한국표준정보망(KSSN)

ASTM Annual Book 수록 리스트

핸드북  >  ASTM

    08.01 : 플라스틱 (Ⅰ) D256-D3159

  • ASTM D0256-10E01

    Test Methods for:Determining the Izod Pendulum Impact Resistance of Plastics
  • ASTM D0494-11

    Test Method for:Acetone Extraction of Phenolic Molded or Laminated Products
  • ASTM D0542-14

    Test Method for:Index of Refraction of Transparent Organic Plastics
  • ASTM D0543-14

    Practices for:Evaluating the Resistance of Plastics to Chemical Reagents
  • ASTM D0570-98R10E01

    Test Method for:Water Absorption of Plastics
  • ASTM D0618-13

    Practice for:Conditioning Plastics for Testing
  • ASTM D0635-14

    Test Method for:Rate of Burning and/or Extent and Time of Burning of Plastics in a Horizontal Position
  • ASTM D0638-14

    Test Method for:Tensile Properties of Plastics
  • ASTM D0648

    Test Method for:Deflection Temperature of Plastics Under Flexural Load in the Edgewise Position
  • ASTM D0695-15

    Test Method for:Compressive Properties of Rigid Plastics
  • ASTM D0696-08E01

    Test Method for:Coefficient of Linear Thermal Expansion of Plastics Between −30°C and 30°C with a Vitreous Silica Dilatometer
  • ASTM D0704-99R12

    Specification for:Melamine-Formaldehyde Molding Compounds
  • ASTM D0705-99R12

    Specification for:Urea-Formaldehyde Molding Compounds
  • ASTM D0706-15

    Classification System and Basis for Specifications for:Cellulose Acetate Molding and Extrusion Compounds (CA)
  • ASTM D0707-15

    Classification System and Basis for Specification for:Cellulose Acetate Butyrate Molding and Extrusion Compounds (CAB)
  • ASTM D0731-10

    Test Method for:Molding Index of Thermosetting Molding Powder
  • ASTM D0732-10

    Test Method for:Shear Strength of Plastics by Punch Tool
  • ASTM D0746-14

    Test Method for:Brittleness Temperature of Plastics and Elastomers by Impact
  • ASTM D0747-10

    Test Method for:Apparent Bending Modulus of Plastics by Means of a Cantilever Beam
  • ASTM D0785-08R15

    Test Method for:Rockwell Hardness of Plastics and Electrical Insulating Materials
  • ASTM D0787-12

    Specification for:Ethyl Cellulose Molding and Extrusion Compounds
  • ASTM D0788-14

    Classification System for:Poly(Methyl Methacrylate) (PMMA) Molding and Extrusion Compounds
  • ASTM D0789-15

    Test Methods for:Determination of Solution Viscosities of Polyamide (PA)
  • ASTM D0790-15E01

    Test Methods for:Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials
  • ASTM D0792-13

    Test Methods for:Density and Specific Gravity (Relative Density) of Plastics by Displacement
  • ASTM D0882-12

    Test Method for:Tensile Properties of Thin Plastic Sheeting
  • ASTM D0883-12

    Terminology Relating to:Plastics
  • ASTM D0952-15

    Test Method for:Bond or Cohesive Strength of Sheet Plastics and Electrical Insulating Materials
  • ASTM D0953-10

    Test Method for:Bearing Strength of Plastics
  • ASTM D0955-08R14

    Test Method of:Measuring Shrinkage from Mold Dimensions of Thermoplastics
  • ASTM D0957-12

    Practice for:Determining Surface Temperature of Molds for Plastics
  • ASTM D1003-13

    Test Method for:Haze and Luminous Transmittance of Transparent Plastics
  • ASTM D1004-13

    Test Method for:Tear Resistance (Graves Tear) of Plastic Film and Sheeting
  • ASTM D1042-12

