한국표준정보망(KSSN)

ASTM Annual Book 수록 리스트

핸드북  >  ASTM

    11.07 : 대기 분석

  • ASTM D1356-15B

    Terminology Relating to:Sampling and Analysis of Atmospheres
  • ASTM D1357-95R11

    Practice for:Planning the Sampling of the Ambient Atmosphere
  • ASTM D1607-91R11

    Test Method for:Nitrogen Dioxide Content of the Atmosphere (Griess-Saltzman Reaction)
  • ASTM D1608-98R09

    Test Method for:Oxides of Nitrogen in Gaseous Combustion Products (Phenol-Disulfonic Acid Procedures)
  • ASTM D1739-98R10

    Test Method for:Collection and Measurement of Dustfall (Settleable Particulate Matter)
  • ASTM D1914-95R14

    Practice for:Conversion Units and Factors Relating to Sampling and Analysis of Atmospheres
  • ASTM D2010_D2010M-98R10

    Test Methods for:Evaluation of Total Sulfation Activity in the Atmosphere by the Lead Dioxide Technique
  • ASTM D2913-14

    Test Method for:Mercaptan Content of the Atmosphere
  • ASTM D2914-15

    Test Methods for:Sulfur Dioxide Content of the Atmosphere (West-Gaeke Method)
  • ASTM D3154-14

    Test Method for:Average Velocity in a Duct (Pitot Tube Method)
  • ASTM D3162-12

    Test Method for:Carbon Monoxide in the Atmosphere (Continuous Measurement by Nondispersive Infrared Spectrometry)
  • ASTM D3195_D3195M-10R15

    Practice for:Rotameter Calibration
  • ASTM D3249-95R11

    Practice for:General Ambient Air Analyzer Procedures
  • ASTM D3266-91R11

    Test Method for:Automated Separation and Collection of Particulate and Acidic Gaseous Fluoride in the Atmosphere (Double Paper Tape Sampler Method)
  • ASTM D3267-12

    Test Method for:Separation and Collection of Particulate and Water-Soluble Gaseous Fluorides in the Atmosphere (Filter and Impinger Method)
  • ASTM D3268-91R11

    Test Method for:Separation and Collection of Particulate and Gaseous Fluorides in the Atmosphere (Sodium Bicarbonate-Coated Glass Tube and Particulate Filter Method)
  • ASTM D3270-13

    Test Methods for:Analysis for Fluoride Content of the Atmosphere and Plant Tissues (Semiautomated Method)
  • ASTM D3464-96R14

    Test Method for:Average Velocity in a Duct Using a Thermal Anemometer
  • ASTM D3608-95R11

    Test Method for:Nitrogen Oxides (Combined) Content in the Atmosphere by the Griess-Saltzman Reaction
  • ASTM D3609-00R14

    Practice for:Calibration Techniques Using Permeation Tubes
  • ASTM D3614-07R13

    Guide for:Laboratories Engaged in Sampling and Analysis of Atmospheres and Emissions
  • ASTM D3631-99R11

    Test Methods for:Measuring Surface Atmospheric Pressure
  • ASTM D3670-91R14

    Guide for:Determination of Precision and Bias of Methods of Committee D22
  • ASTM D3685_D3685M-13

    Test Methods for:Sampling and Determination of Particulate Matter in Stack Gases
  • ASTM D3686-13

    Practice for:Sampling Atmospheres to Collect Organic Compound Vapors (Activated Charcoal Tube Adsorption Method)
  • ASTM D3687-07R12

    Practice for:Analysis of Organic Compound Vapors Collected by the Activated Charcoal Tube Adsorption Method
  • ASTM D3796-09

    Practice for:Calibration of Type S Pitot Tubes
  • ASTM D3824-12

    Test Methods for:Continuous Measurement of Oxides of Nitrogen in the Ambient or Workplace Atmosphere by the Chemiluminescent Method
  • ASTM D4096-91R09

    Test Method for:Determination of Total Suspended Particulate Matter in the Atmosphere (High–Volume Sampler Method)
  • ASTM D4185-06R11

    Practice for:Measurement of Metals in Workplace Atmospheres by Flame Atomic Absorption Spectrophotometry
  • ASTM D4230-02R12

    Test Method of:Measuring Humidity with Cooled-Surface Condensation (Dew-Point) Hygrometer
  • ASTM D4298-04R14E01

