한국표준정보망(KSSN)

ASTM Annual Book 수록 리스트

핸드북  >  ASTM

    08.03 : 플라스틱 (Ⅲ) D5117-끝

  • ASTM C0581-15

    Practice for:Determining Chemical Resistance of Thermosetting Resins Used in Glass-Fiber-Reinforced Structures Intended for Liquid Service
  • ASTM C0582-09

    Specification for:Contact-Molded Reinforced Thermosetting Plastic (RTP) Laminates for Corrosion-Resistant Equipment
  • ASTM D1494-12

    Test Method for:Diffuse Light Transmission Factor of Reinforced Plastics Panels
  • ASTM D2105-01R14

    Test Method for:Longitudinal Tensile Properties of “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Tube
  • ASTM D2143-15

    Test Method for:Cyclic Pressure Strength of Reinforced, Thermosetting Plastic Pipe
  • ASTM D2310-06R12

    Classification for:Machine-Made “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe
  • ASTM D2517-06R11

    Specification for:Reinforced Epoxy Resin Gas Pressure Pipe and Fittings
  • ASTM D2924-12

    Test Method for:External Pressure Resistance of “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe
  • ASTM D2925-14

    Test Method for:Beam Deflection of “Fiberglass” (Glass-Fiber-Reinforced Thermosetting Resin) Pipe Under Full Bore Flow
  • ASTM D2992-12

    Practice for:Obtaining Hydrostatic or Pressure Design Basis for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Fittings
  • ASTM D2996-15

    Specification for:Filament-Wound “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe
  • ASTM D2997-15

    Specification for:Centrifugally Cast “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe
  • ASTM D3262-11

    Specification for:“Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Sewer Pipe
  • ASTM D3299-10

    Specification for:Filament-Wound Glass-Fiber-Reinforced Thermoset Resin Corrosion-Resistant Tanks
  • ASTM D3517-14

    Specification for:“Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pressure Pipe
  • ASTM D3567-97R11

    Practice for:Determining Dimensions of “Fiberglass” (Glass-Fiber-Reinforced Thermosetting Resin) Pipe and Fittings
  • ASTM D3678-14

    Specification for:Rigid Poly(Vinyl Chloride) (PVC) Interior-Profile Extrusions
  • ASTM D3679-13

    Specification for:Rigid Poly(Vinyl Chloride) (PVC) Siding
  • ASTM D3681-12E01

    Test Method for:Chemical Resistance of “Fiberglass” (Glass–Fiber–Reinforced Thermosetting-Resin) Pipe in a Deflected Condition
  • ASTM D3753-12E01

    Specification for:Glass-Fiber-Reinforced Polyester Manholes and Wetwells
  • ASTM D3754-14

    Specification for:“Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Sewer and Industrial Pressure Pipe
  • ASTM D3839-14

    Guide for:Underground Installation of “Fiberglass” (Glass-Fiber Reinforced Thermosetting-Resin) Pipe
  • ASTM D3840-14

    Specification for:“Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe Fittings for Nonpressure Applications
  • ASTM D3841-97R08E01

    Specification for:Glass-Fiber-Reinforced Polyester Plastic Panels
  • ASTM D3982-08R14

    Specification for:Contact Molded “Fiberglass” (Glass Fiber Reinforced Thermosetting Resin) Ducts
  • ASTM D4024-15

    Specification for:Machine Made “Fiberglass” (Glass-Fiber-Reinforced Thermosetting Resin) Flanges
  • ASTM D4068-15

    Specification for:Chlorinated Polyethylene (CPE) Sheeting for Concealed Water-Containment Membrane
  • ASTM D4097-01R10

    Specification for:Contact-Molded Glass-Fiber-Reinforced Thermoset Resin Corrosion-Resistant Tanks
  • ASTM D4161-14

    Specification for:“Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe Joints Using Flexible Elastomeric Seals
  • ASTM D4167-15

