한국표준정보망(KSSN)

ASTM Annual Book 수록 리스트

핸드북  >  ASTM

    12.02 : 원자력 (Ⅱ), 태양 및 지열에너지

  • ASTM 52628-13

    Practice for:Dosimetry in Radiation Processing
  • ASTM 52701-13

    Guide for:Performance Characterization of Dosimeters and Dosimetry Systems for Use in Radiation Processing
  • ASTM E0170-15A

    Terminology Relating to:Radiation Measurements and Dosimetry
  • ASTM E0181-10

    Test Methods for:Detector Calibration and Analysis of Radionuclides
  • ASTM E0185-15E01

    Practice for:Design of Surveillance Programs for Light-Water Moderated Nuclear Power Reactor Vessels
  • ASTM E0261-15

    Practice for:Determining Neutron Fluence, Fluence Rate, and Spectra by Radioactivation Techniques
  • ASTM E0262-13

    Test Method for:Determining Thermal Neutron Reaction Rates and Thermal Neutron Fluence Rates by Radioactivation Techniques
  • ASTM E0263-13

    Test Method for:Measuring Fast-Neutron Reaction Rates by Radioactivation of Iron
  • ASTM E0264-08R13

    Test Method for:Measuring Fast-Neutron Reaction Rates by Radioactivation of Nickel
  • ASTM E0265-15

    Test Method for:Measuring Reaction Rates and Fast-Neutron Fluences by Radioactivation of Sulfur-32
  • ASTM E0266-11

    Test Method for:Measuring Fast-Neutron Reaction Rates by Radioactivation of Aluminum
  • ASTM E0385-11

    Test Method for:Oxygen Content Using a 14-MeV Neutron Activation and Direct-Counting Technique
  • ASTM E0393-13

    Test Method for:Measuring Reaction Rates by Analysis of Barium-140 From Fission Dosimeters
  • ASTM E0424-71R15

    Test Methods for:Solar Energy Transmittance and Reflectance (Terrestrial) of Sheet Materials
  • ASTM E0481-15

    Test Method for:Measuring Neutron Fluence Rates by Radioactivation of Cobalt and Silver
  • ASTM E0482-11E01

    Guide for:Application of Neutron Transport Methods for Reactor Vessel Surveillance, E706 (IID)
  • ASTM E0496-14E01

    Test Method for:Measuring Neutron Fluence and Average Energy from 3H(d,n) 4He Neutron Generators by Radioactivation Techniques
  • ASTM E0509_E0509M-14

    Guide for:In-Service Annealing of Light-Water Moderated Nuclear Reactor Vessels
  • ASTM E0521-96R09E02

    Practice for:Neutron Radiation Damage Simulation by Charged-Particle Irradiation
  • ASTM E0523-11

    Test Method for:Measuring Fast-Neutron Reaction Rates by Radioactivation of Copper
  • ASTM E0526-08R13

    Test Method for:Measuring Fast-Neutron Reaction Rates by Radioactivation of Titanium
  • ASTM E0531-13

    Practice for:Surveillance Testing of High-Temperature Nuclear Component Materials
  • ASTM E0636-14

    Guide for:Conducting Supplemental Surveillance Tests for Nuclear Power Reactor Vessels, E 706 (IH)
  • ASTM E0666-14

    Practice for:Calculating Absorbed Dose From Gamma or X Radiation
  • ASTM E0668-13

    Practice for:Application of Thermoluminescence-Dosimetry (TLD) Systems for Determining Absorbed Dose in Radiation-Hardness Testing of Electronic Devices
  • ASTM E0683-91R13

    Practice for:Installation and Service of Solar Space Heating Systems for One- and Two-Family Dwellings
  • ASTM E0693-12

    Practice for:Characterizing Neutron Exposures in Iron and Low Alloy Steels in Terms of Displacements Per Atom (DPA), E 706(ID)
  • ASTM E0704-13

    Test Method for:Measuring Reaction Rates by Radioactivation of Uranium-238
  • ASTM E0705-13A

    Test Method for:Measuring Reaction Rates by Radioactivation of Neptunium-237
  • ASTM E0712-80R09

    Practice for:Laboratory Screening of Metallic Containment Materials for Use With Liquids in Solar Heating and Cooling Systems
  • ASTM E0720-11