    Test Method for:Linear Dimensional Changes of Plastics Caused by Exposure to Heat and Moisture
  • ASTM D1043-10

    Test Method for:Stiffness Properties of Plastics as a Function of Temperature by Means of a Torsion Test
  • ASTM D1044-13

    Test Method for:Resistance of Transparent Plastics to Surface Abrasion
  • ASTM D1045-14

    Test Methods for:Sampling and Testing Plasticizers Used in Plastics
  • ASTM D1055

    Specifications for:Flexible Cellular Materials—Latex Foam
  • ASTM D1056-14

    Specification for:Flexible Cellular Materials—Sponge or Expanded Rubber
  • ASTM D1201-13

    Specification for:Thermosetting Polyester Molding Compounds
  • ASTM D1203-10

    Test Methods for:Volatile Loss From Plastics Using Activated Carbon Methods
  • ASTM D1204-14

    Test Method for:Linear Dimensional Changes of Nonrigid Thermoplastic Sheeting or Film at Elevated Temperature
  • ASTM D1238-13

    Test Method for:Melt Flow Rates of Thermoplastics by Extrusion Plastometer
  • ASTM D1239-14

    Test Method for:Resistance of Plastic Films to Extraction by Chemicals
  • ASTM D1243-15

    Test Method for:Dilute Solution Viscosity of Vinyl Chloride Polymers
  • ASTM D1248-12

    Specification for:Polyethylene Plastics Extrusion Materials for Wire and Cable
  • ASTM D1430-11

    Classification System for:Polychlorotrifluoroethylene (PCTFE) Plastics
  • ASTM D1435-13

    Practice for:Outdoor Weathering of Plastics
  • ASTM D1499-13

    Practice for:Filtered Open-Flame Carbon-Arc Exposures of Plastics
  • ASTM D1505-10

    Test Method for:Density of Plastics by the Density-Gradient Technique
  • ASTM D1525-09

    Test Method for:Vicat Softening Temperature of Plastics
  • ASTM D1562-15

    Classification System and Basis for Specification for:Cellulose Acetate Propionate Molding and Extrusion Compounds (CAP)
  • ASTM D1593-13

    Specification for:Nonrigid Vinyl Chloride Plastic Film and Sheeting
  • ASTM D1600-14

    Terminology for:Abbreviated Terms Relating to Plastics
  • ASTM D1601-12

    Test Method for:Dilute Solution Viscosity of Ethylene Polymers
  • ASTM D1603-14

    Test Method for:Carbon Black Content in Olefin Plastics
  • ASTM D1621-10

    Test Method for:Compressive Properties of Rigid Cellular Plastics
  • ASTM D1622_D1622M-14

    Test Method for:Apparent Density of Rigid Cellular Plastics
  • ASTM D1623-09

    Test Method for:Tensile and Tensile Adhesion Properties of Rigid Cellular Plastics
  • ASTM D1636-13

    Specification for:Allyl Molding Compounds
  • ASTM D1667-05R11

    Specification for:Flexible Cellular Materials—Poly (Vinyl Chloride) Foam (Closed-Cell)
  • ASTM D1693-15

    Test Method for:Environmental Stress-Cracking of Ethylene Plastics
  • ASTM D1708-13

    Test Method for:Tensile Properties of Plastics by Use of Microtensile Specimens
  • ASTM D1709-15A

    Test Methods for:Impact Resistance of Plastic Film by the Free-Falling Dart Method
  • ASTM D1710-15

    Specification for:Extruded Polytetrafluoroethylene (PTFE) Rod, Heavy Walled Tubing and Basic Shapes
  • ASTM D1712-09R14

    Practice for:Resistance of Plastics to Sulfide Staining
  • ASTM D1746-15

    Test Method for:Transparency of Plastic Sheeting
  • ASTM D1755-15

    Specification for:Poly(Vinyl Chloride) Resins
  • ASTM D1763-00R13

    Specification for:Epoxy Resins
  • ASTM D1784-11

    Specification for:Rigid Poly(Vinyl Chloride) (PVC) Compounds and Chlorinated Poly(Vinyl Chloride) (CPVC) Compounds
  • ASTM D1786-10

