한국표준정보망(KSSN)

ASTM Annual Book 수록 리스트

핸드북  >  ASTM

    15.03 : 공간시물레이션:항공우주재료:고율섬유와 합성물

  • ASTM C0271_C0271M-11

    Test Method for:Density of Sandwich Core Materials
  • ASTM C0272_C0272M-12

    Test Method for:Water Absorption of Core Materials for Sandwich Constructions
  • ASTM C0273_C0273M-11

    Test Method for:Shear Properties of Sandwich Core Materials
  • ASTM C0274

    Terminology of:Structural Sandwich Constructions
  • ASTM C0297_C0297M-15

    Test Method for:Flatwise Tensile Strength of Sandwich Constructions
  • ASTM C0363_C0363M-09R15

    Test Method for:Node Tensile Strength of Honeycomb Core Materials
  • ASTM C0364_C0364M-07R12

    Test Method for:Edgewise Compressive Strength of Sandwich Constructions
  • ASTM C0365_C0365M-11A

    Test Method for:Flatwise Compressive Properties of Sandwich Cores
  • ASTM C0366_C0366M-11

    Test Methods for:Measurement of Thickness of Sandwich Cores
  • ASTM C0393_C0393M-11E01

    Test Method for:Core Shear Properties of Sandwich Constructions by Beam Flexure
  • ASTM C0394_C0394M-13

    Test Method for:Shear Fatigue of Sandwich Core Materials
  • ASTM C0480_C0480M-08R15

    Test Method for:Flexure Creep of Sandwich Constructions
  • ASTM C0481-99R11

    Test Method for:Laboratory Aging of Sandwich Constructions
  • ASTM C0613-14

    Test Method for:Constituent Content of Composite Prepreg by Soxhlet Extraction
  • ASTM D2344_D2344M-13

    Test Method for:Short-Beam Strength of Polymer Matrix Composite Materials and Their Laminates
  • ASTM D3039_D3039M-14

    Test Method for:Tensile Properties of Polymer Matrix Composite Materials
  • ASTM D3171-15

    Test Methods for:Constituent Content of Composite Materials
  • ASTM D3410_D3410M-03R08

    Test Method for:Compressive Properties of Polymer Matrix Composite Materials with Unsupported Gage Section by Shear Loading
  • ASTM D3479_D3479M-12

    Test Method for:Tension-Tension Fatigue of Polymer Matrix Composite Materials
  • ASTM D3518_D3518M-13

    Test Method for:In-Plane Shear Response of Polymer Matrix Composite Materials by Tensile Test of a ±45° Laminate
  • ASTM D3529M-10

    Test Methods for:Constituent Content of Composite Prepreg
  • ASTM D3530-97R15

    Test Method for:Volatiles Content of Composite Material Prepreg
  • ASTM D3531_D3531M-11

    Test Method for:Resin Flow of Carbon Fiber-Epoxy Prepreg
  • ASTM D3532_D3532M-12

    Test Method for:Gel Time of Carbon Fiber-Epoxy Prepreg
  • ASTM D3552-12

    Test Method for:Tensile Properties of Fiber Reinforced Metal Matrix Composites
  • ASTM D3800M-11

    Test Method for:Density of High-Modulus Fibers
  • ASTM D3878-15

    Terminology for:Composite Materials
  • ASTM D4018-11

    Test Methods for:Properties of Continuous Filament Carbon and Graphite Fiber Tows
  • ASTM D4102-82R15

    Test Method for:Thermal Oxidative Resistance of Carbon Fibers
  • ASTM D4255_D4255M-15A

    Test Method for:In-Plane Shear Properties of Polymer Matrix Composite Materials by the Rail Shear Method
  • ASTM D4762-11A

    Guide for:Testing Polymer Matrix Composite Materials
  • ASTM D5229_D5229M-14

    Test Method for:Moisture Absorption Properties and Equilibrium Conditioning of Polymer Matrix Composite Materials
  • ASTM D5379_D5379M-12

    Test Method for:Shear Properties of Composite Materials by the V-Notched Beam Method
  • ASTM D5448_D5448M-11

    Test Method for:Inplane Shear Properties of Hoop Wound Polymer Matrix Composite Cylinders
  • ASTM D5449_D5449M-11

    Test Method for:Transverse Compressive Properties of Hoop Wound Polymer Matrix Composite Cylinders
  • ASTM D5450_D5450M-12

