한국표준정보망(KSSN)

ASTM Annual Book 수록 리스트

핸드북  >  ASTM

    08.04 : 플라스틱 파이프 및 건축용 제품

  • ASTM D1527

    Specification for:Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe, Schedules 40 and 80
  • ASTM D1598-15A

    Test Method for:Time-to-Failure of Plastic Pipe Under Constant Internal Pressure
  • ASTM D1599-14E01

    Test Method for:Resistance to Short-Time Hydraulic Pressure of Plastic Pipe, Tubing, and Fittings
  • ASTM D1785-15

    Specification for:Poly(Vinyl Chloride) (PVC) Plastic Pipe, Schedules 40, 80, and 120
  • ASTM D2122-15

    Test Method for:Determining Dimensions of Thermoplastic Pipe and Fittings
  • ASTM D2152-13

    Test Method for:Adequacy of Fusion of Extruded Poly(Vinyl Chloride) (PVC) Pipe and Molded Fittings by Acetone Immersion
  • ASTM D2235-04R11

    Specification for:Solvent Cement for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe and Fittings
  • ASTM D2239-12A

    Specification for:Polyethylene (PE) Plastic Pipe (SIDR-PR) Based on Controlled Inside Diameter
  • ASTM D2241-15

    Specification for:Poly(Vinyl Chloride) (PVC) Pressure-Rated Pipe (SDR Series)
  • ASTM D2290-12

    Test Method for:Apparent Hoop Tensile Strength of Plastic or Reinforced Plastic Pipe
  • ASTM D2321-14E01

    Practice for:Underground Installation of Thermoplastic Pipe for Sewers and Other Gravity-Flow Applications
  • ASTM D2412-11

    Test Method for:Determination of External Loading Characteristics of Plastic Pipe by Parallel-Plate Loading
  • ASTM D2444-99R10

    Test Method for:Determination of the Impact Resistance of Thermoplastic Pipe and Fittings by Means of a Tup (Falling Weight)
  • ASTM D2464-15

    Specification for:Threaded Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 80
  • ASTM D2466-15

    Specification for:Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 40
  • ASTM D2467-15

    Specification for:Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 80
  • ASTM D2513-14E01

    Specification for:Polyethylene (PE) Gas Pressure Pipe, Tubing, and Fittings
  • ASTM D2564-12

    Specification for:Solvent Cements for Poly(Vinyl Chloride) (PVC) Plastic Piping Systems
  • ASTM D2609-15

    Specification for:Plastic Insert Fittings for Polyethylene (PE) Plastic Pipe
  • ASTM D2657-07R15

    Practice for:Heat Fusion Joining of Polyolefin Pipe and Fittings
  • ASTM D2661-14

    Specification for:Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe and Fittings
  • ASTM D2665-14

    Specification for:Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings
  • ASTM D2672-14

    Specification for:Joints for IPS PVC Pipe Using Solvent Cement
  • ASTM D2680-01R14

    Specification for:Acrylonitrile-Butadiene-Styrene (ABS) and Poly(Vinyl Chloride) (PVC) Composite Sewer Piping
  • ASTM D2683-14

    Specification for:Socket-Type Polyethylene Fittings for Outside Diameter-Controlled Polyethylene Pipe and Tubing
  • ASTM D2729-11

    Specification for:Poly(Vinyl Chloride) (PVC) Sewer Pipe and Fittings
  • ASTM D2737-12A

    Specification for:Polyethylene (PE) Plastic Tubing
  • ASTM D2749-13

    Symbols for:Dimensions of Plastic Pipe Fittings
  • ASTM D2751

    Specification for:Acrylonitrile-Butadiene-Styrene (ABS) Sewer Pipe and Fittings
  • ASTM D2774-12

    Practice for:Underground Installation of Thermoplastic Pressure Piping
  • ASTM D2837-13E01

    Test Method for:Obtaining Hydrostatic Design Basis for Thermoplastic Pipe Materials or Pressure Design Basis for Thermoplastic Pipe Products
  • ASTM D2846_D2846M-14

    Specification for:Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Hot- and Cold-Water Distribution Systems
  • ASTM D2852-95R08

    Specification for:Styrene-Rubber (SR) Plastic Drain Pipe and Fittings
  • ASTM D2855-15

    Practice for:the Two-Step (Primer and Solvent Cement) Method of Joining Poly (Vinyl Chloride) (PVC) or Chlorinated Poly (Vinyl Chloride) (CPVC) Pipe and Piping Components with Tapered Sockets
  • ASTM D2949-10

