한국표준정보망(KSSN)

ASTM Annual Book 수록 리스트

핸드북  >  ASTM

    14.05 : 통계 방법; 화학 물질의 잠재적 위험성; 열측정; 약품 제조

  • ASTM E0029-13

    Practice for:Using Significant Digits in Test Data to Determine Conformance with Specifications
  • ASTM E0105-10

    Practice for:Probability Sampling of Materials
  • ASTM E0122-09E01

    Practice for:Calculating Sample Size to Estimate, With Specified Precision, the Average for a Characteristic of a Lot or Process
  • ASTM E0141-10

    Practice for:Acceptance of Evidence Based on the Results of Probability Sampling
  • ASTM E0177-14

    Practice for:Use of the Terms Precision and Bias in ASTM Test Methods
  • ASTM E0178-08

    Practice for:Dealing With Outlying Observations
  • ASTM E0228-11

    Test Method for:Linear Thermal Expansion of Solid Materials With a Push-Rod Dilatometer
  • ASTM E0289-04R10

    Test Method for:Linear Thermal Expansion of Rigid Solids with Interferometry
  • ASTM E0456-13AE02

    Terminology:Relating to Quality and Statistics
  • ASTM E0473-14

    Terminology Relating to:Thermal Analysis and Rheology
  • ASTM E0487-14

    Test Method for:Constant-Temperature Stability of Chemical Materials
  • ASTM E0502-07R13

    Test Method for:Selection and Use of ASTM Standards for the Determination of Flash Point of Chemicals by Closed Cup Methods
  • ASTM E0537-12

    Test Method for:The Thermal Stability of Chemicals by Differential Scanning Calorimetry
  • ASTM E0582-07R13E01

    Test Method for:Minimum Ignition Energy and Quenching Distance in Gaseous Mixtures
  • ASTM E0659-15

    Test Method for:Autoignition Temperature of Chemicals
  • ASTM E0680-79R11E01

    Test Method for:Drop Weight Impact Sensitivity of Solid-Phase Hazardous Materials
  • ASTM E0681-09R15

    Test Method for:Concentration Limits of Flammability of Chemicals (Vapors and Gases)
  • ASTM E0691-14

    Practice for:Conducting an Interlaboratory Study to Determine the Precision of a Test Method
  • ASTM E0698-11

    Test Method for:Arrhenius Kinetic Constants for Thermally Unstable Materials Using Differential Scanning Calorimetry and the Flynn/Wall/Ozawa Method
  • ASTM E0793-06R12

    Test Method for:Enthalpies of Fusion and Crystallization by Differential Scanning Calorimetry
  • ASTM E0794-06R12

    Test Method for:Melting And Crystallization Temperatures By Thermal Analysis
  • ASTM E0831-14

    Test Method for:Linear Thermal Expansion of Solid Materials by Thermomechanical Analysis
  • ASTM E0918-83R11

    Practice for:Determining Limits of Flammability of Chemicals at Elevated Temperature and Pressure
  • ASTM E0928-08R14

    Test Method for:Purity by Differential Scanning Calorimetry
  • ASTM E0967-08R14

    Test Method for:Temperature Calibration of Differential Scanning Calorimeters and Differential Thermal Analyzers
  • ASTM E0968-02R14

    Practice for:Heat Flow Calibration of Differential Scanning Calorimeters
  • ASTM E1131-08R14

    Test Method for:Compositional Analysis by Thermogravimetry
  • ASTM E1142-15

    Terminology:Relating to Thermophysical Properties
  • ASTM E1169-14

    Practice for:Conducting Ruggedness Tests
  • ASTM E1225-13

    Test Method for:Thermal Conductivity of Solids Using the Guarded-Comparative-Longitudinal Heat Flow Technique
  • ASTM E1226-12A

    Test Method for:Explosibility of Dust Clouds
  • ASTM E1231-10

    Practice for:Calculation of Hazard Potential Figures-of-Merit for Thermally Unstable Materials
  • ASTM E1232-07R13

    Test Method for:Temperature Limit of Flammability of Chemicals
  • ASTM E1269-11

    Test Method for:Determining Specific Heat Capacity by Differential Scanning Calorimetry
  • ASTM E1285

    Guide for:Identification of Bacteriophage Lambda (λ) or Its DNA
  • ASTM E1286

    Guide for:Identification of Herpes Simplex Virus or Its DNA
  • ASTM E1298

    Guide for:Determination of Purity, Impurities, and Contaminants in Biological Drug Products
  • ASTM E1323-15

    Guide for:Evaluating Laboratory Measurement Practices and the Statistical Analysis of the Resulting Data
  • ASTM E1325-02R08