    Specification for:Toluene Diisocyanate
  • ASTM D1790-14

    Test Method for:Brittleness Temperature of Plastic Sheeting by Impact
  • ASTM D1822-13

    Test Method for:Tensile-Impact Energy to Break Plastics and Electrical Insulating Materials
  • ASTM D1823-95R09

    Test Method for:Apparent Viscosity of Plastisols and Organosols at High Shear Rates by Extrusion Viscometer
  • ASTM D1824-95R10

    Test Method for:Apparent Viscosity of Plastisols and Organosols at Low Shear Rates
  • ASTM D1894-14

    Test Method for:Static and Kinetic Coefficients of Friction of Plastic Film and Sheeting
  • ASTM D1895-96R10E01

    Test Methods for:Apparent Density, Bulk Factor, and Pourability of Plastic Materials
  • ASTM D1896_D1896M-10

    Practice for:Transfer Molding Test Specimens of Thermosetting Compounds
  • ASTM D1921-12

    Test Methods for:Particle Size (Sieve Analysis) of Plastic Materials
  • ASTM D1922-15

    Test Method for:Propagation Tear Resistance of Plastic Film and Thin Sheeting by Pendulum Method
  • ASTM D1929-14

    Test Method for:Determining Ignition Temperature of Plastics
  • ASTM D1938-14

    Test Method for:Tear-Propagation Resistance (Trouser Tear) of Plastic Film and Thin Sheeting by a Single-Tear Method
  • ASTM D1972

    Practice for:Generic Marking of Plastic Products
  • ASTM D1998-15

    Specification for:Polyethylene Upright Storage Tanks
  • ASTM D2103-15

    Specification for:Polyethylene Film and Sheeting
  • ASTM D2115-10

    Practice for:Oven Heat Stability of Poly(Vinyl Chloride) Compositions
  • ASTM D2116-07R12

    Specification for:FEP-Fluorocarbon Molding and Extrusion Materials
  • ASTM D2124-99R11

    Test Method for:Analysis of Components in Poly(Vinyl Chloride) Compounds Using an Infrared Spectrophotometric Technique
  • ASTM D2126-15

    Test Method for:Response of Rigid Cellular Plastics to Thermal and Humid Aging
  • ASTM D2222-14

    Test Method for:Methanol Extract of Vinyl Chloride Resins
  • ASTM D2238-92R12E01

    Test Methods for:Absorbance of Polyethylene Due to Methyl Groups at 1378 cm−1
  • ASTM D2287-12

    Specification for:Nonrigid Vinyl Chloride Polymer and Copolymer Molding and Extrusion Compounds
  • ASTM D2291-09

    Practice for:Fabrication of Ring Test Specimens for Glass-Resin Composites
  • ASTM D2343-09

    Test Method for:Tensile Properties of Glass Fiber Strands, Yarns, and Rovings Used in Reinforced Plastics
  • ASTM D2383-14

    Practice for:Testing Plasticizer Compatibility in Poly(Vinyl Chloride) (PVC) Compounds Under Humid Conditions
  • ASTM D2396-94R12

    Test Methods for:Powder-Mix Time of Poly(Vinyl Chloride) (PVC) Resins Using a Torque Rheometer
  • ASTM D2457-13

    Test Method for:Specular Gloss of Plastic Films and Solid Plastics
  • ASTM D2463-15

    Test Method for:Drop Impact Resistance of Blow-Molded Thermoplastic Containers
  • ASTM D2538-02R10

    Practice for:Fusion of Poly(Vinyl Chloride) (PVC) Compounds Using a Torque Rheometer
  • ASTM D2561-12

    Test Method for:Environmental Stress-Crack Resistance of Blow-Molded Polyethylene Containers
  • ASTM D2562-94R15