    Guide for:Selection and Use of Neutron Sensors for Determining Neutron Spectra Employed in Radiation-Hardness Testing of Electronics
  • ASTM E0721-11

    Guide for:Determining Neutron Energy Spectra from Neutron Sensors for Radiation-Hardness Testing of Electronics
  • ASTM E0722-14

    Practice for:Characterizing Neutron Fluence Spectra in Terms of an Equivalent Monoenergetic Neutron Fluence for Radiation-Hardness Testing of Electronics
  • ASTM E0744-07R15

    Practice for:Evaluating Solar Absorptive Materials for Thermal Applications
  • ASTM E0745-80R09

    Practices for:Simulated Service Testing for Corrosion of Metallic Containment Materials for Use With Heat-Transfer Fluids in Solar Heating and Cooling Systems
  • ASTM E0772-15

    Terminology of:Solar Energy Conversion
  • ASTM E0781-86R15

    Practice for:Evaluating Absorptive Solar Receiver Materials When Exposed to Conditions Simulating Stagnation in Solar Collectors With Cover Plates
  • ASTM E0782-95R15

    Practice for:Exposure of Cover Materials for Solar Collectors to Natural Weathering Under Conditions Simulating Operational Mode
  • ASTM E0798-96R09

    Practice for:Conducting Irradiations at Accelerator-Based Neutron Sources
  • ASTM E0821-96R09

    Practice for:Measurement of Mechanical Properties During Charged-Particle Irradiation
  • ASTM E0822-92R15

    Practice for:Determining Resistance of Solar Collector Covers to Hail by Impact With Propelled Ice Balls
  • ASTM E0844-09R14E01

    Guide for:Sensor Set Design and Irradiation for Reactor Surveillance, E 706 (IIC)
  • ASTM E0853-13

    Practice for:Analysis and Interpretation of Light-Water Reactor Surveillance Results
  • ASTM E0854-14

    Test Method for:Application and Analysis of Solid State Track Recorder (SSTR) Monitors for Reactor Surveillance, E706(IIIB)
  • ASTM E0861-13

    Practice for:Evaluating Thermal Insulation Materials for Use in Solar Collectors
  • ASTM E0881-92R15

    Practice for:Exposure of Solar Collector Cover Materials to Natural Weathering Under Conditions Simulating Stagnation Mode
  • ASTM E0900-15

    Guide for:Predicting Radiation-Induced Transition Temperature Shift in Reactor Vessel Materials
  • ASTM E0903-12

    Test Method for:Solar Absorptance, Reflectance, and Transmittance of Materials Using Integrating Spheres
  • ASTM E0904

    Practice for:Generating All-Day Thermal Performance Data for Solar Collectors
  • ASTM E0905-87R13

    Test Method for:Determining Thermal Performance of Tracking Concentrating Solar Collectors
  • ASTM E0910-07R13

    Test Method for:Application and Analysis of Helium Accumulation Fluence Monitors for Reactor Vessel Surveillance, E706 (IIIC)
  • ASTM E0927-10R15

    Specification for:Solar Simulation for Photovoltaic Testing
  • ASTM E0942-96R11

    Guide for:Simulation of Helium Effects in Irradiated Metals
  • ASTM E0944-13

    Guide for:Application of Neutron Spectrum Adjustment Methods in Reactor Surveillance, E 706 (IIA)
  • ASTM E0947-83R15

    Specification for:Sampling Single-Phase Geothermal Liquid or Steam for Purposes of Chemical Analysis
  • ASTM E0948-15

    Test Method for:Electrical Performance of Photovoltaic Cells Using Reference Cells Under Simulated Sunlight
  • ASTM E0957-03R11E01

    Terminology Relating to:Geothermal Energy
  • ASTM E0971-11

    Practice for:Calculation of Photometric Transmittance and Reflectance of Materials to Solar Radiation
  • ASTM E0972-96R13

    Test Method for:Solar Photometric Transmittance of Sheet Materials Using Sunlight
  • ASTM E0973-15

    Test Method for:Determination of the Spectral Mismatch Parameter Between a Photovoltaic Device and a Photovoltaic Reference Cell
  • ASTM E0974

    Guide for: Specifying Thermal Performance of Geothermal Power Systems
  • ASTM E1005-15

    Test Method for:Application and Analysis of Radiometric Monitors for Reactor Vessel Surveillance
  • ASTM E1006-13