    Specification for:Fiber-Reinforced Plastic Fans and Blowers
  • ASTM D4226-11

    Test Methods for:Impact Resistance of Rigid Poly(Vinyl Chloride) (PVC) Building Products
  • ASTM D4350-15

    Test Method for:Corrosivity Index of Plastics and Fillers
  • ASTM D4398

    Test Method for:Determining the Chemical Resistance of Fiberglass-Reinforced Thermosetting Resins by One-Side Panel Exposure
  • ASTM D4477-09

    Specification for:Rigid (Unplasticized) Poly(Vinyl Chloride) (PVC) Soffit
  • ASTM D4495-12

    Test Method for:Impact Resistance of Poly(Vinyl Chloride) (PVC) Rigid Profiles by Means of a Falling Weight
  • ASTM D4549-15

    Classification System and Basis for Specification for:Polystyrene and Rubber-Modified Polystyrene Molding and Extrusion Materials (PS)
  • ASTM D4551-12

    Specification for:Poly(Vinyl Chloride) (PVC) Plastic Flexible Concealed Water-Containment Membrane
  • ASTM D4726-15

    Specification for:Rigid Poly(Vinyl Chloride) (PVC) Exterior-Profile Extrusions Used for Assembled Windows and Doors
  • ASTM D4756-15

    Practice for:Installation of Rigid Poly(Vinyl Chloride) (PVC) Siding and Soffit
  • ASTM D4803-10

    Test Method for:Predicting Heat Buildup in PVC Building Products
  • ASTM D4889-15

    Test Methods for:Polyurethane Raw Materials: Determination of Viscosity of Crude or Modified Isocyanates
  • ASTM D5023-15

    Test Method for:Plastics: Dynamic Mechanical Properties: In Flexure (Three-Point Bending)
  • ASTM D5024-15

    Test Method for:Plastics: Dynamic Mechanical Properties: In Compression
  • ASTM D5026-15

    Test Method for:Plastics: Dynamic Mechanical Properties: In Tension
  • ASTM D5117-09

    Test Method for:Dye Penetration of Solid Fiberglass Reinforced Pultruded Stock
  • ASTM D5132-11

    Test Method for:Horizontal Burning Rate of Polymeric Materials Used in Occupant Compartments of Motor Vehicles
  • ASTM D5138-11

    Classification System and Basis for Specification for:Liquid Crystal Polymers Molding and Extrusion Materials (LCP)
  • ASTM D5155-14E01

    Test Methods for:Polyurethane Raw Materials: Determination of the Isocyanate Content of Aromatic Isocyanates
  • ASTM D5203

    :
  • ASTM D5204-13

    Classification System for:Polyamide-Imide (PAI) Molding and Extrusion Materials
  • ASTM D5205-10

    Classification System and Basis for Specification for:Polyetherimide (PEI) Materials
  • ASTM D5206-13

    Test Method for:Windload Resistance of Rigid Plastic Siding
  • ASTM D5207-14

    Practice for:Confirmation of 20–mm (50–W) and 125–mm (500–W) Test Flames for Small-Scale Burning Tests on Plastic Materials
  • ASTM D5208-14

    Practice for:Fluorescent Ultraviolet (UV) Exposure of Photodegradable Plastics
  • ASTM D5210

    Test Method for:Determining the Anaerobic Biodegradation of Plastic Materials in the Presence of Municipal Sewage Sludge
  • ASTM D5224-12

    Practice for:Compression Molding Test Specimens of Thermosetting Molding Compounds
  • ASTM D5225-14

    Test Method for:Measuring Solution Viscosity of Polymers with a Differential Viscometer
  • ASTM D5226-98R10E01

    Practice for:Dissolving Polymer Materials
  • ASTM D5227-13

    Test Method for:Measurement of Hexane Extractable Content of Polyolefins
  • ASTM D5260-04R10

    Classification for:Chemical Resistance of Poly(Vinyl Chloride) (PVC) Homopolymer and Copolymer Compounds and Chlorinated Poly(Vinyl Chloride) (CPVC) Compounds
  • ASTM D5272-08R13