    Guide for:Intercomparing Permeation Tubes to Establish Traceability
  • ASTM D4323-15

    Test Method for:Hydrogen Sulfide in the Atmosphere by Rate of Change of Reflectance
  • ASTM D4413

    Test Method for:Determination of Ethylene Oxide in Workplace Atmospheres (Charcoal Tube Methodology)
  • ASTM D4430-00R15

    Practice for:Determining the Operational Comparability of Meteorological Measurements
  • ASTM D4490-96R11

    Practice for:Measuring the Concentration of Toxic Gases or Vapors Using Detector Tubes
  • ASTM D4532-15

    Test Method for:Respirable Dust in Workplace Atmospheres Using Cyclone Samplers
  • ASTM D4597-10R15

    Practice for:Sampling Workplace Atmospheres to Collect Gases or Vapors with Solid Sorbent Diffusive Samplers
  • ASTM D4599-14

    Practice for:Measuring the Concentration of Toxic Gases or Vapors Using Length-of-Stain Dosimeters
  • ASTM D4600-95R10

    Test Method for:Determination of Benzene-Soluble Particulate Matter in Workplace Atmospheres
  • ASTM D4765-13

    Test Method for:Measurement of Fluorides in Workplace Atmospheres by Ion-Selective Electrodes
  • ASTM D4766-98R14

    Test Method for:Vinyl Chloride in Workplace Atmospheres (Charcoal Tube Method)
  • ASTM D4856-11

    Test Method for:Determination of Sulfuric Acid Mist in Workplace Atmospheres Collected on Mixed Cellulose Ester Filters (Ion Chromatographic Analysis)
  • ASTM D4861-11

    Practice for:Sampling and Selection of Analytical Techniques for Pesticides and Polychlorinated Biphenyls in Air
  • ASTM D4913-00R11

    Practice for:Determining Concentration of Hydrogen Sulfide by Direct Reading, Length of Stain, Visual Chemical Detectors
  • ASTM D5011-92R09

    Practices for:Calibration of Ozone Monitors Using Transfer Standards
  • ASTM D5012-01R13

    Guide for:Preparation of Materials Used for the Collection and Preservation of Atmospheric Wet Deposition
  • ASTM D5015-15

    Test Method for:pH of Atmospheric Wet Deposition Samples by Electrometric Determination
  • ASTM D5075-01R12E01

    Test Method for:Nicotine and 3-Ethenylpyridine in Indoor Air
  • ASTM D5085-02R13

    Test Method for:Determination of Chloride, Nitrate, and Sulfate in Atmospheric Wet Deposition by Chemically Suppressed Ion Chromatography
  • ASTM D5086-01R13

    Test Method for:Determination of Calcium, Magnesium, Potassium, and Sodium in Atmospheric Wet Deposition by Flame Atomic Absorption Spectrophotometry
  • ASTM D5096-02R11

    Test Method for:Determining the Performance of a Cup Anemometer or Propeller Anemometer
  • ASTM D5110-98R10

    Practice for:Calibration of Ozone Monitors and Certification of Ozone Transfer Standards Using Ultraviolet Photometry
  • ASTM D5111-12

    Guide for:Choosing Locations and Sampling Methods to Monitor Atmospheric Deposition at Non-Urban Locations
  • ASTM D5116-10

    Guide for:Small-Scale Environmental Chamber Determinations of Organic Emissions from Indoor Materials/Products
  • ASTM D5149-02R08

    Test Method for:Ozone in the Atmosphere: Continuous Measurement by Ethylene Chemiluminescence
  • ASTM D5156-02R08

    Test Methods for:Continuous Measurement of Ozone in Ambient, Workplace, and Indoor Atmospheres (Ultraviolet Absorption)
  • ASTM D5157-97R14

    Guide for:Statistical Evaluation of Indoor Air Quality Models
  • ASTM D5197-09E01

    Test Method for:Determination of Formaldehyde and Other Carbonyl Compounds in Air (Active Sampler Methodology)
  • ASTM D5280-96R13

    Practice for:Evaluation of Performance Characteristics of Air Quality Measurement Methods with Linear Calibration Functions
  • ASTM D5281

    Test Method for:Collection and Analysis of Hexavalent Chromium in Ambient Atmospheres
  • ASTM D5337-11