    Specification for:3.25-in. Outside Diameter Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings
  • ASTM D3034-15

    Specification for:Type PSM Poly(Vinyl Chloride) (PVC) Sewer Pipe and Fittings
  • ASTM D3035-15

    Specification for:Polyethylene (PE) Plastic Pipe (DR-PR) Based on Controlled Outside Diameter
  • ASTM D3122-15

    Specification for:Solvent Cements for Styrene-Rubber (SR) Plastic Pipe and Fittings
  • ASTM D3138-04R11

    Specification for:Solvent Cements for Transition Joints Between Acrylonitrile-Butadiene-Styrene (ABS) and Poly(Vinyl Chloride) (PVC) Non-Pressure Piping Components
  • ASTM D3139-98R11

    Specification for:Joints for Plastic Pressure Pipes Using Flexible Elastomeric Seals
  • ASTM D3212-07R13

    Specification for:Joints for Drain and Sewer Plastic Pipes Using Flexible Elastomeric Seals
  • ASTM D3261-15

    Specification for:Butt Heat Fusion Polyethylene (PE) Plastic Fittings for Polyethylene (PE) Plastic Pipe and Tubing
  • ASTM D3311-11

    Specification for:Drain, Waste, and Vent (DWV) Plastic Fittings Patterns
  • ASTM D3485-15

    Specification for:Coilable High Density Polyethylene (HDPE) Cable in Conduit (CIC)
  • ASTM D6070-02R10

    Test Methods for:Physical Properties of Smooth-Wall, Coilable, Polyethylene (PE) Conduit (Duct) for Preassembled Wire and Cable
  • ASTM F0402-05R12

    Practice for:Safe Handling of Solvent Cements, Primers, and Cleaners Used for Joining Thermoplastic Pipe and Fittings
  • ASTM F0405

    Specification for:Corrugated Polyethylene (PE) Pipe and Fittings
  • ASTM F0409-12

    Specification for:Thermoplastic Accessible and Replaceable Plastic Tube and Tubular Fittings
  • ASTM F0412-15

    Terminology Relating to:Plastic Piping Systems
  • ASTM F0437-15

    Specification for:Threaded Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 80
  • ASTM F0438-15

    Specification for:Socket-Type Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 40
  • ASTM F0439-13

    Specification for:Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 80
  • ASTM F0441_F0441M-15

    Specification for:Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe, Schedules 40 and 80
  • ASTM F0442_F0442M-13E01

    Specification for:Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe (SDR–PR)
  • ASTM F0449-02R14

    Practice for:Subsurface Installation of Corrugated Polyethylene Pipe for Agricultural Drainage or Water Table Control
  • ASTM F0477-14

    Specification for:Elastomeric Seals (Gaskets) for Joining Plastic Pipe
  • ASTM F0480-14

    Specification for:Thermoplastic Well Casing Pipe and Couplings Made in Standard Dimension Ratios (SDR), SCH 40 and SCH 80
  • ASTM F0481-97R14

    Practice for:Installation of Thermoplastic Pipe and Corrugated Pipe in Septic Tank Leach Fields
  • ASTM F0493-14

    Specification for:Solvent Cements for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe and Fittings
  • ASTM F0512-12

    Specification for:Smooth-Wall Poly(Vinyl Chloride) (PVC) Conduit and Fittings for Underground Installation
  • ASTM F0585-13

    Guide for:Insertion of Flexible Polyethylene Pipe Into Existing Sewers
  • ASTM F0610_F0610M-15

    Practice for:Evaluating the Quality of Molded Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings by the Heat Reversion Technique
  • ASTM F0628-12E01

    Specification for:Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe With a Cellular Core
  • ASTM F0645-15A

    Guide for:Selection, Design, and Installation of Thermoplastic Water- Pressure Piping Systems
  • ASTM F0656-15

    Specification for:Primers for Use in Solvent Cement Joints of Poly(Vinyl Chloride) (PVC) Plastic Pipe and Fittings
  • ASTM F0667_F0667M-15

    Specification for:3 through 24 in. Corrugated Polyethylene Pipe and Fittings
  • ASTM F0679-15

    Specification for:Poly(Vinyl Chloride) (PVC) Large-Diameter Plastic Gravity Sewer Pipe and Fittings
  • ASTM F0689-97R11

    Practice for:Determination of the Temperature of Above-Ground Plastic Gas Pressure Pipe Within Metallic Casings
  • ASTM F0714-13

