한국표준정보망(KSSN)

ASTM Annual Book 수록 리스트

핸드북  >  ASTM

    14.04 : 시험소 기계 장치:재료의 퇴화:여과:SI:화재 안전

  • ASTM D2512-95R08

    Test Method for:Compatibility of Materials with Liquid Oxygen (Impact Sensitivity Threshold and Pass-Fail Techniques)
  • ASTM E0041-92R10

    Terminology Relating To:Conditioning
  • ASTM E0095-68R11

    Specification for:Cell-Type Oven with Controlled Rates of Ventilation
  • ASTM E0123-02R12

    Specification for:Apparatus for Determination of Water by Distillation
  • ASTM E0124-94R10

    Specification for:Weighing and Drying Apparatus for Microchemical Analysis
  • ASTM E0128-99R11

    Test Method for:Maximum Pore Diameter and Permeability of Rigid Porous Filters for Laboratory Use
  • ASTM E0133-92R10

    Specification for:Distillation Equipment
  • ASTM E0144-14

    Practice for:Safe Use of Oxygen Combustion Vessels
  • ASTM E0145-94R11

    Specification for:Gravity-Convection and Forced-Ventilation Ovens
  • ASTM E0147-61R11

    Specification for:Apparatus for Microdetermination of Nitrogen by Kjeldahl Method
  • ASTM E0191-64R11

    Specification for:Apparatus For Microdetermination of Carbon and Hydrogen in Organic and Organo-Metallic Compounds
  • ASTM E0193-94R10

    Specification for:Laboratory Glass Micropipets
  • ASTM E0205-96R10

    Specification for:Glass and Oxygen Combustion Flask
  • ASTM E0210-63R10

    Specification for:Microscope Objective Thread
  • ASTM E0211-82R10

    Specification for:Cover Glasses and Glass Slides for Use in Microscopy
  • ASTM E0236-66R11

    Specification for:Apparatus for Microdetermination of Alkoxyl Groups
  • ASTM E0237-02R12

    Specification for:Laboratory Glass Microvolumetric Vessels (Volumetric Flasks and Centrifuge Tubes)
  • ASTM E0287-02R12

    Specification for:Laboratory Glass Graduated Burets
  • ASTM E0288-10

    Specification for:Laboratory Glass Volumetric Flasks
  • ASTM E0319-85R14

    Practice for the:Evaluation of Single-Pan Mechanical Balances
  • ASTM E0438-92R11

    Specification for:Glasses in Laboratory Apparatus
  • ASTM E0542-01R12

    Practice for:Calibration of Laboratory Volumetric Apparatus
  • ASTM E0617-13

    Specification for:Laboratory Weights and Precision Mass Standards
  • ASTM E0671-98R10

    Specification for:Maximum Permissible Thermal Residual Stress in Annealed Glass Laboratory Apparatus
  • ASTM E0672-87R11

    Specification for:Disposable Glass Micropipets
  • ASTM E0675-02R12

    Specification for:Interchangeable Taper-Ground Stopcocks And Stoppers
  • ASTM E0676-02R12

    Specification for:Interchangeable Taper-Ground Joints
  • ASTM E0677-94R10

    Specification for:Interchangeable Spherical Ground Joints
  • ASTM E0694-99R10

    Specification for:Laboratory Glass Volumetric Apparatus
  • ASTM E0714-94R15

    Specification for:Disposable Glass Serological Pipets
  • ASTM E0715-80R11

    Specification for:Gravity-Convection and Forced-Circulation Water Baths
  • ASTM E0732-80R11

    Specification for:Disposable Pasteur-Type Pipet
  • ASTM E0734-80R15

    Specification for:Disposable Glass Blood Sample Capillary Tube (Microhematocrit)
  • ASTM E0784-89R11

    Specification for:Clamps, Utility, Laboratory, and Holders, Buret and Clamp
  • ASTM E0785-81R11

    Specification for:Crucibles, Ignition, Laboratory, Metal
  • ASTM E0786-81R11

    Specification for:Dishes, Evaporating, Platinum
  • ASTM E0787-81R11

    Specification for:Disposable Glass Micro Blood Collection Pipets
  • ASTM E0788-97R13

    Specification for:Pipet, Blood Diluting
  • ASTM E0816-15

    Test Method for:Calibration of Pyrheliometers by Comparison to Reference Pyrheliometers
  • ASTM E0824-10

    Test Method for:Transfer of Calibration From Reference to Field Radiometers
  • ASTM E0832-81R13

    Specification for:Laboratory Filter Papers
  • ASTM E0890-94R15

    Specification for:Disposable Glass Culture Tubes
  • ASTM E0898-88R13

    Test Method of Testing:Top-Loading, Direct-Reading Laboratory Scales and Balances
  • ASTM E0911-98R15

    Specification for:Glass Stopcocks with Polytetrafluoroethylene (PTFE) Plugs
  • ASTM E0920-97R13

    Specification for:Commercially Packaged Laboratory Apparatus
  • ASTM E0921-97R10