    Practice for:Flow Rate Adjustment of Personal Sampling Pumps
  • ASTM D5366-96R11

    Test Method for:Determining the Dynamic Performance of a Wind Vane
  • ASTM D5438-11

    Practice for:Collection of Floor Dust for Chemical Analysis
  • ASTM D5466-01R07

    Test Method for:Determination of Volatile Organic Chemicals in Atmospheres (Canister Sampling Methodology)
  • ASTM D5527-00R11

    Practices for:Measuring Surface Wind and Temperature by Acoustic Means
  • ASTM D5578-04R15

    Test Method for:Determination of Ethylene Oxide in Workplace Atmospheres (HBr Derivatization Method)
  • ASTM D5741-96R11

    Practice for:Characterizing Surface Wind Using a Wind Vane and Rotating Anemometer
  • ASTM D5755-09R14E01

    Test Method for:Microvacuum Sampling and Indirect Analysis of Dust by Transmission Electron Microscopy for Asbestos Structure Number Surface Loading
  • ASTM D5756-02R08

    Test Method for:Microvacuum Sampling and Indirect Analysis of Dust by Transmission Electron Microscopy for Asbestos Mass Surface Loading
  • ASTM D5791-95R12E01

    Guide for:Using Probability Sampling Methods in Studies of Indoor Air Quality in Buildings
  • ASTM D5835-95R13

    Practice for:Sampling Stationary Source Emissions for the Automated Determination of Gas Concentrations
  • ASTM D5836-08R13

    Test Method for:Determination of 2,4-Toluene Diisocyanate (2,4-TDI) and 2,6-Toluene Diisocyanate (2,6-TDI) in Workplace Atmospheres (1-2 PP Method)
  • ASTM D5932-08R13E01

    Test Method for:Determination of 2,4-Toluene Diisocyanate (2,4-TDI) and 2,6-Toluene Diisocyanate (2,6-TDI) in Air (with 9-(N-Methylaminomethyl) Anthracene Method) (MAMA) in the Workplace
  • ASTM D5952-08R15

    Guide for the:Inspection of Water Systems for Legionella and the Investigation of Possible Outbreaks of Legionellosis (Legionnaires' Disease or Pontiac Fever)
  • ASTM D5953M-96R09

    Test Method for:Determination of Non-Methane Organic Compounds (NMOC) in Ambient Air Using Cryogenic Preconcentration and Direct Flame Ionization Detection Method
  • ASTM D5955-02R12E01

    Test Methods for:Estimating Contribution of Environmental Tobacco Smoke to Respirable Suspended Particles Based on UVPM and FPM
  • ASTM D6011-96R15

    Test Method for:Determining the Performance of a Sonic Anemometer/Thermometer
  • ASTM D6056-96R11

    Test Method for:Determining Concentration of Airborne Single-Crystal Ceramic Whiskers in the Workplace Environment by Transmission Electron Microscopy
  • ASTM D6057-96R11

    Test Method for:Determining Concentration of Airborne Single-Crystal Ceramic Whiskers in the Workplace Environment by Phase Contrast Microscopy
  • ASTM D6058-96R11

    Practice for:Determining Concentration of Airborne Single-Crystal Ceramic Whiskers in the Workplace Environment
  • ASTM D6059-96R11

    Test Method for:Determining Concentration of Airborne Single-Crystal Ceramic Whiskers in the Workplace Environment by Scanning Electron Microscopy
  • ASTM D6060-96R09

    Practice for:Sampling of Process Vents with a Portable Gas Chromatograph
  • ASTM D6061-01R12E01

    Practice for:Evaluating the Performance of Respirable Aerosol Samplers
  • ASTM D6062-07R12

    Guide for:Personal Samplers of Health-Related Aerosol Fractions
  • ASTM D6176-97R15

    Practice for:Measuring Surface Atmospheric Temperature with Electrical Resistance Temperature Sensors
  • ASTM D6177-14

    Practice for:Determining Emission Profiles of Volatile Organic Chemicals Emitted from Bedding Sets
  • ASTM D6178-14

    Practice for:Estimation of Short-term Inhalation Exposure to Volatile Organic Chemicals Emitted from Bedding Sets
  • ASTM D6196-03R09

    Practice for:Selection of Sorbents, Sampling, and Thermal Desorption Analysis Procedures for Volatile Organic Compounds in Air
  • ASTM D6209-13