    Specification for:Polyethylene (PE) Plastic Pipe (DR-PR) Based on Outside Diameter
  • ASTM F0725-03R13

    Practice for:Drafting Impact Test Requirements In Thermoplastic Pipe And Fittings Standards
  • ASTM F0758-14

    Specification for:Smooth-Wall Poly(Vinyl Chloride) (PVC) Plastic Underdrain Systems for Highway, Airport, and Similar Drainage
  • ASTM F0771

    Specification for:Polyethylene (PE) Thermoplastic High-Pressure Irrigation Pipeline Systems
  • ASTM F0794-03R14

    Specification for:Poly(Vinyl Chloride) (PVC) Profile Gravity Sewer Pipe and Fittings Based on Controlled Inside Diameter
  • ASTM F0810-12

    Specification for:Smoothwall Polyethylene (PE) Pipe for Use in Drainage and Waste Disposal Absorption Fields
  • ASTM F0876-15A

    Specification for:Crosslinked Polyethylene (PEX) Tubing
  • ASTM F0877-11A

    Specification for:Crosslinked Polyethylene (PEX) Hot- and Cold-Water Distribution Systems
  • ASTM F0891-10

    Specification for:Coextruded Poly(Vinyl Chloride) (PVC) Plastic Pipe With a Cellular Core
  • ASTM F0894-13

    Specification for:Polyethylene (PE) Large Diameter Profile Wall Sewer and Drain Pipe
  • ASTM F0905-04R11

    Practice for:Qualification of Polyethylene Saddle-Fused Joints
  • ASTM F0913-02R14

    Specification for:Thermoplastic Elastomeric Seals (Gaskets) for Joining Plastic Pipe
  • ASTM F0948-94R11

    Test Method for:Time-to-Failure of Plastic Piping Systems and Components Under Constant Internal Pressure With Flow
  • ASTM F0949-15

    Specification for:Poly(Vinyl Chloride) (PVC) Corrugated Sewer Pipe With a Smooth Interior and Fittings
  • ASTM F1025-94R11

    Guide for:Selection and Use of Full-Encirclement-Type Band Clamps for Reinforcement or Repair of Punctures or Holes in Polyethylene Gas Pressure Pipe
  • ASTM F1041-02R08

    Guide for:Squeeze-Off of Polyolefin Gas Pressure Pipe and Tubing
  • ASTM F1055-15

    Specification for:Electrofusion Type Polyethylene Fittings for Outside Diameter Controlled Polyethylene and Crosslinked Polyethylene (PEX) Pipe and Tubing
  • ASTM F1056-04R11

    Specification for:Socket Fusion Tools for Use in Socket Fusion Joining Polyethylene Pipe or Tubing and Fittings
  • ASTM F1057-10

    Practice for:Estimating the Quality of Extruded Poly (Vinyl Chloride) (PVC) Pipe by the Heat Reversion Technique
  • ASTM F1216-09

    Practice for:Rehabilitation of Existing Pipelines and Conduits by the Inversion and Curing of a Resin-Impregnated Tube
  • ASTM F1281-11

    Specification for:Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene (PEX-AL-PEX) Pressure Pipe
  • ASTM F1282-10

    Specification for:Polyethylene/Aluminum/Polyethylene (PE-AL-PE) Composite Pressure Pipe
  • ASTM F1290-98AR11

    Practice for:Electrofusion Joining Polyolefin Pipe and Fittings
  • ASTM F1336-15

    Specification for:Poly(Vinyl Chloride) (PVC) Gasketed Sewer Fittings
  • ASTM F1365-91R13

    Test Method for:Water Infiltration Resistance of Plastic Underground Conduit Joints Which Use Flexible Elastomeric Seals
  • ASTM F1412-09

    Specification for:Polyolefin Pipe and Fittings for Corrosive Waste Drainage Systems
  • ASTM F1417-11AR15

    Practice for:Installation Acceptance of Plastic Non-pressure Sewer Lines Using Low-Pressure Air
  • ASTM F1429-99R14

    Test Method for:Assembly Force of Plastic Underground Conduit Joints That Use Flexible Elastomeric Seals Located in the Bell
  • ASTM F1473-13

    Test Method for:Notch Tensile Test to Measure the Resistance to Slow Crack Growth of Polyethylene Pipes and Resins
  • ASTM F1483-15

    Specification for:Oriented Poly(Vinyl Chloride), PVCO, Pressure Pipe
  • ASTM F1488-14