    Practice for:Analysis and Interpretation of Physics Dosimetry Results from Test Reactor Experiments
  • ASTM E1008-03R09

    Practice for:Installation, Inspection, and Maintenance of Valve-body Pressure-relief Methods for Geothermal and Other High-Temperature Liquid Applications
  • ASTM E1018-09R13

    Guide for:Application of ASTM Evaluated Cross Section Data File, Matrix E706 (IIB)
  • ASTM E1021-15

    Test Method for:Spectral Responsivity Measurements of Photovoltaic Devices
  • ASTM E1026-15

    Practice for:Using the Fricke Dosimetry System
  • ASTM E1034-95R13

    Specification for:Nuclear Facility Transient Worker Records
  • ASTM E1035-13

    Practice for:Determining Neutron Exposures for Nuclear Reactor Vessel Support Structures
  • ASTM E1036-15

    Test Methods for:Electrical Performance of Nonconcentrator Terrestrial Photovoltaic Modules and Arrays Using Reference Cells
  • ASTM E1038-10R15

    Test Method for:Determining Resistance of Photovoltaic Modules to Hail by Impact with Propelled Ice Balls
  • ASTM E1040-10

    Specification for:Physical Characteristics of Nonconcentrator Terrestrial Photovoltaic Reference Cells
  • ASTM E1056-13

    Practice for:Installation and Service of Solar Domestic Water Heating Systems for One- and Two-Family Dwellings
  • ASTM E1068-85R09

    Test Method for:Testing Nonmetallic Seal Materials by Immersion in a Simulated Geothermal Test Fluid
  • ASTM E1069-85R09

    Test Method for:Testing Polymeric Seal Materials for Geothermal or High Temperature Service, or both, Under Sealing Stress
  • ASTM E1084-86R15

    Test Method for:Solar Transmittance (Terrestrial) of Sheet Materials Using Sunlight
  • ASTM E1089

    Test Method for:Water Penetration of Flat Plate Solar Collectors by Uniform Static Air Pressure Difference
  • ASTM E1125-10R15

    Test Method for:Calibration of Primary Non-Concentrator Terrestrial Photovoltaic Reference Cells Using a Tabular Spectrum
  • ASTM E1143-05R15

    Test Method for:Determining the Linearity of a Photovoltaic Device Parameter with Respect To a Test Parameter
  • ASTM E1160-13

    Guide for:On-Site Inspection and Verification of Operation of Solar Domestic Hot Water Systems
  • ASTM E1167-15

    Guide for:Radiation Protection Program for Decommissioning Operations
  • ASTM E1168-95R13

    Guide for:Radiological Protection Training for Nuclear Facility Workers
  • ASTM E1171-15

    Test Methods for:Photovoltaic Modules in Cyclic Temperature and Humidity Environments
  • ASTM E1175-87R15

    Test Method for:Determining Solar or Photopic Reflectance, Transmittance, and Absorptance of Materials Using a Large Diameter Integrating Sphere
  • ASTM E1204

    Practice for:Dosimetry in Gamma Irradiation Facilities for Food Processing
  • ASTM E1205-09

    Practice for:Use of a Ceric-Cerous Sulfate Dosimetry System
  • ASTM E1214-11

    Guide for:Use of Melt Wire Temperature Monitors for Reactor Vessel Surveillance, E 706 (IIIE)
  • ASTM E1249-15

    Practice for:Minimizing Dosimetry Errors in Radiation Hardness Testing of Silicon Electronic Devices Using Co-60 Sources
  • ASTM E1250-15

    Test Method for:Application of Ionization Chambers to Assess the Low Energy Gamma Component of Cobalt-60 Irradiators Used in Radiation-Hardness Testing of Silicon Electronic Devices
  • ASTM E1253-13

    Guide for:Reconstitution of Irradiated Charpy-Sized Specimens
  • ASTM E1261-13

    Practice for:Calibration of Routine Dosimetry Systems for Radiation Processing
  • ASTM E1275-13

    Practice for:Use of a Radiochromic Film Dosimetry System
  • ASTM E1276-12

    Practice for:Use of a Polymethylmethacrylate Dosimetry System
  • ASTM E1281-15

    Guide for:Nuclear Facility Decommissioning Plans
  • ASTM E1297-08R13

    Test Method for:Measuring Fast-Neutron Reaction Rates by Radioactivation of Niobium
  • ASTM E1310-04R12