    Test Method for:Determination of Gaseous and Particulate Polycyclic Aromatic Hydrocarbons in Ambient Air (Collection on Sorbent-Backed Filters with Gas Chromatographic/Mass Spectrometric Analysis)
  • ASTM D6216-12

    Practice for:Opacity Monitor Manufacturers to Certify Conformance with Design and Performance Specifications
  • ASTM D6245-12

    Guide for:Using Indoor Carbon Dioxide Concentrations to Evaluate Indoor Air Quality and Ventilation
  • ASTM D6246-08R13E01

    Practice for:Evaluating the Performance of Diffusive Samplers
  • ASTM D6271-10

    Test Method for:Estimating Contribution of Environmental Tobacco Smoke to Respirable Suspended Particles Based on Solanesol
  • ASTM D6281-09

    Test Method for:Airborne Asbestos Concentration in Ambient and Indoor Atmospheres as Determined by Transmission Electron Microscopy Direct Transfer (TEM)
  • ASTM D6306-10

    Guide for:Placement and Use of Diffusion Controlled Passive Monitors for Gaseous Pollutants in Indoor Air
  • ASTM D6327-10

    Test Method for:Determination of Radon Decay Product Concentration and Working Level in Indoor Atmospheres by Active Sampling on a Filter
  • ASTM D6328-12

    Guide for:Quality Assurance Protocols for Chemical Analysis of Atmospheric Wet Deposition
  • ASTM D6329-98R15

    Guide for:Developing Methodology for Evaluating the Ability of Indoor Materials to Support Microbial Growth Using Static Environmental Chambers
  • ASTM D6330-98R14

    Practice for:Determination of Volatile Organic Compounds (Excluding Formaldehyde) Emissions from Wood-Based Panels Using Small Environmental Chambers Under Defined Test Conditions
  • ASTM D6331-14

    Test Method for:Determination of Mass Concentration of Particulate Matter from Stationary Sources at Low Concentrations (Manual Gravimetric Method)
  • ASTM D6332-12

    Guide for:Testing Systems for Measuring Dynamic Responses of Carbon Monoxide Detectors to Gases and Vapors
  • ASTM D6333-10

    Practice for:Collection of Dislodgeable Pesticide Residues from Floors
  • ASTM D6345-10

    Guide for:Selection of Methods for Active, Integrative Sampling of Volatile Organic Compounds in Air
  • ASTM D6348-12E01

    Test Method for:Determination of Gaseous Compounds by Extractive Direct Interface Fourier Transform Infrared (FTIR) Spectroscopy
  • ASTM D6363-98R13

    Test Method for:Determination of Hydrogen Peroxide and Combined Organic Peroxides in Atmospheric Water Samples by Peroxidase Enzyme Fluorescence Method
  • ASTM D6399-10

    Guide for:Selecting Instruments and Methods for Measuring Air Quality in Aircraft Cabins
  • ASTM D6420-99R10

    Test Method for:Determination of Gaseous Organic Compounds by Direct Interface Gas Chromatography-Mass Spectrometry
  • ASTM D6480-05R10

    Test Method for:Wipe Sampling of Surfaces, Indirect Preparation, and Analysis for Asbestos Structure Number Surface Loading by Transmission Electron Microscopy
  • ASTM D6485-11

    Guide for:Risk Characterization of Acute and Irritant Effects of Short-Term Exposure to Volatile Organic Chemicals Emitted from Bedding Sets
  • ASTM D6494-99R15

    Test Method for:Determination of Asphalt Fume Particulate Matter in Workplace Atmospheres as Benzene Soluble Fraction
  • ASTM D6522-11

    Test Method for:Determination of Nitrogen Oxides, Carbon Monoxide, and Oxygen Concentrations in Emissions from Natural Gas-Fired Reciprocating Engines, Combustion Turbines, Boilers, and Process Heaters Using Portable Analyzers
  • ASTM D6552-06R11

    Practice for:Controlling and Characterizing Errors in Weighing Collected Aerosols
  • ASTM D6561-06R11

    Test Method for:Determination of Aerosol Monomeric and Oligomeric Hexamethylene Diisocyanate (HDl) in Air with (Methoxy-2–phenyl-1) Piperazine (MOPIP) in the Workplace
  • ASTM D6562-12