    Specification for:Export Packaged Laboratory Apparatus
  • ASTM E0923-97R13

    Specification for:Glass Westergren Tube, Reusable
  • ASTM E0934-94R15

    Specification for:Serological Pipet, Disposable Plastic
  • ASTM E0960-93R13

    Specification for:Laboratory Glass Beakers
  • ASTM E0961-97R13

    Specification for:Blood Sedimentation Tube, Wintrobe, Glass, Reusable
  • ASTM E0969-02R12

    Specification for:Glass Volumetric (Transfer) Pipets
  • ASTM E0982-94R15

    Specification for:Laboratory Glass Test Tubes
  • ASTM E1043-00R10

    Specification for:Pipets, Milk and Cream Examination
  • ASTM E1044-96R11

    Specification for:Glass Serological Pipets (General Purpose and Kahn)
  • ASTM E1045-00R10

    Specification for:Pipet, Sahli Hemoglobin
  • ASTM E1046-85R15

    Specification for:Glass Westergren Tube, Disposable
  • ASTM E1047-85R15

    Specification for:Blood Sedimentation Tube, Wintrobe, Glass, Disposable
  • ASTM E1048-88R15

    Specification for:Color-Coding Pipets or Containers Coated With Anticoagulants
  • ASTM E1092-91R10

    Specification for:Glass Micro Folin Pipet, Disposable
  • ASTM E1093-91R12

    Specification for:Glass Prothrombin Pipet, Disposable
  • ASTM E1094-04R15

    Specification for:Pharmaceutical Glass Graduates
  • ASTM E1095-99R10

    Specification for:Common Laboratory Glass Funnels
  • ASTM E1096-86R11

    Specification for:Laboratory Glass Separatory Funnels
  • ASTM E1133-86R10

    Practice for:Performance Testing of Packaged Laboratory Apparatus for United States Government Procurements
  • ASTM E1154-14

    Specification for:Piston or Plunger Operated Volumetric Apparatus
  • ASTM E1157-87R11

    Specification for:Sampling and Testing of Reusable Laboratory Glassware
  • ASTM E1189-00R10

    Specification for:Micro-Burets (Koch Style)
  • ASTM E1270-88R14

    Test Method for:Equal Arm Balances
  • ASTM E1272-02R12

    Specification for Laboratory Glass:Graduated Cylinders
  • ASTM E1273-88R13

    Specification for:Color Coding of Reusable Laboratory Pipets
  • ASTM E1292-94R11

    Specification for:Gravity Convection and Forced Ventilation Incubators
  • ASTM E1293-02R12

    Specification for:Glass Measuring Pipets
  • ASTM E1377-99R10

    Specification for:Laboratory Glass Kjeldahl Flasks
  • ASTM E1378-99R10

    Specification for:Laboratory Glass Multiple Neck Distilling/Boiling Flasks
  • ASTM E1379-90R10

    Specification for:Laboratory Glass Dewar Flask
  • ASTM E1380-90R15

    Specification for:Color Coding of Laboratory Pipets with Multiple Graduations, 0.1 mL and Larger, But Excluding Disposable Prothrombin and Disposable Micropipets
  • ASTM E1403-97R13

    Specification for:Laboratory Glass Boiling Flasks
  • ASTM E1404-94R13

    Specification for:Laboratory Glass Conical Flasks
  • ASTM E1405-98R10

    Specification for:Laboratory Glass Distillation Flasks
  • ASTM E1406-95R10

    Specification for:Laboratory Glass Filter Flasks
  • ASTM E1522-93R13

    Specification for:Autoclavable Protective Coatings on Laboratory Glassware
  • ASTM E1878-97R13

    Specification for:Laboratory Glass Volumetric Flasks, Special Use
  • ASTM G0007_G0007M-13

    Practice for:Atmospheric Environmental Exposure Testing of Nonmetallic Materials
  • ASTM G0021-15

    Practice for:Determining Resistance of Synthetic Polymeric Materials to Fungi
  • ASTM G0024-13

    Practice for:Conducting Exposures to Daylight Filtered Through Glass
  • ASTM G0029-96R10

    Practice for:Determining Algal Resistance of Plastic Films
  • ASTM G0063-15

    Guide for:Evaluating Nonmetallic Materials for Oxygen Service
  • ASTM G0072_G0072M-15

    Test Method for:Autogenous Ignition Temperature of Liquids and Solids in a High-Pressure Oxygen-Enriched Environment
  • ASTM G0074-13

    Test Method for:Ignition Sensitivity of Nonmetallic Materials and Components by Gaseous Fluid Impact
  • ASTM G0086-98AR11

    Test Method for:Determining Ignition Sensitivity of Materials to Mechanical Impact in Ambient Liquid Oxygen and Pressurized Liquid and Gaseous Oxygen Environments
  • ASTM G0088-13

    Guide for:Designing Systems for Oxygen Service
  • ASTM G0090-10

    Practice for:Performing Accelerated Outdoor Weathering of Nonmetallic Materials Using Concentrated Natural Sunlight
  • ASTM G0093-03R11

    Practice for:Cleaning Methods and Cleanliness Levels for Material and Equipment Used in Oxygen-Enriched Environments
  • ASTM G0094-05R14