    Specification for:Coextruded Composite Pipe
  • ASTM F1498-08R12E01

    Specification for:Taper Pipe Threads 60° for Thermoplastic Pipe and Fittings
  • ASTM F1499-12

    Specification for:Coextruded Composite Drain, Waste, and Vent Pipe (DWV)
  • ASTM F1504-14

    Specification for:Folded Poly(Vinyl Chloride) (PVC) Pipe for Existing Sewer and Conduit Rehabilitation
  • ASTM F1533-01R09

    Specification for:Deformed Polyethylene (PE) Liner
  • ASTM F1545-15A

    Specification for:Plastic-Lined Ferrous Metal Pipe, Fittings, and Flanges
  • ASTM F1563-01R11

    Specification for:Tools to Squeeze-off Polyethylene (PE) Gas Pipe or Tubing
  • ASTM F1588-96R15

    Test Method for:Constant Tensile Load Joint Test (CTLJT)
  • ASTM F1606-05R14

    Practice for:Rehabilitation of Existing Sewers and Conduits with Deformed Polyethylene (PE) Liner
  • ASTM F1668-08

    Guide for:Construction Procedures for Buried Plastic Pipe
  • ASTM F1673-10

    Specification for:Polyvinylidene Fluoride (PVDF) Corrosive Waste Drainage Systems
  • ASTM F1674-11

    Test Method for:Joint Restraint Products for Use with PVC Pipe
  • ASTM F1675-13

    Practice for:Life-Cycle Cost Analysis of Plastic Pipe Used for Culverts, Storm Sewers, and Other Buried Conduits
  • ASTM F1697-09R15

    Specification for:Poly(Vinyl Chloride) (PVC) Profile Strip for Machine Spiral-Wound Liner Pipe Rehabilitation of Existing Sewers and Conduit
  • ASTM F1698-02R15

    Practice for:Installation of Poly(Vinyl Chloride)(PVC) Profile Strip Liner and Cementitious Grout for Rehabilitation of Existing Man-Entry Sewers and Conduits
  • ASTM F1732-12

    Specification for:Poly(Vinyl Chloride) (PVC) Sewer and Drain Pipe Containing Recycled PVC Material
  • ASTM F1733-13

    Specification for:Butt Heat Fusion Polyamide(PA) Plastic Fitting for Polyamide(PA) Plastic Pipe and Tubing
  • ASTM F1734-03R09

    Practice for:Qualification of a Combination of Squeeze Tool, Pipe, and Squeeze-Off Procedures to Avoid Long-Term Damage in Polyethylene (PE) Gas Pipe
  • ASTM F1735-09R15

    Specification for:Poly (Vinyl Chloride) (PVC) Profile Strip for PVC Liners for Rehabilitation of Existing Man-Entry Sewers and Conduits
  • ASTM F1741-08

    Practice for:Installation of Machine Spiral Wound Poly (Vinyl Chloride) (PVC) Liner Pipe for Rehabilitation of Existing Sewers and Conduits
  • ASTM F1743-08

    Practice for:Rehabilitation of Existing Pipelines and Conduits by Pulled-in-Place Installation of Cured-in-Place Thermosetting Resin Pipe (CIPP)
  • ASTM F1759-97R10

    Practice for:Design of High-Density Polyethylene (HDPE) Manholes for Subsurface Applications
  • ASTM F1760-01R11

    Specification for:Coextruded Poly(Vinyl Chloride) (PVC) Non-Pressure Plastic Pipe Having Reprocessed-Recycled Content
  • ASTM F1802-04R10

    Test Method for:Performance Testing of Excess Flow Valves
  • ASTM F1803-15

    Specification for:Poly (Vinyl Chloride)(PVC) Closed Profile Gravity Pipe and Fittings Based on Controlled Inside Diameter 
  • ASTM F1804-08R12

    Practice for:Determining Allowable Tensile Load for Polyethylene (PE) Gas Pipe During Pull-In Installation
  • ASTM F1807-15

    Specification for:Metal Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-linked Polyethylene (PEX) Tubing and SDR9 Polyethylene of Raised Temperature (PE-RT) Tubing
  • ASTM F1865-09

    Specification for:Mechanical Cold Expansion Insert Fitting With Compression Sleeve for Cross-linked Polyethylene (PEX) Tubing
  • ASTM F1866-13

    Specification for:Poly (Vinyl Chloride) (PVC) Plastic Schedule 40 Drainage and DWV Fabricated Fittings
  • ASTM F1867-06R12