    Practice for:Use of a Radiochromic Optical Waveguide Dosimetry System
  • ASTM E1362-15

    Test Methods for:Calibration of Non-Concentrator Photovoltaic Non-Primary Reference Cells
  • ASTM E1400

  • ASTM E1401-13

    Practice for:Use of a Dichromate Dosimetry System
  • ASTM E1431-05

    Practice for:Dosimetry in Electron Beam and X-Ray (Bremsstrahlung) Irradiation Facilities for Food Processing
  • ASTM E1462-12

    Test Methods for:Insulation Integrity and Ground Path Continuity of Photovoltaic Modules
  • ASTM E1538-09

    Practice for:Use of the Ethanol-Chlorobenzene Dosimetry System
  • ASTM E1539-05R13

    Guide for:Use of Radiation-Sensitive Indicators
  • ASTM E1540-04R12

    Practice for:Use of a Radiochromic Liquid Dosimetry System
  • ASTM E1597-10R15

    Test Method for:Saltwater Pressure Immersion and Temperature Testing of Photovoltaic Modules for Marine Environments
  • ASTM E1607-13

    Practice for:Use of an Alanine-EPR Dosimetry System
  • ASTM E1608-15

    Practice for:Dosimetry in an X-Ray (Bremsstrahlung) Facility for Radiation Processing at Energies between 50 keV and 7.5 MeV
  • ASTM E1631-13

    Practice for:Use of Calorimetric Dosimetry Systems for Electron Beam Dose Measurements and Routine Dosimetry System Calibration
  • ASTM E1649-15

    Practice for:Dosimetry in an Electron Beam Facility for Radiation Processing at Energies Between 300 keV and 25 MeV
  • ASTM E1650-13

    Practice for:Use of a Cellulose Triacetate Dosimetry System
  • ASTM E1675-04R12

    Practice for:Sampling Two-Phase Geothermal Fluid for Purposes of Chemical Analysis
  • ASTM E1702-13

    Practice for:Dosimetry in a Gamma Facility for Radiation Processing
  • ASTM E1707-15

    Guide for:Estimation of Measurement Uncertainty in Dosimetry for Radiation Processing
  • ASTM E1760-09

    Guide for:Unrestricted Disposition of Bulk Materials Containing Residual Amounts of Radioactivity
  • ASTM E1799-12

    Practice for:Visual Inspections of Photovoltaic Modules
  • ASTM E1802-12

    Test Methods for:Wet Insulation Integrity Testing of Photovoltaic Modules
  • ASTM E1818-13

    Practice for:Dosimetry in an Electron Beam Facility for Radiation Processing at Energies Between 80 and 300 keV
  • ASTM E1819-15

    Guide for:Environmental Monitoring Plans for Decommissioning of Nuclear Facilities
  • ASTM E1830-15

    Test Methods for:Determining Mechanical Integrity of Photovoltaic Modules
  • ASTM E1854-13

    Practice for:Ensuring Test Consistency in Neutron-Induced Displacement Damage of Electronic Parts
  • ASTM E1855-15

    Test Method for:Use of 2N2222A Silicon Bipolar Transistors as Neutron Spectrum Sensors and Displacement Damage Monitors
  • ASTM E1892-15

    Guide for:Preparing Characterization Plans for Decommissioning Nuclear Facilities
  • ASTM E1893-15

    Guide for:Selection and Use of Portable Radiological Survey Instruments for Performing In Situ Radiological Assessments to Support Unrestricted Release from Further Regulatory Controls
  • ASTM E1894-13A

    Guide for:Selecting Dosimetry Systems for Application in Pulsed X-Ray Sources
  • ASTM E1900-09

    Guide for:Dosimetry in Radiation Research on Food and Agricultural Products
  • ASTM E1939-05R13

    Practice for:Blood Irradiation Dosimetry
  • ASTM E1940-13

    Guide for:Dosimetry for Sterile Insect Release Programs
  • ASTM E1956-13

    Practice for:Use of a Thermoluminescence-Dosimetry System (TLD System) for Radiation Processing
  • ASTM E2005-10R15

    Guide for:Benchmark Testing of Reactor Dosimetry in Standard and Reference Neutron Fields
  • ASTM E2006-10

    Guide for:Benchmark Testing of Light Water Reactor Calculations
  • ASTM E2047-10R15