    Test Method for:Transverse Tensile Properties of Hoop Wound Polymer Matrix Composite Cylinders
  • ASTM D5467_D5467M-97R10

    Test Method for:Compressive Properties of Unidirectional Polymer Matrix Composite Materials Using a Sandwich Beam
  • ASTM D5528-13

    Test Method for:Mode I Interlaminar Fracture Toughness of Unidirectional Fiber-Reinforced Polymer Matrix Composites
  • ASTM D5687_D5687M-95R15

    Guide for:Preparation of Flat Composite Panels with Processing Guidelines for Specimen Preparation
  • ASTM D5766_D5766M-11

    Test Method for:Open-Hole Tensile Strength of Polymer Matrix Composite Laminates
  • ASTM D5961_D5961M-13

    Test Method for:Bearing Response of Polymer Matrix Composite Laminates
  • ASTM D6115-97R11

    Test Method for:Mode I Fatigue Delamination Growth Onset of Unidirectional Fiber-Reinforced Polymer Matrix Composites
  • ASTM D6264_D6264M-12

    Test Method for:Measuring the Damage Resistance of a Fiber-Reinforced Polymer-Matrix Composite to a Concentrated Quasi-Static Indentation Force
  • ASTM D6415_D6415M-06AR13

    Test Method for:Measuring the Curved Beam Strength of a Fiber-Reinforced Polymer-Matrix Composite
  • ASTM D6416_D6416M-01R12

    Test Method for:Two-Dimensional Flexural Properties of Simply Supported Sandwich Composite Plates Subjected to a Distributed Load
  • ASTM D6484_D6484M-14

    Test Method for:Open-Hole Compressive Strength of Polymer Matrix Composite Laminates
  • ASTM D6507-11

    Practice for:Fiber Reinforcement Orientation Codes for Composite Materials
  • ASTM D6641_D6641M-14

    Test Method for:Compressive Properties of Polymer Matrix Composite Materials Using a Combined Loading Compression (CLC) Test Fixture
  • ASTM D6671_D6671M-13E01

    Test Method for:Mixed Mode I-Mode II Interlaminar Fracture Toughness of Unidirectional Fiber Reinforced Polymer Matrix Composites
  • ASTM D6742_D6742M-12

    Practice for:Filled-Hole Tension and Compression Testing of Polymer Matrix Composite Laminates
  • ASTM D6772_D6772M-15

    Test Method for:Dimensional Stability of Sandwich Core Materials
  • ASTM D6790_D6790M-14

    Test Method for:Determining Poisson's Ratio of Honeycomb Cores
  • ASTM D6856_D6856M-03R08E01

    Guide for:Testing Fabric-Reinforced “Textile” Composite Materials
  • ASTM D6873_D6873M-08R14

    Practice for:Bearing Fatigue Response of Polymer Matrix Composite Laminates
  • ASTM D7028-07R15

    Test Method for:Glass Transition Temperature (DMA Tg) of Polymer Matrix Composites by Dynamic Mechanical Analysis (DMA)
  • ASTM D7078_D7078M-12

    Test Method for:Shear Properties of Composite Materials by V-Notched Rail Shear Method
  • ASTM D7136_D7136M-15

    Test Method for:Measuring the Damage Resistance of a Fiber-Reinforced Polymer Matrix Composite to a Drop-Weight Impact Event
  • ASTM D7137_D7137M-12

    Test Method for:Compressive Residual Strength Properties of Damaged Polymer Matrix Composite Plates
  • ASTM D7205_D7205M-06R11

    Test Method for:Tensile Properties of Fiber Reinforced Polymer Matrix Composite Bars
  • ASTM D7248_D7248M-12

    Test Method for:Bearing/Bypass Interaction Response of Polymer Matrix Composite Laminates Using 2-Fastener Specimens
  • ASTM D7249_D7249M-12E01

    Test Method for:Facing Properties of Sandwich Constructions by Long Beam Flexure
  • ASTM D7250_D7250M-06R12

    Practice for:Determining Sandwich Beam Flexural and Shear Stiffness
  • ASTM D7264_D7264M-15

    Test Method for:Flexural Properties of Polymer Matrix Composite Materials
  • ASTM D7290-06R11

