관심표준 등록 : 표준업데이트 시 알림을 받을 수 있습니다.
PDF : 직접 파일 다운로드 및 인쇄 (마이페이지 확인)
PRINT : 인쇄본 우편발송, 2~3일 소요(PDF파일 미제공)
분야 | 04.07 : 건축실 및 실링재; 소방재규정 |
---|---|
적용범위 | 1.1 This fire-test-response standard covers a procedure for measuring fire properties associated with flammable behavior of surface finishes used on noncombustible substrates (Note 1). In particular, these include surface finishes intended for use as surfacing materials and ceiling veneers including any adhesives used to fasten the veneers to ceilings, paints, and exposed treatment of insulating materials. Note 1: This test method was originally developed to closely follow the test procedure of IMO Resolution A.653(16) (1).2 ISO 5658-2 also describes similar test equipment. The test procedure used by IMO for regulation of surface finishes is IMO 2010 FTP Code Part 5 (2), which has replaced IMO Resolution A.653(16). 1.2 Tests performed according to this test method are intended to yield fire properties that, when appropriately interpreted, are potentially useful to select materials and surface treatments that will limit the rapid growth and spread of fire. 1.3 This test method requires a specific range of specimen radiant thermal exposure for measuring fire properties. 1.4 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.5 This standard is used to measure and describe the response of materials, products, or assemblies to heat and flame under controlled conditions, but does not by itself incorporate all factors required for fire hazard or fire risk assessment of the materials, products, or assemblies under actual fire conditions. 1.6 Fire testing is inherently hazardous. Adequate safeguards for personnel and property shall be employed in conducting these tests. 1.7 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. For specific hazard statements, see Section 7. 1.8 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. |
국제분류(ICS)코드 | 47.020.10 : 선체 및 구조 요소 |
페이지수 | 19 |
Edition | 19 |
No. | 표준번호 | 표준명 | 발행일 | 상태 |
---|---|---|---|---|
1 | ASTM E1317-19 | Standard Test Method for Flammability of Surface Finishes | 2019-04-15 | 표준 |
2 | ASTM E1317-19 REDLINE | Standard Test Method for Flammability of Surface Finishes | 2019-04-15 | 표준 |
3 | ASTM E1317-12 REDLINE | Standard Test Method for Flammability of Marine Surface Finishes | 2012-07-01 | 구판 |
4 | ASTM E1317-12 | Standard Test Method for Flammability of Marine Surface Finishes | 2012-07-01 | 구판 |
5 | ASTM E1317-08b | Standard Test Method for Flammability of Marine Surface Finishes | 2008-09-01 | 구판 |
6 | ASTM E1317-08a | Standard Test Method for Flammability of Marine Surface Finishes | 2008-04-01 | 구판 |
7 | ASTM E1317-08 | Standard Test Method for Flammability of Marine Surface Finishes | 2008-01-01 | 구판 |
8 | ASTM E1317-97a(2002) | Standard Test Method for Flammability of Marine Surface Finishes | 1997-06-10 | 구판 |
9 | ASTM E1317-97a | Standard Test Method for Flammability of Marine Surface Finishes | 1997-01-01 | 구판 |
관련상품이 존재하지 않습니다.
ASTM E1354-17 - Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter 상세보기
ASTM E662-19 - Standard Test Method for Specific Optical Density of Smoke Generated by Solid Materials 상세보기
ASTM D2863-19 - Standard Test Method for Measuring the Minimum Oxygen Concentration to Support Candle-Like Combustion of Plastics (Oxygen Index) 상세보기
KS F ISO 1182 - 건축 재료의 불연성 시험 방법 상세보기
ASTM E603-17 - Standard Guide for Room Fire Experiments 상세보기
IEC TS 63134:2020 - Active assisted living (AAL) use cases 상세보기
IEC 60034-5:2020 RLV - Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification 상세보기
KS B ISO TS 25740-1 - 에스컬레이터 및 무빙워크에 대한 안전요건 — 제1부: 세계공통 필수 안전요건(GESRs) 상세보기
KS B ISO TS 8100-21 - 승객 및 화물 운송용 엘리베이터 —제21부: 세계공통 필수안전요건(GESRs)을 충족하는 세계공통 안전 파라미터(GSPs) 상세보기
KS C IEC TS 62872 - 산업 시설과 스마트 그리드 사이의 산업 공정 측정, 제어 및 자동화 시스템 인터페이스 상세보기