    Practice for:Outdoor Exposure Testing of Photodegradable Plastics
  • ASTM D5279-13

    Test Method for:Plastics: Dynamic Mechanical Properties: In Torsion
  • ASTM D5296-11

    Test Method for:Molecular Weight Averages and Molecular Weight Distribution of Polystyrene by High Performance Size-Exclusion Chromatography
  • ASTM D5319-12

    Specification for:Glass-Fiber Reinforced Polyester Wall and Ceiling Panels
  • ASTM D5336-15A

    Classification System and Basis for Specification for:Polyphthalamide (PPA) Injection Molding Materials
  • ASTM D5338-15

    Test Method for:Determining Aerobic Biodegradation of Plastic Materials Under Controlled Composting Conditions, Incorporating Thermophilic Temperatures
  • ASTM D5364-14

    Guide for:Design, Fabrication, and Erection of Fiberglass Reinforced (FRP) Plastic Chimney Liners with Coal-Fired Units
  • ASTM D5365-12

    Test Method for:Long-Term Ring-Bending Strain of “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe
  • ASTM D5418-15

    Test Method for:Plastics: Dynamic Mechanical Properties: In Flexure (Dual Cantilever Beam)
  • ASTM D5419-14A

    Test Method for:Environmental Stress Crack Resistance (ESCR) of Threaded Plastic Closures
  • ASTM D5420-10

    Test Method for:Impact Resistance of Flat, Rigid Plastic Specimen by Means of a Striker Impacted by a Falling Weight (Gardner Impact)
  • ASTM D5421-15

    Specification for:Contact Molded “Fiberglass” (Glass-Fiber-Reinforced Thermosetting Resin) Flanges
  • ASTM D5422-09

    Test Method for:Measurement of Properties of Thermoplastic Materials by Screw-Extrusion Capillary Rheometer
  • ASTM D5436-15

    Specification for:Cast Poly(Methyl Methacrylate) Plastic Rods, Tubes, and Shapes
  • ASTM D5477-11

    Practice for:Identification of Polymer Layers or Inclusions by Fourier Transform Infrared Microspectroscopy (FT-IR)
  • ASTM D5491-08R14

    Classification for:Recycled Post-Consumer Polyethylene Film Sources for Molding and Extrusion Materials
  • ASTM D5492-10

    Test Method for:Determination of Xylene Solubles in Propylene Plastics
  • ASTM D5507-99R12

    Test Method for:Determination of Trace Organic Impurities in Monomer Grade Vinyl Chloride by Capillary Column/Multidimensional Gas Chromatography
  • ASTM D5508-94AR09E01

    Test Method for:Determination of Residual Acrylonitrile Monomer in Styrene-Acrylonitrile Copolymer Resins and Nitrile-Butadiene Rubber by Headspace-Capillary Gas Chromatography (HS-CGC)
  • ASTM D5511-12

    Test Method for:Determining Anaerobic Biodegradation of Plastic Materials Under High-Solids Anaerobic-Digestion Conditions
  • ASTM D5523-15

    Test Method for:Polyurethane Raw Materials: Acidity by Argentometric Determination of Hydrolyzable Chlorine in Monomeric, Aromatic Isocyanates
  • ASTM D5526-12

    Test Method for:Determining Anaerobic Biodegradation of Plastic Materials Under Accelerated Landfill Conditions
  • ASTM D5575-07R13

    Classification System for:Copolymers of Vinylidene Fluoride (VDF) with Other Fluorinated Monomers
  • ASTM D5576-00R13

    Practice for:Determination of Structural Features in Polyolefins and Polyolefin Copolymers by Infrared Spectrophotometry (FT-IR)
  • ASTM D5577-94R10E01

    Guide for:Techniques to Separate and Identify Contaminants in Recycled Plastics
  • ASTM D5592-94R10

    Guide for:Material Properties Needed in Engineering Design Using Plastics
  • ASTM D5594-98R12