    Practice for:Evaluating Material Property Characteristic Values for Polymeric Composites for Civil Engineering Structural Applications
  • ASTM D7291_D7291M-15

    Test Method for:Through-Thickness “Flatwise” Tensile Strength and Elastic Modulus of a Fiber-Reinforced Polymer Matrix Composite Material
  • ASTM D7332_D7332M-15A

    Test Method for:Measuring the Fastener Pull-Through Resistance of a Fiber-Reinforced Polymer Matrix Composite
  • ASTM D7336_D7336M-12

    Test Method for:Static Energy Absorption Properties of Honeycomb Sandwich Core Materials
  • ASTM D7337_D7337M-12

    Test Method for:Tensile Creep Rupture of Fiber Reinforced Polymer Matrix Composite Bars
  • ASTM D7522_D7522M-15

    Test Method for:Pull-Off Strength for FRP Laminate Systems Bonded to Concrete Substrate
  • ASTM D7565_D7565M-10

    Test Method for:Determining Tensile Properties of Fiber Reinforced Polymer Matrix Composites Used for Strengthening of Civil Structures
  • ASTM D7615_D7615M-11

    Practice for:Open-Hole Fatigue Response of Polymer Matrix Composite Laminates
  • ASTM D7616_D7616M-11

    Test Method for:Determining Apparent Overlap Splice Shear Strength Properties of Wet Lay-Up Fiber-Reinforced Polymer Matrix Composites Used for Strengthening Civil Structures
  • ASTM D7617_D7617M-11

    Test Method for:Transverse Shear Strength of Fiber-reinforced Polymer Matrix Composite Bars
  • ASTM D7705_D7705M-12

    Test Method for:Alkali Resistance of Fiber Reinforced Polymer (FRP) Matrix Composite Bars used in Concrete Construction
  • ASTM D7750-12

    Test Method for:Cure Behavior of Thermosetting Resins by Dynamic Mechanical Procedures using an Encapsulated Specimen Rheometer
  • ASTM D7766_D7766M-11

    Practice for:Damage Resistance Testing of Sandwich Constructions
  • ASTM D7905_D7905M-14

    Test Method for:Determination of the Mode II Interlaminar Fracture Toughness of Unidirectional Fiber-Reinforced Polymer Matrix Composites
  • ASTM D7913_D7913M-14

    Test Method for:Bond Strength of Fiber-Reinforced Polymer Matrix Composite Bars to Concrete by Pullout Testing
  • ASTM D7914_D7914M-14

    Test Method for:Strength of Fiber Reinforced Polymer (FRP) Bent Bars in Bend Locations
  • ASTM D7956_D7956M-14

    Practice for:Compressive Testing of Thin Damaged Laminates Using a Sandwich Long Beam Fixture Specimen
  • ASTM E0285-08R15

    Test Method for:Oxyacetylene Ablation Testing of Thermal Insulation Materials
  • ASTM E0295-82R14

    Test Method for:Measured Speed of Oil Diffusion Pumps
  • ASTM E0296-70R15

    Practice for:Ionization Gage Application to Space Simulators
  • ASTM E0307-72R14

    Test Method for:Normal Spectral Emittance at Elevated Temperatures
  • ASTM E0341-08R15

    Practice for:Measuring Plasma Arc Gas Enthalpy by Energy Balance
  • ASTM E0349-06R14

    Terminology Relating to:Space Simulation
  • ASTM E0377-08R15

    Practice for:Internal Temperature Measurements in Low-Conductivity Materials
  • ASTM E0408-13

    Test Methods for:Total Normal Emittance of Surfaces Using Inspection-Meter Techniques
  • ASTM E0422-05R11

    Test Method for:Measuring Heat Flux Using a Water-Cooled Calorimeter
  • ASTM E0423-71R14

    Test Method for:Normal Spectral Emittance at Elevated Temperatures of Nonconducting Specimens
  • ASTM E0434-10R15

    Test Method for:Calorimetric Determination of Hemispherical Emittance and the Ratio of Solar Absorptance to Hemispherical Emittance Using Solar Simulation
  • ASTM E0457-08R15

    Test Method for:Measuring Heat-Transfer Rate Using a Thermal Capacitance (Slug) Calorimeter
  • ASTM E0458-08R15

    Test Method for:Heat of Ablation
  • ASTM E0459-05R11

    Test Method for:Measuring Heat Transfer Rate Using a Thin-Skin Calorimeter
  • ASTM E0471-96R11