    Terminology Relating to:Design of Experiments
  • ASTM E1356-08R14

    Test Method for Assignment of the:Glass Transition Temperatures by Differential Scanning Calorimetry
  • ASTM E1363-13

    Test Method for:Temperature Calibration of Thermomechanical Analyzers
  • ASTM E1402-13

    Guide for:Sampling Design
  • ASTM E1445-08R15

    Terminology Relating to:Hazard Potential of Chemicals
  • ASTM E1461-13

    Test Method for:Thermal Diffusivity by the Flash Method
  • ASTM E1470

    Test Method for:Characterization of Proteins by Electrophoretic Mobility
  • ASTM E1488-12E01

    Guide for:Statistical Procedures to Use in Developing and Applying Test Methods
  • ASTM E1491-06R12

    Test Method for:Minimum Autoignition Temperature of Dust Clouds
  • ASTM E1493

    Guide for:Identification of Bacteriophage M13 or Its DNA
  • ASTM E1515-14

    Test Method for:Minimum Explosible Concentration of Combustible Dusts
  • ASTM E1530-11

    Test Method for:Evaluating the Resistance to Thermal Transmission of Materials by the Guarded Heat Flow Meter Technique
  • ASTM E1531

    Practice for:Detection of Mycoplasma Contamination of Cell Cultures by Growth on Agarose Medium
  • ASTM E1532

    Practice for:Detection of Mycoplasma Contamination of Cell Cultures by Use of Bisbenzamide DNA-Binding Fluorochrome
  • ASTM E1533

    Practice for:Indirect Detection of Mycoplasma in Cell Culture by 4`-6-Diamidino-2-2 Phenylindole (DAPI) Staining
  • ASTM E1536

    Practice for:Detection of Mycoplasma Contamination of Bovine Serum by Large Volume Method
  • ASTM E1545-11

    Test Method for:Assignment of the Glass Transition Temperature by Thermomechanical Analysis
  • ASTM E1564-00R14

    Guide for:Design and Maintenance of Low-Temperature Storage Facilities for Maintaining Cryopreserved Biological Materials
  • ASTM E1565-00R14

    Guide for:Inventory Control and Handling of Biological Material Maintained at Low Temperatures
  • ASTM E1566-00R14

    Guide for:Handling Hazardous Biological Materials in Liquid Nitrogen
  • ASTM E1582-14

    Practice for:Calibration of Temperature Scale for Thermogravimetry
  • ASTM E1640-13

    Test Method for:Assignment of the Glass Transition Temperature By Dynamic Mechanical Analysis
  • ASTM E1641-15

    Test Method for:Decomposition Kinetics by Thermogravimetry Using the Ozawa/Flynn/Wall Method
  • ASTM E1719-12

    Test Method for:Vapor Pressure of Liquids by Ebulliometry
  • ASTM E1759

    Test Method for:Isoaspartic Acid in Proteins: Method for the Determination of Asparagine Deamidation Products
  • ASTM E1782-14

    Test Method for:Determining Vapor Pressure by Thermal Analysis
  • ASTM E1824-13

    Test Method for:Assignment of a Glass Transition Temperature Using Thermomechanical Analysis: Tension Method
  • ASTM E1858-08R15E01

    Test Methods for:Determining Oxidation Induction Time of Hydrocarbons by Differential Scanning Calorimetry
  • ASTM E1860-13

    Test Method for:Elapsed Time Calibration of Thermal Analyzers
  • ASTM E1867-13

    Test Method for:Temperature Calibration of Dynamic Mechanical Analyzers
  • ASTM E1868-10R15

    Test Methods for:Loss-On-Drying by Thermogravimetry
  • ASTM E1873

    Guide for:Detection of Nucleic Acid Sequences by the Polymerase Chain Reaction Technique
  • ASTM E1877-15

    Practice for:Calculating Thermal Endurance of Materials from Thermogravimetric Decomposition Data
  • ASTM E1952-11

    Test Method for:Thermal Conductivity and Thermal Diffusivity by Modulated Temperature Differential Scanning Calorimetry
  • ASTM E1953-14

    Practice for:Description of Thermal Analysis and Rheology Apparatus
  • ASTM E1970-11

    Practice for:Statistical Treatment of Thermoanalytical Data
  • ASTM E1981-98R12E02

    Guide for:Assessing Thermal Stability of Materials by Methods of Accelerating Rate Calorimetry
  • ASTM E1994-09R13

    Practice for:Use of Process Oriented AOQL and LTPD Sampling Plans
  • ASTM E2008-08R14E01