    Test Method for:Determination of Gaseous Hexamethylene Diisocyanate (HDI) in Air with 9-(N-methylaminomethyl) Anthracene Method (MAMA) in the Workplace
  • ASTM D6589-05R15

    Guide for:Statistical Evaluation of Atmospheric Dispersion Model Performance
  • ASTM D6620-06R10

    Practice for:Asbestos Detection Limit Based on Counts
  • ASTM D6669-12

    Practice for:Selecting and Constructing Exposure Scenarios for Assessment of Exposures to Alkyd and Latex Interior Paints
  • ASTM D6670-13

    Practice for:Full-Scale Chamber Determination of Volatile Organic Emissions from Indoor Materials/Products
  • ASTM D6735-01R09

    Test Method for:Measurement of Gaseous Chlorides and Fluorides from Mineral Calcining Exhaust Sources—Impinger Method
  • ASTM D6784-02R08

    Test Method for:Elemental, Oxidized, Particle-Bound and Total Mercury in Flue Gas Generated from Coal-Fired Stationary Sources (Ontario Hydro Method)
  • ASTM D6785-13

    Test Method for:Determination of Lead in Workplace Air Using Flame or Graphite Furnace Atomic Absorption Spectrometry
  • ASTM D6803-13

    Practice for:Testing and Sampling of Volatile Organic Compounds (Including Carbonyl Compounds) Emitted from Paint Using Small Environmental Chambers
  • ASTM D6830-02R08

    Test Method for:Characterizing the Pressure Drop and Filtration Performance of Cleanable Filter Media
  • ASTM D6831-11

    Test Method for:Sampling and Determining Particulate Matter in Stack Gases Using an In-Stack, Inertial Microbalance
  • ASTM D6832-13E01

    Test Method for:the Determination of Hexavalent Chromium in Workplace Air by Ion Chromatography and Spectrophotometric Measurement Using 1,5-diphenylcarbazide
  • ASTM D6877-13E01

    Test Method for:Monitoring Diesel Particulate Exhaust in the Workplace
  • ASTM D6966-13

    Practice for:Collection of Settled Dust Samples Using Wipe Sampling Methods for Subsequent Determination of Metals
  • ASTM D7034-11

    Guide for:Deriving Acceptable Levels of Airborne Chemical Contaminants in Aircraft Cabins Based on Health and Comfort Considerations
  • ASTM D7035-10

    Test Method for:Determination of Metals and Metalloids in Airborne Particulate Matter by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)
  • ASTM D7036-12

    Practice for:Competence of Air Emission Testing Bodies
  • ASTM D7049-04R10

    Test Method for:Metal Removal Fluid Aerosol in Workplace Atmospheres
  • ASTM D7143-11

    Practice for:Emission Cells for the Determination of Volatile Organic Emissions from Indoor Materials/Products
  • ASTM D7144-05AR11

    Practice for:Collection of Surface Dust by Micro-vacuum Sampling for Subsequent Metals Determination
  • ASTM D7145-05R15

    Guide for:Measurement of Atmospheric Wind and Turbulence Profiles by Acoustic Means
  • ASTM D7200-12

    Practice for:Sampling and Counting Airborne Fibers, Including Asbestos Fibers, in Mines and Quarries, by Phase Contrast Microscopy and Transmission Electron Microscopy
  • ASTM D7201-06R11

    Practice for:Sampling and Counting Airborne Fibers, Including Asbestos Fibers, in the Workplace, by Phase Contrast Microscopy (with an Option of Transmission Electron Microscopy)
  • ASTM D7202-15

    Test Method for:Determination of Beryllium in the Workplace by Extraction and Optical Fluorescence Detection
  • ASTM D7295-11

    Practice for:Sampling and Determination of Hydrogen Cyanide (HCN) in Combustion Effluents and Other Stationary Sources
  • ASTM D7296-12

    Practice for:Collection of Settled Dust Samples Using Dry Wipe Sampling Methods for Subsequent Determination of Beryllium and Compounds
  • ASTM D7297-14

    Practice for:Evaluating Residential Indoor Air Quality Concerns
  • ASTM D7338-14

    Guide for:Assessment Of Fungal Growth in Buildings
  • ASTM D7339-12

    Test Method for:Determination of Volatile Organic Compounds Emitted from Carpet using a Specific Sorbent Tube and Thermal Desorption / Gas Chromatography
  • ASTM D7390-07R12