    Test Method for:Obtaining Char Density Profile of Ablative Materials by Machining and Weighing
  • ASTM E0490-00AR14

    Standard:Solar Constant and Zero Air Mass Solar Spectral Irradiance Tables
  • ASTM E0491-73R15

    Practice for:Solar Simulation for Thermal Balance Testing of Spacecraft
  • ASTM E0511-07R15

    Test Method for:Measuring Heat Flux Using a Copper-Constantan Circular Foil, Heat-Flux Transducer
  • ASTM E0512-94R15

    Practice for:Combined, Simulated Space Environment Testing of Thermal Control Materials with Electromagnetic and Particulate Radiation
  • ASTM E0595-15

    Test Method for:Total Mass Loss and Collected Volatile Condensable Materials from Outgassing in a Vacuum Environment
  • ASTM E0598-08R15

    Test Method for:Measuring Extreme Heat-Transfer Rates from High-Energy Environments Using a Transient, Null-Point Calorimeter
  • ASTM E0637-05R11

    Test Method for:Calculation of Stagnation Enthalpy from Heat Transfer Theory and Experimental Measurements of Stagnation-Point Heat Transfer and Pressure
  • ASTM E0834-09R15

    Practice for:Determining Vacuum Chamber Gaseous Environment Using a Cold Finger
  • ASTM E1216-11

    Practice for:Sampling for Particulate Contamination by Tape Lift
  • ASTM E1234-12

    Practice for:Handling, Transporting, and Installing Nonvolatile Residue (NVR) Sample Plates Used in Environmentally Controlled Areas for Spacecraft
  • ASTM E1235-12

    Test Method for:Gravimetric Determination of Nonvolatile Residue (NVR) in Environmentally Controlled Areas for Spacecraft
  • ASTM E1309

    Guide for:Identification of Fiber-Reinforced Polymer-Matrix Composite Materials in Databases
  • ASTM E1434

    Guide for:Recording Mechanical Test Data of Fiber-Reinforced Composite Materials in Databases
  • ASTM E1471

    Guide for:Identification of Fibers, Fillers, and Core Materials in Computerized Material Property Databases
  • ASTM E1548-09

    Practice for:Preparation of Aerospace Contamination Control Plans
  • ASTM E1549_E1549M-13

    Specification for:ESD Controlled Garments Required in Cleanrooms and Controlled Environments for Spacecraft for Non-Hazardous and Hazardous Operations
  • ASTM E1559-09

    Test Method for:Contamination Outgassing Characteristics of Spacecraft Materials
  • ASTM E1560-11E01

    Test Method for:Gravimetric Determination of Nonvolatile Residue From Cleanroom Wipers
  • ASTM E1731-11

    Test Method for:Gravimetric Determination of Nonvolatile Residue from Cleanroom Gloves
  • ASTM E1997-15

    Practice for the:Selection of Spacecraft Materials
  • ASTM E2042_E2042M-09

    Practice for:Cleaning and Maintaining Controlled Areas and Clean Rooms
  • ASTM E2088-06R15

    Practice for:Selecting, Preparing, Exposing, and Analyzing Witness Surfaces for Measuring Particle Deposition in Cleanrooms and Associated Controlled Environments
  • ASTM E2089-15

    Practices for:Ground Laboratory Atomic Oxygen Interaction Evaluation of Materials for Space Applications
  • ASTM E2090-12

    Test Method for:Size-Differentiated Counting of Particles and Fibers Released from Cleanroom Wipers Using Optical and Scanning Electron Microscopy
  • ASTM E2217-12

    Practice for:Design and Construction of Aerospace Cleanrooms and Contamination Controlled Areas
  • ASTM E2311-04R09

    Practice for:QCM Measurement of Spacecraft Molecular Contamination in Space
  • ASTM E2312-11

    Practice for:Tests of Cleanroom Materials
  • ASTM E2352-04R10

    Practice for:Aerospace Cleanrooms and Associated Controlled Environments—Cleanroom Operations
  • ASTM E2683-09

    Test Method for:Measuring Heat Flux Using Flush-Mounted Insert Temperature-Gradient Gages
  • ASTM E2684-09

    Test Method for:Measuring Heat Flux Using Surface-Mounted One-Dimensional Flat Gages
  • ASTM E2900-12