    Practice for:Installation of Folded/Formed Poly (Vinyl Chloride) (PVC) Pipe Type A for Existing Sewer and Conduit Rehabilitation
  • ASTM F1871-11

    Specification for:Folded/Formed Poly (Vinyl Chloride) Pipe Type A for Existing Sewer and Conduit Rehabilitation
  • ASTM F1901-10

    Specification for:Polyethylene (PE) Pipe and Fittings for Roof Drain Systems
  • ASTM F1924-12

    Specification for:Plastic Mechanical Fittings for Use on Outside Diameter Controlled Polyethylene Gas Distribution Pipe and Tubing
  • ASTM F1947-10

    Practice for:Installation of Folded Poly (Vinyl Chloride) (PVC) Pipe into Existing Sewers and Conduits
  • ASTM F1948-12

    Specification for:Metallic Mechanical Fittings for Use on Outside Diameter Controlled Thermoplastic Gas Distribution Pipe and Tubing
  • ASTM F1960-15

    Specification for:Cold Expansion Fittings with PEX Reinforcing Rings for Use with Cross-linked Polyethylene (PEX) Tubing
  • ASTM F1961-09

    Specification for:Metal Mechanical Cold Flare Compression Fittings with Disc Spring for Crosslinked Polyethylene (PEX) Tubing
  • ASTM F1962-11

    Guide for:Use of Maxi-Horizontal Directional Drilling for Placement of Polyethylene Pipe or Conduit Under Obstacles, Including River Crossings
  • ASTM F1970-12E01

    Specification for:Special Engineered Fittings, Appurtenances or Valves for use in Poly (Vinyl Chloride) (PVC) or Chlorinated Poly (Vinyl Chloride) (CPVC) Systems
  • ASTM F1973-13E01

    Specification for:Factory Assembled Anodeless Risers and Transition Fittings in Polyethylene (PE) and Polyamide 11 (PA11) and Polyamide 12 (PA12) Fuel Gas Distribution Systems
  • ASTM F1974-09R15

    Specification for:Metal Insert Fittings for Polyethylene/Aluminum/Polyethylene and Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene Composite Pressure Pipe
  • ASTM F1986-01R11

    Specification for:Multilayer Pipe Type 2, Compression Fittings, and Compression Joints for Hot and Cold Drinking-Water Systems
  • ASTM F1987-01R11

    Specification for:Multilayer Pipe Type 2, Compression Fittings, and Compression Joints for Hydronic Heating Systems
  • ASTM F2018-00R10

    Test Method for:Time-to-Failure of Plastics Using Plane Strain Tensile Specimens
  • ASTM F2019-11

    Practice for:Rehabilitation of Existing Pipelines and Conduits by the Pulled in Place Installation of Glass Reinforced Plastic (GRP) Cured-in-Place Thermosetting Resin Pipe (CIPP)
  • ASTM F2021-11

    Guide for:Design and Installation of Plastic Siphonic Roof Drainage Systems
  • ASTM F2023-15

    Test Method for:Evaluating the Oxidative Resistance of Crosslinked Polyethylene (PEX) Pipe, Tubing and Systems to Hot Chlorinated Water
  • ASTM F2080-15A

    Specification for:Cold-Expansion Fittings with Metal Compression-Sleeves for Crosslinked Polyethylene (PEX) Pipe
  • ASTM F2098-08

    Specification for:Stainless Steel Clamps for Securing SDR9 Cross-linked Polyethylene (PEX) Tubing to Metal Insert and Plastic Insert Fittings
  • ASTM F2135-01R12

    Specification for:Molded Drain, Waste, and Vent (DWV) Short-Pattern Plastic Fittings
  • ASTM F2136-08R15

    Test Method for:Notched, Constant Ligament-Stress (NCLS) Test to Determine Slow-Crack-Growth Resistance of HDPE Resins or HDPE Corrugated Pipe
  • ASTM F2138-12

    Specification for:Excess Flow Valves for Natural Gas Service
  • ASTM F2145-13

    Specification for:Polyamide 11 (PA 11) and Polyamide 12 (PA12) Mechanical Fittings for Use on Outside Diameter Controlled Polyamide 11 and Polyamide 12 Pipe and Tubing
  • ASTM F2159-14

    Specification for:Plastic Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-linked Polyethylene (PEX) Tubing and SDR9 Polyethylene of Raised Temperature (PE-RT) Tubing
  • ASTM F2160-10

    Specification for:Solid Wall High Density Polyethylene (HDPE) Conduit Based on Controlled Outside Diameter (OD)
  • ASTM F2164-13