    Test Method for:Determination of the Vinyl Acetate Content of Ethylene-Vinyl Acetate (EVA) Copolymers by Fourier Transform Infrared Spectroscopy (FT-IR)
  • ASTM D5628-10

    Test Method for:Impact Resistance of Flat, Rigid Plastic Specimens by Means of a Falling Dart (Tup or Falling Mass)
  • ASTM D5629-11

    Test Method for:Polyurethane Raw Materials: Determination of Acidity in Low-Acidity Aromatic Isocyanates and Polyurethane Prepolymers
  • ASTM D5630-13

    Test Method for:Ash Content in Plastics
  • ASTM D5672_D5672M-15

    Test Method for:Testing Flexible Cellular Materials Measurement of Indentation Force Deflection Using a 25-mm [1-in.] Deflection Technique
  • ASTM D5675-13

    Classification for:Low Molecular Weight PTFE and FEP Micronized Powders
  • ASTM D5677-05R10

    Specification for:Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Pipe Fittings, Adhesive Bonded Joint Type, for Aviation Jet Turbine Fuel Lines
  • ASTM D5685-11

    Specification for:“Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pressure Pipe Fittings
  • ASTM D5740-11

    Guide for:Writing Material Standards in the Classification Format
  • ASTM D5813-04R12

    Specification for:Cured-In-Place Thermosetting Resin Sewer Piping Systems
  • ASTM D5814-10

    Practice for:Determination of Contamination in Recycled Poly(Ethylene Terephthalate) (PET) Flakes and Chips Using a Plaque Test
  • ASTM D5857-15

    Specification for:Polypropylene Injection and Extrusion Materials Using ISO Protocol and Methodology
  • ASTM D5870-11

    Practice for:Calculating Property Retention Index of Plastics
  • ASTM D5926-15

    Specification for:Poly (Vinyl Chloride) (PVC) Gaskets for Drain, Waste, and Vent (DWV), Sewer, Sanitary, and Storm Plumbing Systems
  • ASTM D5927-14

    Classification System for andBasis for Specifications for:Thermoplastic Polyester (TPES) Injection and Extrusion Materials Based on ISO Test Methods
  • ASTM D5930-09

    Test Method for:Thermal Conductivity of Plastics by Means of a Transient Line-Source Technique
  • ASTM D5946-09

    Test Method for:Corona-Treated Polymer Films Using Water Contact Angle Measurements
  • ASTM D5947-11

    Test Methods for:Physical Dimensions of Solid Plastics Specimens
  • ASTM D5948-05R12

    Specification for:Molding Compounds, Thermosetting
  • ASTM D5988-12

    Test Method for:Determining Aerobic Biodegradation of Plastic Materials in Soil
  • ASTM D5989-14A

    Specification for:Extruded and Monomer Cast Shapes Made from Nylon (PA)
  • ASTM D5991-15

    Practice for:Separation and Identification of Poly(Vinyl Chloride) (PVC) Contamination in Poly(Ethylene Terephthalate) (PET) Flake
  • ASTM D5998-10

    Specification for:Molded Polyethylene Shipping and Storage Drums
  • ASTM D6040-12

    Guide to:Standard Test Methods for Unsintered Polytetrafluoroethylene (PTFE) Extruded Film or Tape
  • ASTM D6041-11

    Specification for:Contact-Molded “Fiberglass” (Glass-Fiber-Reinforced Thermosetting Resin) Corrosion Resistant Pipe and Fittings
  • ASTM D6042-09

    Test Method for:Determination of Phenolic Antioxidants and Erucamide Slip Additives in Polypropylene Homopolymer Formulations Using Liquid Chromatography (LC)
  • ASTM D6068-10

    Test Method for:Determining J-R Curves of Plastic Materials
  • ASTM D6098-10

    Specification for:Extruded and Compression Molded Shapes Made from Polycarbonate (PC)
  • ASTM D6099-13

