyl Esters) Content in Diesel Fuel Oil Using Mid Infrared Spectroscopy (FTIR-ATR-PLS Method)
  • ASTM D7372-12

    Guide for:Analysis and Interpretation of Proficiency Test Program Results
  • ASTM D7373-12

    Test Method for:Predicting Biodegradability of Lubricants Using a Bio-kinetic Model
  • ASTM D7397-10

    Test Method for:Cloud Point of Petroleum Products (Miniaturized Optical Method)
  • ASTM D7398-11

    Test Method for:Boiling Range Distribution of Fatty Acid Methyl Esters (FAME) in the Boiling Range from 100 to 615°C by Gas Chromatography
  • ASTM D7412-09

    Test Method for:Condition Monitoring of Phosphate Antiwear Additives in In-Service Petroleum and Hydrocarbon Based Lubricants by Trend Analysis Using Fourier Transform Infrared (FT-IR) Spectrometry
  • ASTM D7414-09

    Test Method for:Condition Monitoring of Oxidation in In-Service Petroleum and Hydrocarbon Based Lubricants by Trend Analysis Using Fourier Transform Infrared (FT-IR) Spectrometry
  • ASTM D7415-09

    Test Method for:Condition Monitoring of Sulfate By-Products in In-Service Petroleum and Hydrocarbon Based Lubricants by Trend Analysis Using Fourier Transform Infrared (FT-IR) Spectrometry
  • ASTM D7416-09R15

    Practice for:Analysis of In-Service Lubricants Using a Particular Five-Part (Dielectric Permittivity, Time-Resolved Dielectric Permittivity with Switching Magnetic Fields, Laser Particle Counter, Microscopic Debris Analysis, and Orbital Viscometer) Integrated Tester
  • ASTM D7417-10

    Test Method for:Analysis of In-Service Lubricants Using Particular Four-Part Integrated Tester (Atomic Emission Spectroscopy, Infrared Spectroscopy, Viscosity, and Laser Particle Counter)
  • ASTM D7418-12

    Practice for:Set-Up and Operation of Fourier Transform Infrared (FT-IR) Spectrometers for In-Service Oil Condition Monitoring
  • ASTM D7419-13

    Test Method for:Determination of Total Aromatics and Total Saturates in Lube Basestocks by High Performance Liquid Chromatography (HPLC) with Refractive Index Detection
  • ASTM D7420-11

    Test Method for:Determining Tribomechanical Properties of Grease Lubricated Plastic Socket Suspension Joints Using a High-Frequency, Linear-Oscillation (SRV) Test Machine
  • ASTM D7421-11

    Test Method for:Determining Extreme Pressure Properties of Lubricating Oils Using High-Frequency, Linear-Oscillation (SRV) Test Machine
  • ASTM D7422-15A

    Test Method for:Evaluation of Diesel Engine Oils in T-12 Exhaust Gas Recirculation Diesel Engine
  • ASTM D7423-09R14

    Test Method for:Determination of Oxygenates in C2, C3, C4, and C5 Hydrocarbon Matrices by Gas Chromatography and Flame Ionization Detection
  • ASTM D7450-13

    Specification for:Performance of Rear Axle Gear Lubricants Intended for API Category GL-5 Service
  • ASTM D7451-08AR13

    Test Method for:Water Separation Properties of Light and Middle Distillate, and Compression and Spark Ignition Fuels
  • ASTM D7452-15

    Test Method for:Evaluation of the Load Carrying Properties of Lubricants Used for Final Drive Axles, Under Conditions of High Speed and Shock Loading
  • ASTM D7453-09R15

    Practice for:Sampling of Petroleum Products for Analysis by Process Stream Analyzers and for Process Stream Analyzer System Validation
  • ASTM D7454-14E01

    Test Method for:Determination of Vibrated Bulk Density of Calcined Petroleum Coke using a Semi-Automated Apparatus
  • ASTM D7455-14

    Practice for:Sample Preparation of Petroleum and Lubricant Products for Elemental Analysis
  • ASTM D7462-11

    Test Method for:Oxidation Stability of Biodiesel (B100) and Blends of Biodiesel with Middle Distillate Petroleum Fuel (Accelerated Method)
  • ASTM D7463-15

    Test Method for:Adenosine Triphosphate (ATP) Content of Microorganisms in Fuel, Fuel/Water Mixtures, and Fuel Associated Water
  • ASTM D7464-14

    Practice for:Manual Sampling of Liquid Fuels, Associated Materials and Fuel System Components for Microbiological Testing
  • ASTM D7467-15C

    Specification for:Diesel Fuel Oil, Biodiesel Blend (B6 to B20)
  • ASTM D7468-15

    Test Method for:Cummins ISM Test
  • ASTM D7482-15

    Practice for:Sampling, Storage, and Handling of Hydrocarbons for Mercury Analysis
  • ASTM D7483-13A

    Test Method for:Determination of Dynamic Viscosity and Derived Kinematic Viscosity of Liquids by Oscillating Piston Viscometer
  • ASTM D7484-15