    Guide for:Evaluating Metals for Oxygen Service
  • ASTM G0113-14

    Terminology:Relating to Natural and Artificial Weathering Tests of Nonmetallic Materials
  • ASTM G0114-14

    Practices for:Evaluating the Age Resistance of Polymeric Materials Used in Oxygen Service
  • ASTM G0120-15

    Practice for:Determination of Soluble Residual Contamination by Soxhlet Extraction
  • ASTM G0121-98R15E01

    Practice for:Preparation of Contaminated Test Coupons for the Evaluation of Cleaning Agents
  • ASTM G0122-96R15E01

    Test Method for:Evaluating the Effectiveness of Cleaning Agents
  • ASTM G0124-10

    Test Method for:Determining the Combustion Behavior of Metallic Materials in Oxygen-Enriched Atmospheres
  • ASTM G0125-00R15

    Test Method for:Measuring Liquid and Solid Material Fire Limits in Gaseous Oxidants
  • ASTM G0126-00R08

    Terminology Relating to the:Compatibility and Sensitivity of Materials in Oxygen Enriched Atmospheres
  • ASTM G0127-15

    Guide for the:Selection of Cleaning Agents for Oxygen-Enriched Systems
  • ASTM G0128_G0128M-15

    Guide for:Control of Hazards and Risks in Oxygen Enriched Systems
  • ASTM G0130-12

    Test Method for:Calibration of Narrow- and Broad-Band Ultraviolet Radiometers Using a Spectroradiometer
  • ASTM G0131-96R08

    Practice for:Cleaning of Materials and Components by Ultrasonic Techniques
  • ASTM G0136-03R09

    Practice for:Determination of Soluble Residual Contaminants in Materials by Ultrasonic Extraction
  • ASTM G0138-12

    Test Method for:Calibration of a Spectroradiometer Using a Standard Source of Irradiance
  • ASTM G0141-09R13

    Guide for:Addressing Variability in Exposure Testing of Nonmetallic Materials
  • ASTM G0144-01R14

    Test Method for:Determination of Residual Contamination of Materials and Components by Total Carbon Analysis Using a High Temperature Combustion Analyzer
  • ASTM G0145-08

    Guide for:Studying Fire Incidents in Oxygen Systems
  • ASTM G0147-09

    Practice for:Conditioning and Handling of Nonmetallic Materials for Natural and Artificial Weathering Tests
  • ASTM G0151-10

    Practice for:Exposing Nonmetallic Materials in Accelerated Test Devices that Use Laboratory Light Sources
  • ASTM G0152-13

    Practice for:Operating Open Flame Carbon Arc Light Apparatus for Exposure of Nonmetallic Materials
  • ASTM G0153-13

    Practice for:Operating Enclosed Carbon Arc Light Apparatus for Exposure of Nonmetallic Materials
  • ASTM G0154-12A

    Practice for:Operating Fluorescent Ultraviolet (UV) Lamp Apparatus for Exposure of Nonmetallic Materials
  • ASTM G0155-13

    Practice for:Operating Xenon Arc Light Apparatus for Exposure of Non-Metallic Materials
  • ASTM G0156-09

    Practice for:Selecting and Characterizing Weathering Reference Materials
  • ASTM G0160-12

    Practice for:Evaluating Microbial Susceptibility of Nonmetallic Materials By Laboratory Soil Burial
  • ASTM G0166-00R11

    Guide for:Statistical Analysis of Service Life Data
  • ASTM G0167-15

    Test Method for:Calibration of a Pyranometer Using a Pyrheliometer
  • ASTM G0169-01R13

    Guide for:Application of Basic Statistical Methods to Weathering Tests
  • ASTM G0172-02R10E01

    Guide for:Statistical Analysis of Accelerated Service Life Data
  • ASTM G0173-03R12

    Tables for:Reference Solar Spectral Irradiances: Direct Normal and Hemispherical on 37° Tilted Surface
  • ASTM G0175-13

    Test Method for:Evaluating the Ignition Sensitivity and Fault Tolerance of Oxygen Pressure Regulators Used for Medical and Emergency Applications
  • ASTM G0177-03R12

    Tables for:Reference Solar Ultraviolet Spectral Distributions: Hemispherical on 37° Tilted Surface
  • ASTM G0178-09

    Practice for:Determining the Activation Spectrum of a Material (Wavelength Sensitivity to an Exposure Source) Using the Sharp Cut-On Filter or Spectrographic Technique
  • ASTM G0179-04R11

    Specification for:Metal Black Panel and White Panel Temperature Devices for Natural Weathering Tests
  • ASTM G0183-15

    Practice for:Field Use of Pyranometers, Pyrheliometers and UV Radiometers
  • ASTM G0197-14

    Table for:Reference Solar Spectral Distributions: Direct and Diffuse on 20° Tilted and Vertical Surfaces
  • ASTM G0201-09

    Practice for:Conducting Exposures in Outdoor Glass-Covered Exposure Apparatus with Air Circulation
  • ASTM G0207-11

    Test Method for:Indoor Transfer of Calibration from Reference to Field Pyranometers