    Practice for:Spacecraft Hardware Thermal Vacuum Bakeout
  • ASTM F0021-14

    Test Method for:Hydrophobic Surface Films by the Atomizer Test
  • ASTM F0022-13

    Test Method for:Hydrophobic Surface Films by the Water-Break Test
  • ASTM F0024-09R15

    Test Method for:Measuring and Counting Particulate Contamination on Surfaces
  • ASTM F0025_F0025M-09R15

    Test Method for:Sizing and Counting Airborne Particulate Contamination in Cleanrooms and Other Dust-Controlled Areas
  • ASTM F0050-12R15

    Practice for:Continuous Sizing and Counting of Airborne Particles in Dust-Controlled Areas and Clean Rooms Using Instruments Capable of Detecting Single Sub-Micrometre and Larger Particles
  • ASTM F0051_F0051M-00R14E01

    Test Method for:Sizing and Counting Particulate Contaminant In and On Clean Room Garments
  • ASTM F0091-06R11

    Practice for:Testing for Leaks in the Filters Associated With Laminar Flow Clean Rooms and Clean Work Stations by Use of a Condensation Nuclei Detector
  • ASTM F0302-09R15

    Practice for:Field Sampling of Aerospace Fluids in Containers
  • ASTM F0303-08

    Practices for:Sampling for Particles in Aerospace Fluids and Components
  • ASTM F0307-13

    Practice for:Sampling Pressurized Gas for Gas Analysis
  • ASTM F0309-04R10

    Practice for:Liquid Sampling of Noncryogenic Aerospace Propellants
  • ASTM F0310-07R12

    Practice for:Sampling Cryogenic Aerospace Fluids
  • ASTM F0311-08R13

    Practice for:Processing Aerospace Liquid Samples for Particulate Contamination Analysis Using Membrane Filters
  • ASTM F0312-08

    Test Methods for:Microscopical Sizing and Counting Particles from Aerospace Fluids on Membrane Filters
  • ASTM F0318

    Practice for:Sampling Airborne Particulate Contamination in Cleanrooms for Handling Aerospace Fluids
  • ASTM F0319-09R14

    Practice for:Polarized Light Detection of Flaws in Aerospace Transparency Heating Elements
  • ASTM F0320-10

    Test Method for:Hail Impact Resistance of Aerospace Transparent Enclosures
  • ASTM F0326-96R12

    Test Method for:Electronic Measurement for Hydrogen Embrittlement From Cadmium-Electroplating Processes
  • ASTM F0327-08R15

    Practice for:Sampling Gas Blow Down Systems and Components for Particulate Contamination by Automatic Particle Monitor Method
  • ASTM F0330-10

    Test Method for:Bird Impact Testing of Aerospace Transparent Enclosures
  • ASTM F0331-13

    Test Method for:Nonvolatile Residue of Solvent Extract from Aerospace Components (Using Flash Evaporator)
  • ASTM F0428-09R14

    Test Method for:Intensity of Scratches on Aerospace Glass Enclosures
  • ASTM F0482-09R14

    Practice for:Corrosion of Aircraft Metals by Total Immersion in Maintenance Chemicals
  • ASTM F0483-09R14

    Practice for:Total Immersion Corrosion Test for Aircraft Maintenance Chemicals
  • ASTM F0484-08R13

    Test Method for:Stress Crazing of Acrylic Plastics in Contact with Liquid or Semi-Liquid Compounds
  • ASTM F0485-08R13

    Practice for:Effects of Cleaners on Unpainted Aircraft Surfaces
  • ASTM F0502-08R13

    Test Method for:Effects of Cleaning and Chemical Maintenance Materials on Painted Aircraft Surfaces
  • ASTM F0519-13

    Test Method for:Mechanical Hydrogen Embrittlement Evaluation of Plating/Coating Processes and Service Environments
  • ASTM F0520-10

    Test Method for:Environmental Resistance of Aerospace Transparencies to Artificially Induced Exposures
  • ASTM F0521-83R10

    Test Methods for:Bond Integrity of Transparent Laminates
  • ASTM F0548-09R14

    Test Method for:Intensity of Scratches on Aerospace Transparent Plastics
  • ASTM F0733-09R14

    Practice for:Optical Distortion and Deviation of Transparent Parts Using the Double-Exposure Method
  • ASTM F0734-95R11