    Test Method for:Evaluation of Automotive Engine Oils for Valve-Train Wear Performance in Cummins ISB Medium-Duty Diesel Engine
  • ASTM D7500-15

    Test Method for:Determination of Boiling Range Distribution of Distillates and Lubricating Base Oils—in Boiling Range from 100 °C to 735 °C by Gas Chromatography
  • ASTM D7501-12A

    Test Method for:Determination of Fuel Filter Blocking Potential of Biodiesel (B100) Blend Stock by Cold Soak Filtration Test (CSFT)
  • ASTM D7524-10R15

    Test Method for:Determination of Static Dissipater Additives (SDA) in Aviation Turbine Fuel and Middle Distillate Fuels—High Performance Liquid Chromatograph (HPLC) Method
  • ASTM D7525-14

    Test Method for:Oxidation Stability of Spark Ignition Fuel—Rapid Small Scale Oxidation Test (RSSOT)
  • ASTM D7527-10

    Test Method for:Measurement of Antioxidant Content in Lubricating Greases by Linear Sweep Voltammetry
  • ASTM D7528-13

    Test Method for:Bench Oxidation of Engine Oils by ROBO Apparatus
  • ASTM D7544-12

    Specification for:Pyrolysis Liquid Biofuel
  • ASTM D7545-14

    Test Method for:Oxidation Stability of Middle Distillate Fuels—Rapid Small Scale Oxidation Test (RSSOT)
  • ASTM D7546-15

    Test Method for:Determination of Moisture in New and In-Service Lubricating Oils and Additives by Relative Humidity Sensor
  • ASTM D7547-15

    Specification for:Hydrocarbon Unleaded Aviation Gasoline
  • ASTM D7548-09

    Test Method for:Determination of Accelerated Iron Corrosion in Petroleum Products
  • ASTM D7549-15A

    Test Method for:Evaluation of Heavy-Duty Engine Oils under High Output Conditions—Caterpillar C13 Test Procedure
  • ASTM D7563-10

    Test Method for:Evaluation of the Ability of Engine Oil to Emulsify Water and Simulated Ed85 Fuel
  • ASTM D7566-15C

    Specification for:Aviation Turbine Fuel Containing Synthesized Hydrocarbons
  • ASTM D7576-10

    Test Method for:Determination of Benzene and Total Aromatics in Denatured Fuel Ethanol by Gas Chromatography
  • ASTM D7577-12

    Test Method for:Determining the Accelerated Iron Corrosion Rating of Denatured Fuel Ethanol and Ethanol Fuel Blends
  • ASTM D7578-15

    Guide for:Calibration Requirements for Elemental Analysis of Petroleum Products and Lubricants
  • ASTM D7579-09R13

    Test Method for:Pyrolysis Solids Content in Pyrolysis Liquids by Filtration of Solids in Methanol
  • ASTM D7589-15A

    Test Method for:Measurement of Effects of Automotive Engine Oils on Fuel Economy of Passenger Cars and Light-Duty Trucks in Sequence VID Spark Ignition Engine
  • ASTM D7590-09R14

    Guide for:Measurement of Remaining Primary Antioxidant Content In In-Service Industrial Lubricating Oils by Linear Sweep Voltammetry
  • ASTM D7591-12

    Test Method for:Determination of Free and Total Glycerin in Biodiesel Blends by Anion Exchange Chromatography
  • ASTM D7592-15A

    Specification for:Specification for Grade 94 Unleaded Aviation Gasoline Certification and Test Fuel
  • ASTM D7593-14

    Test Method for:Determination of Fuel Dilution for In-Service Engine Oils by Gas Chromatography
  • ASTM D7594-11

    Test Method for:Determining Fretting Wear Resistance of Lubricating Greases Under High Hertzian Contact Pressures Using a High-Frequency, Linear-Oscillation (SRV) Test Machine
  • ASTM D7596-14

    Test Method for:Automatic Particle Counting and Particle Shape Classification of Oils Using a Direct Imaging Integrated Tester
  • ASTM D7603-13

    Test Method for:Determination of Storage Stability and Compatibility in Automotive Gear Oils
  • ASTM D7618-13

    Specification for:Ethyl Tertiary-Butyl Ether (ETBE) for Blending with Aviation Spark-Ignition Engine Fuel
  • ASTM D7619-12B

    Test Method for:Sizing and Counting Particles in Light and Middle Distillate Fuels, by Automatic Particle Counter
  • ASTM D7620-10R15

    Test Method for:Determination of Total Sulfur in Liquid Hydrocarbon Based Fuels by Continuous Injection, Air Oxidation and Ultraviolet Fluorescence Detection
  • ASTM D7621-15A

    Test Method for:Determination of Hydrogen Sulfide in Fuel Oils by Rapid Liquid Phase Extraction
  • ASTM D7622-10R15