    Practice for:Classifying Visual Defects in Parts Molded from Reinforced Thermosetting Plastics
  • ASTM D2563-08R15

    Practice for:Classifying Visual Defects in Glass-Reinforced Plastic Laminate Parts
  • ASTM D2565-99R08

    Practice for:Xenon-Arc Exposure of Plastics Intended for Outdoor Applications
  • ASTM D2578-09

    Test Method for:Wetting Tension of Polyethylene and Polypropylene Films
  • ASTM D2581-09

    Classification System for:Polybutylene (PB) Plastics Molding and Extrusion Materials
  • ASTM D2582-09

    Test Method for:Puncture-Propagation Tear Resistance of Plastic Film and Thin Sheeting
  • ASTM D2583-13A

    Test Method for:Indentation Hardness of Rigid Plastics by Means of a Barcol Impressor
  • ASTM D2584-11

    Test Method for:Ignition Loss of Cured Reinforced Resins
  • ASTM D2647-10

    Specification for:Crosslinkable Ethylene Plastics
  • ASTM D2659-11

    Test Method for:Column Crush Properties of Blown Thermoplastic Containers
  • ASTM D2673-14

    Specification for:Oriented Polypropylene Film
  • ASTM D2684_D2684M-15

    Test Method for:Permeability of Thermoplastic Containers to Packaged Reagents or Proprietary Products
  • ASTM D2732-14

    Test Method for:Unrestrained Linear Thermal Shrinkage of Plastic Film and Sheeting
  • ASTM D2734-09

    Test Methods for:Void Content of Reinforced Plastics
  • ASTM D2765-11

    Test Methods for:Determination of Gel Content and Swell Ratio of Crosslinked Ethylene Plastics
  • ASTM D2838-09E01

    Test Method for:Shrink Tension and Orientation Release Stress of Plastic Film and Thin Sheeting
  • ASTM D2839-10

    Practice for:Use of a Melt Index Strand for Determining Density of Polyethylene
  • ASTM D2842-12

    Test Method for:Water Absorption of Rigid Cellular Plastics
  • ASTM D2843-10

    Test Method for:Density of Smoke from the Burning or Decomposition of Plastics
  • ASTM D2857

    Practice for:Dilute Solution Viscosity of Polymers
  • ASTM D2863-13

    Test Method for:Measuring the Minimum Oxygen Concentration to Support Candle-Like Combustion of Plastics (Oxygen Index)
  • ASTM D2911-10

    Specification for:Dimensions and Tolerances for Plastic Bottles
  • ASTM D2923

    Test Method for:Rigidity of Polyolefin Film and Sheeting
  • ASTM D2990-09

    Test Methods for:Tensile, Compressive, and Flexural Creep and Creep-Rupture of Plastics
  • ASTM D3012-13

    Test Method for:Thermal-Oxidative Stability of Polypropylene Using a Specimen Rotator Within an Oven
  • ASTM D3013-13

    Specification for:Epoxy Molding Compounds
  • ASTM D3014-11

    Test Method for:Flame Height, Time of Burning, and Loss of Mass of Rigid Thermoset Cellular Plastics in a Vertical Position
  • ASTM D3016-97R10

    Practice for:Use of Liquid Exclusion Chromatography Terms and Relationships
  • ASTM D3030-11

    Test Method for:Volatile Matter (Including Water) of Vinyl Chloride Resins
  • ASTM D3045-92R10

    Practice for:Heat Aging of Plastics Without Load
  • ASTM D3123-09

    Test Method for:Spiral Flow of Low-Pressure Thermosetting Molding Compounds
  • ASTM D3124-98R11

    Test Method for:Vinylidene Unsaturation in Polyethylene by Infrared Spectrophotometry
  • ASTM D3159-15

    Specification for:Modified ETFE Fluoropolymer Molding and Extrusion Materials