    Test Method for:Polyurethane Raw Materials: Determination of Acidity in Moderate to High Acidity Aromatic Isocyanates
  • ASTM D6100-14

    Specification for:Extruded, Compression Molded and Injection Molded Polyoxymethylene Shapes (POM)
  • ASTM D6108-13

    Test Method for:Compressive Properties of Plastic Lumber and Shapes
  • ASTM D6109-13

    Test Methods for:Flexural Properties of Unreinforced and Reinforced Plastic Lumber and Related Products
  • ASTM D6110-10

    Test Method for:Determining the Charpy Impact Resistance of Notched Specimens of Plastics
  • ASTM D6111-13A

    Test Method for:Bulk Density And Specific Gravity of Plastic Lumber and Shapes by Displacement
  • ASTM D6112-13

    Test Methods for:Compressive and Flexural Creep and Creep-Rupture of Plastic Lumber and Shapes
  • ASTM D6117-13E01

    Test Methods for:Mechanical Fasteners in Plastic Lumber and Shapes
  • ASTM D6150-15

    Test Method for:Estimating Processing Losses of Plastisols and Organosols Due to Volatility
  • ASTM D6226-15

    Test Method for:Open Cell Content of Rigid Cellular Plastics
  • ASTM D6247-10

    Test Method for:Determination of Elemental Content of Polyolefins by Wavelength Dispersive X-ray Fluorescence Spectrometry
  • ASTM D6248-98R12E01

    Test Method for:Vinyl and Trans Unsaturation in Polyethylene by Infrared Spectrophotometry
  • ASTM D6261-14

    Specification for:Extruded and Compression Molded Basic Shapes Made from Thermoplastic Polyester (TPES)
  • ASTM D6262-12

    Specification for:Extruded, Compression Molded, and Injection Molded Basic Shapes of Poly(aryl ether ketone) (PAEK)
  • ASTM D6263-15

    Specification for:Extruded Rods and Bars Made From Rigid Poly(Vinyl Chloride) (PVC) and Chlorinated Poly(Vinyl Chloride) (CPVC)
  • ASTM D6265-15

    Practice for:Separation of Contaminants in Polymers Using an Extruder Filter Test
  • ASTM D6272-10

    Test Method for:Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials by Four-Point Bending
  • ASTM D6287-09

    Practice for:Cutting Film and Sheeting Test Specimens
  • ASTM D6288-15

    Practice for:Separation and Washing of Recycled Plastics Prior to Testing
  • ASTM D6289-13

    Test Method for:Measuring Shrinkage from Mold Dimensions of Molded Thermosetting Plastics
  • ASTM D6290-13

    Test Method for:Color Determination of Plastic Pellets
  • ASTM D6338-10

    Classification System for:Highly Crosslinked Thermoplastic Vulcanizates (HCTPVs) Based on ASTM Standard Test Methods
  • ASTM D6339-11

    Classification System for and Basis for Specifications for:Syndiotactic Polystyrene Molding and Extrusion (SPS)
  • ASTM D6340

    Test Methods for:Determining Aerobic Biodegradation of Radiolabeled Plastic Materials in an Aqueous or Compost Environment
  • ASTM D6341-14A

    Test Method for:Determination of the Linear Coefficient of Thermal Expansion of Plastic Lumber and Plastic Lumber Shapes Between –30 and 140°F (–34.4 and 60°C)
  • ASTM D6342-12

    Practice for:Polyurethane Raw Materials: Determining Hydroxyl Number of Polyols by Near Infrared (NIR) Spectroscopy
  • ASTM D6358-11

    Classification System and Basis for Specification for:Poly (Phenylene Sulfide) (PPS) Injection Molding and Extrusion Materials Using ISO Methods
  • ASTM D6360-15

    Practice for:Enclosed Carbon-Arc Exposures of Plastics
  • ASTM D6394-14

    Specification for:Sulfone Plastics (SP)
  • ASTM D6395-11

    Test Method for:Flatwise Flexural Impact Resistance of Rigid Plastics
  • ASTM D6400-12