    Test Method for:Total Mercury in Crude Oil Using Combustion and Direct Cold Vapor Atomic Absorption Method with Zeeman Background Correction
  • ASTM D7623-10R15

    Test Method for:Total Mercury in Crude Oil Using Combustion-Gold Amalgamation and Cold Vapor Atomic Absorption Method
  • ASTM D7624-10

    Test Method for:Condition Monitoring of Nitration in In-Service Petroleum and Hydrocarbon-Based Lubricants by Trend Analysis Using Fourier Transform Infrared (FT-IR) Spectrometry
  • ASTM D7646-10R14

    Test Method for:Determination of Cooling Characteristics of Aqueous Polymer Quenchants for Aluminum Alloys by Cooling Curve Analysis
  • ASTM D7647-10

    Test Method for:Automatic Particle Counting of Lubricating and Hydraulic Fluids Using Dilution Techniques to Eliminate the Contribution of Water and Interfering Soft Particles by Light Extinction
  • ASTM D7665-10R14

    Guide for:Evaluation of Biodegradable Heat Transfer Fluids
  • ASTM D7666-12

    Specification for:Triglyceride Burner Fuel
  • ASTM D7667-10R15

    Test Method for:Determination of Corrosiveness to Silver by Automotive Spark-Ignition Engine Fuel—Thin Silver Strip Method
  • ASTM D7668-14A

    Test Method for:Determination of Derived Cetane Number (DCN) of Diesel Fuel Oils—Ignition Delay and Combustion Delay Using a Constant Volume Combustion Chamber Method
  • ASTM D7669-15

    Guide for:Practical Lubricant Condition Data Trend Analysis
  • ASTM D7670-10

    Practice for:Processing In-service Fluid Samples for Particulate Contamination Analysis Using Membrane Filters
  • ASTM D7671-10R15

    Test Method for:Corrosiveness to Silver by Automotive Spark–Ignition Engine Fuel–Silver Strip Method
  • ASTM D7683-11

    Test Method for:Cloud Point of Petroleum Products (Small Test Jar Method)
  • ASTM D7684-11

    Guide for:Microscopic Characterization of Particles from In-Service Lubricants
  • ASTM D7685-11

    Practice for:In-Line, Full Flow, Inductive Sensor for Ferromagnetic and Non-ferromagnetic Wear Debris Determination and Diagnostics for Aero-Derivative and Aircraft Gas Turbine Engine Bearings
  • ASTM D7686-11

    Test Method for:Field-Based Condition Monitoring of Soot in In-Service Lubricants Using a Fixed-Filter Infrared (IR) Instrument
  • ASTM D7687-11

    Test Method for:Measurement of Cellular Adenosine Triphosphate in Fuel, Fuel/Water Mixtures, and Fuel-Associated Water with Sample Concentration by Filtration
  • ASTM D7688-11

    Test Method for:Evaluating Lubricity of Diesel Fuels by the High-Frequency Reciprocating Rig (HFRR) by Visual Observation
  • ASTM D7689-11

    Test Method for:Cloud Point of Petroleum Products (Mini Method)
  • ASTM D7690-11

    Practice for:Microscopic Characterization of Particles from In-Service Lubricants by Analytical Ferrography
  • ASTM D7691-11E01

    Test Method for:Multielement Analysis of Crude Oils Using Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)
  • ASTM D7717-11

    Practice for:Preparing Volumetric Blends of Denatured Fuel Ethanol and Gasoline Blendstocks for Laboratory Analysis
  • ASTM D7718-11

    Practice for:Obtaining In-Service Samples of Lubricating Grease
  • ASTM D7719-15A

    Specification for:High Aromatic Content Unleaded Hydrocarbon Aviation Gasoline
  • ASTM D7720-11

    Guide for:Statistically Evaluating Measurand Alarm Limits when Using Oil Analysis to Monitor Equipment and Oil for Fitness and Contamination
  • ASTM D7721-11

    Practice for:Determining the Effect of Fluid Selection on Hydraulic System or Component Efficiency
  • ASTM D7739-11

    Practice for:Thermal Oxidative Stability Measurement via Quartz Crystal Microbalance
  • ASTM D7740-11

    Practice for:Optimization, Calibration, and Validation of Atomic Absorption Spectrometry for Metal Analysis of Petroleum Products and Lubricants
  • ASTM D7751-14E01

    Test Method for:Determination of Additive Elements in Lubricating Oils by EDXRF Analysis
  • ASTM D7752-11

    Practice for:Evaluating Compatibility of Mixtures of Hydraulic Fluids
  • ASTM D7753-12

    Test Method for:Hydrocarbon Types and Benzene in Light Petroleum Distillates by Gas Chromatography
  • ASTM D7754-11E01

    Test Method for:Determination of Trace Oxygenates in Automotive Spark-Ignition Engine Fuel by Multidimensional Gas Chromatography
  • ASTM D7755-11

    Practice for:Determining the Wear Volume on Standard Test Pieces Used by High-Frequency, Linear-Oscillation (SRV) Test Machine