    Test Method for:Wet Insulation Integrity Testing of Photovoltaic Arrays
  • ASTM E2059-15

    Practice for:Application and Analysis of Nuclear Research Emulsions for Fast Neutron Dosimetry
  • ASTM E2116-13

    Practice for:Dosimetry for a Self-Contained Dry-Storage Gamma Irradiator
  • ASTM E2215-15

    Practice for:Evaluation of Surveillance Capsules from Light-Water Moderated Nuclear Power Reactor Vessels
  • ASTM E2216-02R13

    Guide for:Evaluating Disposal Options for Concrete from Nuclear Facility Decommissioning
  • ASTM E2232-10

    Guide for:Selection and Use of Mathematical Methods for Calculating Absorbed Dose in Radiation Processing Applications
  • ASTM E2236-10R15

    Test Methods for:Measurement of Electrical Performance and Spectral Response of Nonconcentrator Multijunction Photovoltaic Cells and Modules
  • ASTM E2303-15

    Guide for:Absorbed-Dose Mapping in Radiation Processing Facilities
  • ASTM E2304-03R11

    Practice for:Use of a LiF Photo-Fluorescent Film Dosimetry System
  • ASTM E2381-04R10

    Guide for:Dosimetry In Radiation Processing of Fluidized Beds and Fluid Streams
  • ASTM E2420-15

    Guide for:Post-Deactivation Surveillance and Maintenance of Radiologically Contaminated Facilities
  • ASTM E2421-15

    Guide for:Preparing Waste Management Plans for Decommissioning Nuclear Facilities
  • ASTM E2449-05R13

    Guide for:Irradiation of Pre-packaged Processed Meat and Poultry Products to Control Pathogens and Other Microorganisms
  • ASTM E2450-11

    Practice for:Application of CaF2(Mn) Thermoluminescence Dosimeters in Mixed Neutron-Photon Environments
  • ASTM E2481-12

    Test Method for:Hot Spot Protection Testing of Photovoltaic Modules
  • ASTM E2527-15

    Test Method for:Electrical Performance of Concentrator Terrestrial Photovoltaic Modules and Systems Under Natural Sunlight
  • ASTM E2628-13

    Practice for:Dosimetry in Radiation Processing
  • ASTM E2685-15

    Specification for:Steel Blades Used with the Photovoltaic Module Surface Cut Test
  • ASTM E2701-13

    Guide for:Performance Characterization of Dosimeters and Dosimetry Systems for Use in Radiation Processing
  • ASTM E2766-13

    Practice for:Installation of Roof Mounted Photovoltaic Arrays on Steep-Slope Roofs
  • ASTM E2848-13

    Test Method for:Reporting Photovoltaic Non-Concentrator System Performance
  • ASTM E2908-12

    Guide for:Fire Prevention for Photovoltaic Panels, Modules, and Systems
  • ASTM E2939-13

    Practice for:Determining Reporting Conditions and Expected Capacity for Photovoltaic Non-Concentrator Systems
  • ASTM E2956-14

    Guide for:Monitoring the Neutron Exposure of LWR Reactor Pressure Vessels
  • ASTM E3006-15

    Practice for:Ultraviolet Conditioning of Photovoltaic Modules or Mini-Modules Using a Fluorescent Ultraviolet (UV) Lamp Apparatus
  • ASTM E3010-15

    Practice for:Installation, Commissioning, Operation, and Maintenance Process (ICOMP) of Photovoltaic Arrays
  • ASTM F0526-11

    Test Method for:Using Calorimeters for Total Dose Measurements in Pulsed Linear Accelerator or Flash X-ray Machines
  • ASTM F1355-06R14

    Guide for:Irradiation of Fresh Agricultural Produce as a Phytosanitary Treatment
  • ASTM F1356-08

    Practice for:Irradiation of Fresh and Frozen Red Meat and Poultry to Control Pathogens and Other Microorganisms
  • ASTM F1640-09

    Guide for:Selection and Use of Packaging Materials for Foods to Be Irradiated
  • ASTM F1736-09

    Guide for:Irradiation of Finfish and Aquatic Invertebrates Used as Food to Control Pathogens and Spoilage Microorganisms
  • ASTM F1885-04R10

    Guide for:Irradiation of Dried Spices, Herbs, and Vegetable Seasonings to Control Pathogens and Other Microorganisms