    Practice for:Field Leak Testing of Polyethylene (PE) and Crosslinked Polyethylene (PEX) Pressure Piping Systems Using Hydrostatic Pressure
  • ASTM F2165-13

    Specification for:Flexible Pre-Insulated Piping
  • ASTM F2176-02R09

    Specification for:Mechanical Couplings Used on Polyethylene Conduit, Duct and Innerduct
  • ASTM F2206-14

    Specification for:Fabricated Fittings of Butt-Fused Polyethylene (PE)
  • ASTM F2207-06R13

    Specification for:Cured-in-Place Pipe Lining System for Rehabilitation of Metallic Gas Pipe
  • ASTM F2231-02R13

    Test Method for:Charpy Impact Test on Thin Specimens of Polyethylene Used in Pressurized Pipes
  • ASTM F2261-06R11

    Test Method for:Pressure Rating Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 40 and 80 Socket-Type.
  • ASTM F2262-09

    Specification for:Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene Tubing OD Controlled SDR9
  • ASTM F2263-14

    Test Method for:Evaluating the Oxidative Resistance of Polyethylene (PE) Pipe to Chlorinated Water
  • ASTM F2306_F2306M-14E01

    Specification for:12 to 60 in. [300 to 1500 mm] Annular Corrugated Profile-Wall Polyethylene (PE) Pipe and Fittings for Gravity-Flow Storm Sewer and Subsurface Drainage Applications
  • ASTM F2331-11

    Test Method for:Determining Chemical Compatibility of Substances in Contact with Thermoplastic Pipe and Fittings Materials
  • ASTM F2389-15

    Specification for:Pressure-rated Polypropylene (PP) Piping Systems
  • ASTM F2390-12

    Specification for:Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent (DWV) Pipe and Fittings Having Post-Industrial Recycle Content
  • ASTM F2418-13

    Specification for:Polypropylene (PP) Corrugated Wall Stormwater Collection Chambers
  • ASTM F2433-05R13

    Test Method for:Determining Thermoplastic Pipe Wall Stiffness
  • ASTM F2434-14

    Specification for:Metal Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-linked Polyethylene (PEX) Tubing and SDR9 Cross-linked Polyethylene/Aluminum/Cross-linked Polyethylene (PEX-AL-PEX) Tubing
  • ASTM F2435-15

    Specification for:Steel Reinforced Polyethylene (PE) Corrugated Pipe
  • ASTM F2487-13

    Practice for:Infiltration and Exfiltration Acceptance Testing of Installed Corrugated High Density Polyethylene and Polypropylene Pipelines
  • ASTM F2509-15

    Specification for:Field-assembled Anodeless Riser Kits for Use on Outside Diameter Controlled Polyethylene and Polyamide-11 (PA11) Gas Distribution Pipe and Tubing
  • ASTM F2510_F2510M-07R13

    Specification for:Resilient Connectors Between Reinforced Concrete Manhole Structures and Corrugated High Density Polyethylene Drainage Pipes
  • ASTM F2536-06BR11

    Guide for:Installing Plastic DWV Piping Suspended from On-Grade Slabs
  • ASTM F2561-11

    Practice for:Rehabilitation of a Sewer Service Lateral and Its Connection to the Main Using a One Piece Main and Lateral Cured-in-Place Liner
  • ASTM F2562_F2562M-15

    Specification for:Steel Reinforced Thermoplastic Ribbed Pipe and Fittings for Non-Pressure Drainage and Sewerage
  • ASTM F2599-11

    Practice for:The Sectional Repair of Damaged Pipe By Means of An Inverted Cured-In-Place Liner
  • ASTM F2600-09R13

    Specification for:Electrofusion Type Polyamide-11 Fittings for Outside Diameter Controlled Polyamide-11 Pipe and Tubing
  • ASTM F2618-15

    Specification for:Chlorinated Poly (Vinyl Chloride) (CPVC) Pipe and Fittings for Chemical Waste Drainage Systems
  • ASTM F2619_F2619M-13

    Specification for:High-Density Polyethylene (PE) Line Pipe
  • ASTM F2620-13

    Practice for:Heat Fusion Joining of Polyethylene Pipe and Fittings
  • ASTM F2623-14

    Specification for:Polyethylene of Raised Temperature (PE-RT) SDR 9 Tubing
  • ASTM F2634-15

    Test Method for:Laboratory Testing of Polyethylene (PE) Butt Fusion Joints using Tensile-Impact Method
  • ASTM F2648_F2648M-13