    Specification for:Labeling of Plastics Designed to be Aerobically Composted in Municipal or Industrial Facilities
  • ASTM D6436-14

    Guide for:Reporting Properties for Plastics and Thermoplastic Elastomers
  • ASTM D6437-05R10E01

    Test Method for:Polyurethane Raw Materials: Alkalinity in Low-Alkalinity Polyols (Determination of CPR Values of Polyols)
  • ASTM D6456-10

    Specification for:Finished Parts Made from Polyimide Resin
  • ASTM D6457-08R13

    Specification for:Extruded and Compression Molded Rod and Heavy-Walled Tubing Made from Polytetrafluoroethylene (PTFE)
  • ASTM D6474-12

    Test Method for:Determining Molecular Weight Distribution and Molecular Weight Averages of Polyolefins by High Temperature Gel Permeation Chromatography
  • ASTM D6576-13

    Specification for:Flexible Cellular Rubber Chemically Blown
  • ASTM D6585-11

    Specification for:Unsintered Polytetrafluoroethylene (PTFE) Extruded Film or Tape
  • ASTM D6645-01R10

    Test Method for:Methyl (Comonomer) Content in Polyethylene by Infrared Spectrophotometry
  • ASTM D6662-13

    Specification for:Polyolefin-Based Plastic Lumber Decking Boards
  • ASTM D6691-09

    Test Method for:Determining Aerobic Biodegradation of Plastic Materials in the Marine Environment by a Defined Microbial Consortium or Natural Sea Water Inoculum
  • ASTM D6712-01R09

    Specification for:Ultra-High-Molecular-Weight Polyethylene (UHMW-PE) Solid Plastic Shapes
  • ASTM D6713-14

    Specification for:Extruded and Compression Molded Shapes Made from Poly(Vinylidene Fluoride) (PVDF)
  • ASTM D6777-02R10E01

    Test Method for:Relative Rigidity of Poly(Vinyl Chloride)(PVC) Siding
  • ASTM D6778-14

    Classification System and Basis for Specification for:Polyoxymethylene Molding and Extrusion Materials (POM)
  • ASTM D6779-12A

    Classification System for and Basis of Specification for:Polyamide Molding and Extrusion Materials (PA)
  • ASTM D6783-05R11

    Specification for:Polymer Concrete Pipe
  • ASTM D6835-08R14

    Classification System for:Thermoplastic Elastomer-Ether-Ester Molding and Extrusion Materials (TEEE)
  • ASTM D6864-11

    Specification for:Color and Appearance Retention of Solid Colored Plastic Siding Products
  • ASTM D6865-11

    Classification System and Basis for Specifications for:Acrylonitrile–Styrene–Acrylate (ASA) and Acrylonitrile–EPDM–Styrene (AES) Plastics and Alloys Molding and Extrusion Materials
  • ASTM D6866-12

    Test Methods for:Determining the Biobased Content of Solid, Liquid, and Gaseous Samples Using Radiocarbon Analysis
  • ASTM D6867-03R14

    Specification for:Perfluoroalkoxy (PFA)-Fluoropolymer Tubing
  • ASTM D6868-11

    Specification for:Labeling of End Items that Incorporate Plastics and Polymers as Coatings or Additives with Paper and Other Substrates Designed to be Aerobically Composted in Municipal or Industrial Facilities
  • ASTM D6869-03R11

    Test Method for:Coulometric and Volumetric Determination of Moisture in Plastics Using the Karl Fischer Reaction (the Reaction of Iodine with Water)
  • ASTM D6953-11

    Test Method for:Determination of Antioxidants and Erucamide Slip Additives in Polyethylene Using Liquid Chromatography (LC)
  • ASTM D6954-04R13

    Guide for:Exposing and Testing Plastics that Degrade in the Environment by a Combination of Oxidation and Biodegradation
  • ASTM D6979-13

    Test Method for:Polyurethane Raw Materials: Determination of Basicity in Polyols, Expressed as Percent Nitrogen
  • ASTM D6980-12