    Test Methods for:Volatility Rate by Thermogravimetry
  • ASTM E2009-08R14E01

    Test Methods for:Oxidation Onset Temperature of Hydrocarbons by Differential Scanning Calorimetry
  • ASTM E2012-06R12

    Guide for:the Preparation of a Binary Chemical Compatibility Chart
  • ASTM E2019-03R13

    Test Method for:Minimum Ignition Energy of a Dust Cloud in Air
  • ASTM E2021-15

    Test Method for:Hot-Surface Ignition Temperature of Dust Layers
  • ASTM E2040-08R14

    Test Method for:Mass Scale Calibration of Thermogravimetric Analyzers
  • ASTM E2041-13E01

    Test Method for:Estimating Kinetic Parameters by Differential Scanning Calorimeter Using the Borchardt and Daniels Method
  • ASTM E2046-14

    Test Method for:Reaction Induction Time by Thermal Analysis
  • ASTM E2048

    Guide for:Detection of Nucleic Acids of the Mycobacterium Tuberculosis Complex and Other Pathogenic Mycobacteria by the Polymerase Chain Reaction Technique
  • ASTM E2069-06R12

    Test Method for:Temperature Calibration on Cooling of Differential Scanning Calorimeters
  • ASTM E2070-13

    Test Method for:Kinetic Parameters by Differential Scanning Calorimetry Using Isothermal Methods
  • ASTM E2071-00R15

    Practice for:Calculating Heat of Vaporization or Sublimation from Vapor Pressure Data
  • ASTM E2079-07R13

    Test Methods for:Limiting Oxygen (Oxidant) Concentration in Gases and Vapors
  • ASTM E2092-13

    Test Method for:Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
  • ASTM E2097-00R14

    Guide for:Determining the Impact of Extractables from Non-Metallic Materials on the Safety of Biotechnology Products
  • ASTM E2113-13

    Test Method for:Length Change Calibration of Thermomechanical Analyzers
  • ASTM E2160-04R12

    Test Method for:Heat of Reaction of Thermally Reactive Materials by Differential Scanning Calorimetry
  • ASTM E2161-15

    Terminology Relating to:Performance Validation in Thermal Analysis and Rheology
  • ASTM E2206-11R15

    Test Method for:Force Calibration of Thermomechanical Analyzers
  • ASTM E2234-09R13

    Practice for:Sampling a Stream of Product by Attributes Indexed by AQL
  • ASTM E2253-11

    Test Method for:Temperature and Enthalpy Measurement Validation of Differential Scanning Calorimeters
  • ASTM E2254-13

    Test Method for:Storage Modulus Calibration of Dynamic Mechanical Analyzers
  • ASTM E2281-15

    Practice for:Process Capability and Performance Measurement
  • ASTM E2282-14

    Guide for:Defining the Test Result of a Test Method
  • ASTM E2334-09R13E01

    Practice for:Setting an Upper Confidence Bound For a Fraction or Number of Non-Conforming items, or a Rate of Occurrence for Non-conformities, Using Attribute Data, When There is a Zero Response in the Sample
  • ASTM E2347-11

    Test Method for:Indentation Softening Temperature by Thermomechanical Analysis
  • ASTM E2363-14

    Terminology Relating to:Process Analytical Technology in the Pharmaceutical Industry
  • ASTM E2402-11

    Test Method for:Mass Loss and Residue Measurement Validation of Thermogravimetric Analyzers
  • ASTM E2403-06R12

    Test Method for:Sulfated Ash of Organic Materials by Thermogravimetry
  • ASTM E2425-11

    Test Method for:Loss Modulus Conformance of Dynamic Mechanical Analyzers
  • ASTM E2474-14

    Practice for:Pharmaceutical Process Design Utilizing Process Analytical Technology
  • ASTM E2475-10

    Guide for:Process Understanding Related to Pharmaceutical Manufacture and Control
  • ASTM E2476-09

    Guide for:Risk Assessment and Risk Control as it Impacts the Design, Development, and Operation of PAT Processes for Pharmaceutical Manufacture
  • ASTM E2489-11

    Practice for:Statistical Analysis of One-Sample and Two-Sample Interlaboratory Proficiency Testing Programs
  • ASTM E2500-13

    Guide for:Specification, Design, and Verification of Pharmaceutical and Biopharmaceutical Manufacturing Systems and Equipment
  • ASTM E2503-13E01

    Practice for:Qualification of Basket and Paddle Dissolution Apparatus
  • ASTM E2509-14

    Test Method for:Temperature Calibration of Rheometers in Isothermal Mode
  • ASTM E2510-07R13