    Specification for:2 to 60 inch [50 to 1500 mm] Annular Corrugated Profile Wall Polyethylene (PE) Pipe and Fittings for Land Drainage Applications
  • ASTM F2649-14

    Specification for:Corrugated High Density Polyethylene (HDPE) Grease Interceptor Tanks
  • ASTM F2657-07R12

    Test Method for:Outdoor Weathering Exposure of Crosslinked Polyethylene (PEX) Tubing
  • ASTM F2658-07R13

    Specification for:Type PSM Poly(Vinyl Chloride) (PVC) SDR 51 and SDR 64 Sewer Pipe and Fittings
  • ASTM F2686-14

    Specification for:Glass Fiber Reinforced Thermoplastic Pipe
  • ASTM F2718-09R15

    Specification for:Polyethylene (PE) and Cement Materials for an Encapsulated Cement Mortar Formed in Place Liner System (FIPLS) for the Rehabilitation of Water Pipelines
  • ASTM F2719-09R15

    Practice for:Installation of Polyethylene (PE) and Encapsulated Cement Mortar Formed in Place Lining System (FIPLS) for the Rehabilitation of Water Pipelines
  • ASTM F2720_F2720M-09

    Specification for:Glass Fiber Reinforced Polyethylene (PE-GF) Spiral Wound Large Diameter Pipe
  • ASTM F2735-09

    Specification for:Plastic Insert Fittings For SDR9 Cross-linked Polyethylene (PEX) and Polyethylene of Raised Temperature (PE-RT) Tubing
  • ASTM F2736-13E01

    Specification for:6 to 30 in. (152 To 762 mm) Polypropylene (PP) Corrugated Single Wall Pipe And Double Wall Pipe
  • ASTM F2737-11

    Specification for:Corrugated High Density Polyethylene (HDPE) Water Quality Units
  • ASTM F2762-11E01

    Specification for:12 to 30 in. (300 to 750 mm) Annular Corrugated Profile-Wall Polyethylene (PE) Pipe and Fittings for Sanitary Sewer Applications
  • ASTM F2763-11

    Specification for:30 to 60 in. [750 to 1500 mm] Triple Profile-Wall Polyethylene (PE) Pipe and Fittings for Sanitary Sewer Applications
  • ASTM F2764_F2764M-11AE02

    Specification for:30 to 60 in. [750 to 1500 mm] Polypropylene (PP) Triple Wall Pipe and Fittings for Non-Pressure Sanitary Sewer Applications
  • ASTM F2767-12

    Specification for:Electrofusion Type Polyamide-12 Fittings for Outside Diameter Controlled Polyamide-12 Pipe and Tubing for Gas Distribution
  • ASTM F2768-09

    Specification for:Modified Stub ACME Thread Joint with Elastomeric Seal in Plastic Piping Components
  • ASTM F2769-14

    Specification for:Polyethylene of Raised Temperature (PE-RT) Plastic Hot and Cold-Water Tubing and Distribution Systems
  • ASTM F2785-12

    Specification for:Polyamide 12 Gas Pressure Pipe, Tubing, and Fittings
  • ASTM F2786-10

    Practice for:Field Leak Testing of Polyethylene (PE) Pressure Piping Systems Using Gaseous Media Under Pressure (Pneumatic Leak Testing)
  • ASTM F2787-13

    Practice for:Structural Design of Thermoplastic Corrugated Wall Stormwater Collection Chambers
  • ASTM F2788_F2788M-15

    Specification for:Metric and Inch-sized Crosslinked Polyethylene (PEX) Pipe
  • ASTM F2805-11

    Specification for:Multilayer Thermoplastic And Flexible Steel Pipe And Connections
  • ASTM F2806-10R15

    Specification for:Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe (Metric SDR-PR)
  • ASTM F2807-13

    Specification for:Multilayer Polyethylene-Polyamide (PE-PA) Pipe for Pressure Piping Applications
  • ASTM F2817-13

    Specification for:Poly (Vinyl Chloride) (PVC) Gas Pressure Pipe and Fittings For Maintenance or Repair
  • ASTM F2818-10R14E01

    Specification for:Specification for Crosslinked Polyethylene (PEX) Material Gas Pressure Pipe and Tubing
  • ASTM F2829_F2829M-15

    Specification for:Metric- and Inch-Sized Crosslinked Polyethylene (PEX) Pipe Systems
  • ASTM F2830-11