    Test Method for:Determination of Moisture in Plastics by Loss in Weight
  • ASTM D6988-13

    Guide for:Determination of Thickness of Plastic Film Test Specimens
  • ASTM D7026-13

    Guide for:Sampling and Reporting of Results for Determination of Percent Biobased Content of Materials via Carbon Isotope Analysis
  • ASTM D7027-13

    Test Method for:Evaluation of Scratch Resistance of Polymeric Coatings and Plastics Using an Instrumented Scratch Machine
  • ASTM D7029-09

    Test Method for:Determination of Reactivity of Unsaturated Polyesters and Vinyl Esters at 180.0°F (82.2°C)
  • ASTM D7075

    Practice for:Evaluating and Reporting Environmental Performance of Biobased Products
  • ASTM D7081

    Specification for:Non-Floating Biodegradable Plastics in the Marine Environment
  • ASTM D7082-15

    Specification for:Polyethylene Stay In Place Form System for End Walls for Drainage Pipe
  • ASTM D7083-04R10E01

    Practice for:Determination of Monomeric Plasticizers in Poly (Vinyl Chloride) (PVC) by Gas Chromatography
  • ASTM D7107-04R10

    Test Method for:Creep Measurement of Self-Lubricating Bushings
  • ASTM D7132-14

    Test Method for:Determination of Retained Blowing Agent in Extruded Polystyrene Foam
  • ASTM D7133-11

    Test Method for:Polyurethane Raw Materials: Instrumental Measurement of Tristimulus CIELAB Color and Yellowness Index of Liquids
  • ASTM D7134-05R12

    Test Method for:Molecular Mass Averages and Molecular Mass Distribution of Atactic Polystyrene by Matrix Assisted Laser Desorption/Ionization (MALDI)-Time of Flight (TOF) Mass Spectrometry (MS)
  • ASTM D7191-10

    Test Method for:Determination of Moisture in Plastics by Relative Humidity Sensor
  • ASTM D7192-10

    Test Method for:High Speed Puncture Properties of Plastic Films Using Load and Displacement Sensors
  • ASTM D7193-11

    Specification for:Unsintered Pigmented Polytetrafluoroethylene (PTFE) Extruded Film or Tape
  • ASTM D7194-12

    Specification for:Aerospace Parts Machined from Polychlorotrifluoroethylene (PCTFE)
  • ASTM D7209

    Guide for:Waste Reduction, Resource Recovery, and Use of Recycled Polymeric Materials and Products
  • ASTM D7210-13

    Practice for:Extraction of Additives in Polyolefin Plastics
  • ASTM D7211-13

    Specification for:Parts Machined from Polychlorotrifluoroethylene (PCTFE) and Intended for General Use
  • ASTM D7251-11

    Specification for:Color and Appearance Retention of Variegated Color Plastic Siding Products
  • ASTM D7252-06R11E01

    Test Method for:Polyurethane Raw Materials: Determination of Monomer and Isomers in Isocyanates
  • ASTM D7253-06R11E01

    Test Method for:Polyurethane Raw Materials: Determination of Acidity as Acid Number for Polyether Polyols
  • ASTM D7254-15

    Specification for:Polypropylene (PP) Siding
  • ASTM D7258-14

    Specification for:Polymeric Piles
  • ASTM D7292-12

    Specification for:Extruded, Compression-Molded, and Injection-Molded Basic Shapes of Polyamide-Imide (PAI)
  • ASTM D7293-12

    Specification for:Extruded and Compression-Molded Shapes Made from Polyetherimide (PEI)
  • ASTM D7309-13

    Test Method for:Determining Flammability Characteristics of Plastics and Other Solid Materials Using Microscale Combustion Calorimetry
  • ASTM D7310-11

    Guide for:Defect Detection and Rating of Plastic Films Using Optical Sensors
  • ASTM D7399-08