    Test Method for:Torque Calibration or Conformance of Rheometers
  • ASTM E2537-08

    Guide for:Application of Continuous Quality Verification to Pharmaceutical and Biopharmaceutical Manufacturing
  • ASTM E2550-11

    Test Method for:Thermal Stability by Thermogravimetry
  • ASTM E2551-13

    Test Method for:Humidity Calibration (or Conformation) of Humidity Generators for Use with Thermogravimetric Analyzers
  • ASTM E2554-13

    Practice for:Estimating and Monitoring the Uncertainty of Test Results of a Test Method Using Control Chart Techniques
  • ASTM E2555-07R12

    Practice for:Factors and Procedures for Applying the MIL-STD-105 Plans in Life and Reliability Inspection
  • ASTM E2584-14

    Practice for:Thermal Conductivity of Materials Using a Thermal Capacitance (Slug) Calorimeter
  • ASTM E2585-09R15

    Practice for:Thermal Diffusivity by the Flash Method
  • ASTM E2586-14

    Practice for:Calculating and Using Basic Statistics
  • ASTM E2587-15

    Practice for:Use of Control Charts in Statistical Process Control
  • ASTM E2602-09R15

    Test Methods for:the Assignment of the Glass Transition Temperature by Modulated Temperature Differential Scanning Calorimetry
  • ASTM E2603-15

    Practice for:Calibration of Fixed-Cell Differential Scanning Calorimeters
  • ASTM E2629-11

    Guide for:Verification of Process Analytical Technology (PAT) Enabled Control Systems
  • ASTM E2655-14

    Guide for:Reporting Uncertainty of Test Results and Use of the Term Measurement Uncertainty in ASTM Test Methods
  • ASTM E2656-10

    Practice for:Real-time Release Testing of Pharmaceutical Water for the Total Organic Carbon Attribute
  • ASTM E2696-09R13

    Practice for:Life and Reliability Testing Based on the Exponential Distribution
  • ASTM E2709-14E01

    Practice for:Demonstrating Capability to Comply with an Acceptance Procedure
  • ASTM E2716-09R14

    Test Method for:Determining Specific Heat Capacity by Sinusoidal Modulated Temperature Differential Scanning Calorimetry
  • ASTM E2744-10R15

    Test Method for:Pressure Calibration of Thermal Analyzers
  • ASTM E2762-10R14

    Practice for:Sampling a Stream of Product by Variables Indexed by AQL
  • ASTM E2769-15

    Test Method for:Elastic Modulus by Thermomechanical Analysis Using Three-Point Bending and Controlled Rate of Loading
  • ASTM E2781-11

    Practice for:Evaluation of Methods for Determination of Kinetic Parameters by Thermal Analysis
  • ASTM E2782-11E01

    Guide for:Measurement Systems Analysis (MSA)
  • ASTM E2810-11E02

    Practice for:Demonstrating Capability to Comply with the Test for Uniformity of Dosage Units
  • ASTM E2819-11R15

    Practice for:Single- and Multi-Level Continuous Sampling of a Stream of Product by Attributes Indexed by AQL
  • ASTM E2888-12

    Practice for:Process for Inactivation of Rodent Retrovirus by pH
  • ASTM E2890-12E01

    Test Method for:Kinetic Parameters for Thermally Unstable Materials by Differential Scanning Calorimetry Using the Kissinger Method
  • ASTM E2891-13

    Guide for:Multivariate Data Analysis in Pharmaceutical Development and Manufacturing Applications
  • ASTM E2898-14

    Guide for:Risk-Based Validation of Analytical Methods for PAT Applications
  • ASTM E2910-12

    Guide for:Preferred Methods for Acceptance of Product
  • ASTM E2918-13

    Test Method for:Performance Validation of Thermomechanical Analyzers
  • ASTM E2931-13

    Test Method for:Limiting Oxygen (Oxidant) Concentration of Combustible Dust Clouds
  • ASTM E2935-15

    Practice for:Conducting Equivalence Testing in Laboratory Applications
  • ASTM E2958-14

    Test Methods for:Kinetic Parameters by Factor Jump/Modulated Thermogravimetry
  • ASTM E2968-14

    Guide for:Application of Continuous Processing in the Pharmaceutical Industry
  • ASTM E2975-15

    Test Method for:Calibration of Concentric Cylinder Rotational Viscometers
  • ASTM E3007-15

    Practice for:Kinetic Values Used to Evaluate the Study of Decomposition Reactions by Thermogravimetry
  • ASTM F0838-15A

    Test Method for:Determining Bacterial Retention of Membrane Filters Utilized for Liquid Filtration