    Test Method for:Shear Strength of Fusion Bonded Polycarbonate Aerospace Glazing Material
  • ASTM F0735-11

    Test Method for:Abrasion Resistance of Transparent Plastics and Coatings Using the Oscillating Sand Method
  • ASTM F0736-95R11

    Test Method for:Impact Resistance of Monolithic Polycarbonate Sheet by Means of a Falling Weight
  • ASTM F0790-08R13

    Guide for:Testing Materials for Aerospace Plastic Transparent Enclosures
  • ASTM F0791-96R13

    Test Method for:Stress Crazing of Transparent Plastics
  • ASTM F0801-96R08

    Test Method for:Measuring Optical Angular Deviation of Transparent Parts
  • ASTM F0862-11

    Practice for:pH and Chloride-ion Concentration of Aerospace Hydraulic Fluids
  • ASTM F0942-02R13

    Guide for:Selection of Test Methods for Interlayer Materials for Aerospace Transparent Enclosures
  • ASTM F0945-12

    Test Method for:Stress-Corrosion of Titanium Alloys by Aircraft Engine Cleaning Materials
  • ASTM F1080-93R13

    Test Method for:Determining the Consistency of Viscous Liquids Using a Consistometer
  • ASTM F1104-02R13

    Test Method for:Preparing Aircraft Cleaning Compounds, Liquid Type, Water Base, for Storage Stability Testing
  • ASTM F1105-09R14

    Practice for:Preparing Aircraft Cleaning Compounds, Liquid-Type, Temperature-Sensitive, or Solvent-Based, for Storage Stability Testing
  • ASTM F1110-09R14

    Test Method for:Sandwich Corrosion Test
  • ASTM F1111-08BR13

    Test Method for:Corrosion of Low-Embrittling Cadmium Plate by Aircraft Maintenance Chemicals
  • ASTM F1113-87R11

    Test Method for:Electrochemical Measurement of Diffusible Hydrogen in Steels (Barnacle Electrode)
  • ASTM F1164-97R14

    Test Method for:Evaluation of Transparent Plastics Exposed to Accelerated Weathering Combined with Biaxial Stress
  • ASTM F1165-15

    Test Method for:Measuring Angular Displacement of Multiple Images in Transparent Parts
  • ASTM F1181-09R14

    Test Method for:Measuring Binocular Disparity in Transparent Parts
  • ASTM F1252-10

    Test Method for:Measuring Optical Reflectivity of Transparent Materials
  • ASTM F1316-90R13

    Test Method for:Measuring the Transmissivity of Transparent Parts
  • ASTM F1362-13

    Test Method for:Shear Strength and Shear Modulus of Aerospace Glazing Interlayer Materials
  • ASTM F1459-06R12

    Test Method for:Determination of the Susceptibility of Metallic Materials to Hydrogen Gas Embrittlement (HGE)
  • ASTM F1624-12

    Test Method for:Measurement of Hydrogen Embrittlement Threshold in Steel by the Incremental Step Loading Technique
  • ASTM F1645_F1645M-12

    Test Method for:Water Migration in Honeycomb Core Materials
  • ASTM F1863-10

    Test Method for:Measuring the Night Vision Goggle-Weighted Transmissivity of Transparent Parts
  • ASTM F1864-05R10

    Test Method for:Dust Erosion Resistance of Optical and Infrared Transparent Materials and Coatings
  • ASTM F2078-15

    Terminology Relating to:Hydrogen Embrittlement Testing
  • ASTM F2108-06R11

    Practice for:Inspection of Transparent Parts by Prism
  • ASTM F2109-01R11

    Test Method to:Determine Color Change and Staining Caused by Aircraft Maintenance Chemicals upon Aircraft Cabin Interior Hard Surfaces
  • ASTM F2111-01AR11

    Practice for:Measuring Intergranular Attack or End Grain Pitting on Metals Caused by Aircraft Chemical Processes
  • ASTM F2156-11

    Test Method for:Measuring Optical Distortion in Transparent Parts Using Grid Line Slope
  • ASTM F2429-15

    Terminology Relating to:Aerospace Transparent Materials and Enclosures
  • ASTM F2469-15

    Test Method for:Measuring Optical Angular Deviation of Transparent Parts Using the Double-Exposure Method