    Test Method for:Determination of the Amount of Polypropylene (PP) in Polypropylene/LDPE Mixtures Using Infrared Spectrophotometer (FTIR)
  • ASTM D7436-12

    Classification System for:Unfilled Polyethylene Plastics Molding and Extrusion Materials with a Fractional Melt Index Using ISO Protocol and Methodology
  • ASTM D7444-11

    Practice for:Heat and Humidity Aging of Oxidatively Degradable Plastics
  • ASTM D7445-09

    Specification for:Rigid Poly(Vinyl Chloride) (PVC) Siding with Foam Plastic Backing (Backed Vinyl Siding)
  • ASTM D7471-09R14

    Specification for:CPT-Fluoropolymer Molding and Extrusion Materials
  • ASTM D7472-09R14

    Specification for:EFEP-Fluoropolymer Molding and Extrusion Materials
  • ASTM D7473-12

    Test Method for:Weight Attrition of Plastic Materials in the Marine Environment by Open System Aquarium Incubations
  • ASTM D7474-12

    Practice for:Determining Residual Stresses in Extruded or Molded Sulfone Plastic (SP) Parts by Immersion in Various Chemical Reagents
  • ASTM D7475-11

    Test Method for:Determining the Aerobic Degradation and Anaerobic Biodegradation of Plastic Materials under Accelerated Bioreactor Landfill Conditions
  • ASTM D7486-14

    Test Method for:Measurement of Fines and Dust Particles on Plastic Pellets by Wet Analysis
  • ASTM D7487-13

    Practice for:Polyurethane Raw Materials: Polyurethane Foam Cup Test
  • ASTM D7567

    Test Method for:Determining Gel Content in Crosslinked Ethylene Plastics Using Pressurized Liquid Extraction
  • ASTM D7568-13

    Specification for:Polyethylene-Based Structural-Grade Plastic Lumber for Outdoor Applications
  • ASTM D7611_D7611M-13E01

    Practice for:Coding Plastic Manufactured Articles for Resin Identification
  • ASTM D7710-14

    Test Method for:Determination of Volume and Density of Rigid and Irregularly Shaped Molded Cellular Materials
  • ASTM D7711-11R15

    Guide for:Description of Polymer Pellet Defects
  • ASTM D7745-11

    Practice for:Testing Pultruded Composites
  • ASTM D7774-12

    Test Method for:Flexural Fatigue Properties of Plastics
  • ASTM D7791-12

    Test Method for:Uniaxial Fatigue Properties of Plastics
  • ASTM D7792_D7792M-15

    Practice for:Freeze/Thaw Conditioning of Pultruded Fiber Reinforced Polymer (FRP) Composites Used in Structural Designs
  • ASTM D7793-13

    Specification for:Insulated Vinyl Siding
  • ASTM D7823-14

    Test Method for:Determination of Low Level, Regulated Phthalates in Poly (Vinyl Chloride) Plastics by Thermal Desorption—Gas Chromatography/Mass Spectrometry
  • ASTM D7856-15A

    Specification for:Color and Appearance Retention of Solid and Variegated Color Plastic Siding Products using CIELab Color Space
  • ASTM D7990-15

    Test Method for:Using Reflectance Spectra to Produce an Index of Temperature Rise in Polymeric Siding
  • ASTM D7991-15

    Test Method for:Determining Aerobic Biodegradation of Plastics Buried in Sandy Marine Sediment under Controlled Laboratory Conditions
  • ASTM D7992_D7992M-15

    Practice for:Elevated Temperature and Moisture Conditioning of Pultruded Fiber Reinforced Polymer (FRP) Composites Used in Structural Designs
  • ASTM D7993-15

    Guide for:Analyzing Complex Phthalates
  • ASTM D7997-15

    Practice for:Polyurethane Raw Materials: Gel Tests for Polyurethane Non-Foam Formulations
  • ASTM D8019-15

    Test Methods for:Determining the Full Section Flexural Modulus and Bending Strength of Fiber Reinforced Polymer Crossarms Assembled with Center Mount Brackets