    Guide for:Evaluating Asbestos in Dust on Surfaces by Comparison Between Two Environments
  • ASTM D7391-09

    Test Method for:Categorization and Quantification of Airborne Fungal Structures in an Inertial Impaction Sample by Optical Microscopy
  • ASTM D7392-07R13

    Practice for:PM Detector and Bag Leak Detector Manufacturers to Certify Conformance with Design and Performance Specifications for Cement Plants
  • ASTM D7439-14

    Test Method for:Determination of Elements in Airborne Particulate Matter by Inductively Coupled Plasma–Mass Spectrometry
  • ASTM D7440-08R15E01

    Practice for:Characterizing Uncertainty in Air Quality Measurements
  • ASTM D7441-08R13

    Practice for:Separation of Beryllium from Other Metals in Digestion and Extraction Solutions from Workplace Dust Samples
  • ASTM D7459-08

    Practice for:Collection of Integrated Samples for the Speciation of Biomass (Biogenic) and Fossil-Derived Carbon Dioxide Emitted from Stationary Emissions Sources
  • ASTM D7520-13

    Test Method for:Determining the Opacity of a Plume in the Outdoor Ambient Atmosphere
  • ASTM D7521-13

    Test Method for:Determination of Asbestos in Soil
  • ASTM D7614-12

    Test Method for:Determination of Total Suspended Particulate (TSP) Hexavalent Chromium in Ambient Air Analyzed by Ion Chromatography (IC) and Spectrophotometric Measurements
  • ASTM D7659-10R15

    Guide for:Strategies for Surface Sampling of Metals and Metalloids for Worker Protection
  • ASTM D7706-11

    Practice for:Rapid Screening of VOC Emissions from Products Using Micro-Scale Chambers
  • ASTM D7707-11

    Specification for:Wipe Sampling Materials for Beryllium in Surface Dust
  • ASTM D7712-11

    Terminology for:Sampling and Analysis of Asbestos
  • ASTM D7773-12

    Test Method for:Determination of Volatile Inorganic Acids (HCl, HBr, and HNO3 ) Using Filter Sampling and Suppressed Ion Chromatography
  • ASTM D7788-14

    Practice for:Collection of Total Airborne Fungal Structures via Inertial Impaction Methodology
  • ASTM D7789-12

    Practice for:Collection of Fungal Material from Surfaces by Swab
  • ASTM D7822-13

    Practice for:Dermal Wipe Sampling for the Subsequent Determination of Metals and Metalloids
  • ASTM D7859-13E01

    Practice for:Spraying, Sampling, Packaging, and Test Specimen Preparation of Spray Polyurethane Foam (SPF) Insulation for Testing of Emissions Using Environmental Chambers
  • ASTM D7886-14

    Practice for:Asbestos Exposure Assessments for Repetitive Maintenance and Installation Tasks
  • ASTM D7910-14

    Practice for:Collection of Fungal Material From Surfaces by Tape Lift
  • ASTM D7911-14

    Guide for:Using Reference Material to Characterize Measurement Bias Associated with Volatile Organic Compound Emission Chamber Test
  • ASTM D7948-14

    Test Method for:Measurement of Respirable Crystalline Silica in Workplace Air by Infrared Spectrometry
  • ASTM E0104-02R12

    Practice for:Maintaining Constant Relative Humidity by Means of Aqueous Solutions
  • ASTM E0337-15

    Test Method for:Measuring Humidity with a Psychrometer (the Measurement of Wet- and Dry-Bulb Temperatures)
  • ASTM E1368-14

    Practice for:Visual Inspection of Asbestos Abatement Projects
  • ASTM E1370-14

    Guide for:Air Sampling Strategies for Worker and Workplace Protection
  • ASTM E1494-12

    Practice for:Encapsulation Testing of Friable Asbestos-Containing Surfacing Materials
  • ASTM E2356-14

    Practice for:Comprehensive Building Asbestos Surveys
  • ASTM E2394-11

    Practice for:Maintenance, Renovation, and Repair of Installed Asbestos Cement Products
  • ASTM F0778-88R14

    Methods for:Gas Flow Resistance Testing of Filtration Media
  • ASTM F1471-09

    Test Method for:Air Cleaning Performance of a High-Efficiency Particulate Air Filter System