    Specification for:Manufacture and Joining of Polyethylene (PE) Gas Pressure Pipe With a Peelable Polypropylene (PP) Outer Layer
  • ASTM F2831-12

    Practice for:Internal Non Structural Epoxy Barrier Coating Material Used In Rehabilitation of Metallic Pressurized Piping Systems
  • ASTM F2854-10

    Specification for:Push-Fit Crosslinked Polyethylene (PEX) Mechanical Fittings for Crosslinked Polyethylene (PEX) Tubing
  • ASTM F2855-12

    Specification for:Chlorinated Poly(Vinyl Chloride)/Aluminum/Chlorinated Poly(Vinyl Chloride) (CPVC-AL-CPVC) Composite Pressure Tubing
  • ASTM F2880-14

    Specification for:Lap-Joint Type Flange Adapters for Polyethylene Pressure Pipe in Nominal Pipe Sizes 34 in. to 65 in.
  • ASTM F2881-11R15

    Specification for:12 to 60 in. [300 to 1500 mm] Polypropylene (PP) Dual Wall Pipe and Fittings for Non-Pressure Storm Sewer Applications
  • ASTM F2896-11

    Specification for:Reinforced Polyethylene Composite Pipe For The Transport Of Oil And Gas And Hazardous Liquids
  • ASTM F2897-15A

    Specification for:Tracking and Traceability Encoding System of Natural Gas Distribution Components (Pipe, Tubing, Fittings, Valves, and Appurtenances)
  • ASTM F2905_F2905M-13

    Specification for:Black Crosslinked Polyethylene (PEX) Line Pipe, Fittings and Joints For Oil and Gas Producing Applications
  • ASTM F2922-13E01

    Specification for:Polyethylene (PE) Corrugated Wall Stormwater Collection Chambers
  • ASTM F2928-13

    Practice for:Specimens and Testing Conditions for Testing Polyethylene (PE) Pipe Butt Fusions Using Tensile and Hydrostatic Test Methods
  • ASTM F2929-13

    Specification for:Crosslinked Polyethylene (PEX) Tubing of 0.070 in. Wall and Fittings for Radiant Heating Systems up to 75 psig
  • ASTM F2945-15

    Specification for:Polyamide 11 Gas Pressure Pipe, Tubing, and Fittings
  • ASTM F2946-12

    Specification for:PVC Hub and Elastomeric Seal (Gasket) Tee Connection for Joining Plastic Pipe to Insitu Pipelines and Manholes
  • ASTM F2947_F2947M-14

    Specification for:150 to 1500 mm [6 to 60 in.] Annular Corrugated Profile-Wall Polyethylene (PE) Pipe and Fittings for Sanitary Sewer Applications
  • ASTM F2968_F2968M-14A

    Specification for:Black Crosslinked Polyethylene (PEX) Pipe, Fittings and Joints For Gas Distribution Applications
  • ASTM F2969-12

    Specification for:Acrylonitrile-Butadiene-Styrene (ABS) IPS Dimensioned Pressure Pipe
  • ASTM F2984-13

    Specification for:Segmental Panel System for the Grout-in-Place-Liner (GIPL) Rehabilitation Method of Existing Man-Entry Size Sewers, Culverts, and Conduits
  • ASTM F2985-14

    Practice for:Installation of a PVC Segmental Panel Liner System in Man-Entry Size Sewers and Conduits
  • ASTM F2986-12

    Specification for:Corrugated Polyethylene Pipe and Fittings for Mine Leachate Applications
  • ASTM F2987-12

    Specification for:Corrugated Polyethylene Pipe and Fittings for Mine Heap Leach Aeration Applications
  • ASTM F2994-13

    Practice for:Utilization of Mobile, Automated Cured-In-Place Pipe (CIPP) Impregnation Systems
  • ASTM F3034-15

    Specification for:Billets made by Winding Molten Extruded Stress-Rated High Density Polyethylene (HDPE)
  • ASTM F3097-15

    Practice for:Installation of an Outside Sewer Service Cleanout through a Minimally Invasive Small Bore Vacuum Excavation
  • ASTM F3123-15A

    Specification for:Metric Outside Diameter Polyethylene (PE) Plastic Pipe (DR-PN)
  • ASTM F3124-15E01

    Practice for:Data Recording the Procedure used to Produce Heat Butt Fusion Joints in Plastic Piping Systems or Fittings
  • ASTM F3128-15

    Specification for:Poly(Vinyl Chloride) (PVC) Schedule 40 Drain, Waste, and Vent Pipe with a Cellular Core