관심표준 등록 : 표준업데이트 시 알림을 받을 수 있습니다.
PDF : 직접 파일 다운로드 및 인쇄 (마이페이지 확인)
PRINT : 인쇄본 우편발송, 2~3일 소요(PDF파일 미제공)
분야 | 01.03 : 철강-강판, 강대 및 강선 |
---|---|
적용범위 | 1.1 This specification2 covers hot- and cold-finished bars of stainless steel, including rounds, squares, and hexagons, and hot-rolled or extruded shapes such as angles, tees, and channels for use in boiler and pressure vessel construction.2 Note 1: There are standards covering high nickel, chromium, austenitic corrosion, and heat-resisting alloy materials. These standards are under the jurisdiction of ASTM Subcommittee B02.07 and may be found in Annual Book of ASTM Standards, Vol 02.04. 1.2 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard. 1.3 Unless the order specifies the applicable “M” specification designation, the material shall be furnished to the inch-pound units. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. |
국제분류(ICS)코드 | 77.140.30 : 압력용기용 강 |
페이지수 | 8 |
Edition | 20 |
No. | 표준번호 | 표준명 | 발행일 | 상태 |
---|---|---|---|---|
1 | ASTM A479/A479M-24 | Standard Specification for Stainless Steel Bars and Shapes for Use in Boilers and Other Pressure Vessels | 2024-05-01 | 표준 |
2 | ASTM A479/A479M-24 REDLINE | Standard Specification for Stainless Steel Bars and Shapes for Use in Boilers and Other Pressure Vessels | 2024-05-01 | 표준 |
3 | ASTM A479/A479M-23a REDLINE | Standard Specification for Stainless Steel Bars and Shapes for Use in Boilers and Other Pressure Vessels | 2023-05-15 | 구판 |
4 | ASTM A479/A479M-23a | Standard Specification for Stainless Steel Bars and Shapes for Use in Boilers and Other Pressure Vessels | 2023-05-15 | 구판 |
5 | ASTM A479/A479M-23 | Standard Specification for Stainless Steel Bars and Shapes for Use in Boilers and Other Pressure Vessels | 2023-03-01 | 구판 |
6 | ASTM A479/A479M-21 | Standard Specification for Stainless Steel Bars and Shapes for Use in Boilers and Other Pressure Vessels | 2021-11-01 | 구판 |
7 | ASTM A479/A479M-21 REDLINE | Standard Specification for Stainless Steel Bars and Shapes for Use in Boilers and Other Pressure Vessels | 2021-11-01 | 구판 |
8 | ASTM A479/A479M-20 | Standard Specification for Stainless Steel Bars and Shapes for Use in Boilers and Other Pressure Vessels | 2020-07-01 | 구판 |
9 | ASTM A479/A479M-20 REDLINE | Standard Specification for Stainless Steel Bars and Shapes for Use in Boilers and Other Pressure Vessels | 2020-07-01 | 구판 |
10 | ASTM A479/A479M-19 REDLINE | Standard Specification for Stainless Steel Bars and Shapes for Use in Boilers and Other Pressure Vessels | 2019-09-01 | 구판 |
11 | ASTM A479/A479M-19 | Standard Specification for Stainless Steel Bars and Shapes for Use in Boilers and Other Pressure Vessels | 2019-09-01 | 구판 |
12 | ASTM A479/A479M-18 | Standard Specification for Stainless Steel Bars and Shapes for Use in Boilers and Other Pressure Vessels | 2018-01-01 | 구판 |
13 | ASTM A479/A479M-18 REDLINE | Standard Specification for Stainless Steel Bars and Shapes for Use in Boilers and Other Pressure Vessels | 2018-01-01 | 구판 |
14 | ASTM A479/A479M-17 | Standard Specification for Stainless Steel Bars and Shapes for Use in Boilers and Other Pressure Vessels | 2017-03-15 | 구판 |
15 | ASTM A479/A479M-16a | Standard Specification for Stainless Steel Bars and Shapes for Use in Boilers and Other Pressure Vessels | 2016-05-01 | 구판 |
16 | ASTM A479/A479M-16 | Standard Specification for Stainless Steel Bars and Shapes for Use in Boilers and Other Pressure Vessels | 2016-01-01 | 구판 |
17 | ASTM A479/A479M-15 | Standard Specification for Stainless Steel Bars and Shapes for Use in Boilers and Other Pressure Vessels | 2015-07-15 | 구판 |
18 | ASTM A479/A479M-14 | Standard Specification for Stainless Steel Bars and Shapes for Use in Boilers and Other Pressure Vessels | 2014-05-01 | 구판 |
19 | ASTM A479/A479M-13b | Standard Specification for Stainless Steel Bars and Shapes for Use in Boilers and Other Pressure Vessels | 2013-11-01 | 구판 |
20 | ASTM A479/A479M-13a | Standard Specification for Stainless Steel Bars and Shapes for Use in Boilers and Other Pressure Vessels | 2013-05-01 | 구판 |
21 | ASTM A479/A479M-13 | Standard Specification for Stainless Steel Bars and Shapes for Use in Boilers and Other Pressure Vessels | 2013-04-01 | 구판 |
22 | ASTM A479/A479M-12 | Standard Specification for Stainless Steel Bars and Shapes for Use in Boilers and Other Pressure Vessels | 2012-11-01 | 구판 |
23 | ASTM A479/A479M-11 | Standard Specification for Stainless Steel Bars and Shapes for Use in Boilers and Other Pressure Vessels | 2011-05-01 | 구판 |
24 | ASTM A479/A479M-10a | Standard Specification for Stainless Steel Bars and Shapes for Use in Boilers and Other Pressure Vessels | 2010-05-01 | 구판 |
25 | ASTM A479/A479M-10 | Standard Specification for Stainless Steel Bars and Shapes for Use in Boilers and Other Pressure Vessels | 2010-04-01 | 구판 |
26 | ASTM A479/A479M-09 | Standard Specification for Stainless Steel Bars and Shapes for Use in Boilers and Other Pressure Vessels | 2009-10-01 | 구판 |
27 | ASTM A479/A479M-08 | Standard Specification for Stainless Steel Bars and Shapes for Use in Boilers and Other Pressure Vessels | 2008-10-01 | 구판 |
28 | ASTM A479/A479M-06a | Standard Specification for Stainless Steel Bars and Shapes for Use in Boilers and Other Pressure Vessels | 2006-06-15 | 구판 |
29 | ASTM A479/A479M-06 | Standard Specification for Stainless Steel Bars and Shapes for Use in Boilers and Other Pressure Vessels | 2006-03-15 | 구판 |
30 | ASTM A479/A479M-05a | Standard Specification for Stainless Steel Bars and Shapes for Use in Boilers and Other Pressure Vessels | 2005-09-01 | 구판 |
31 | ASTM A479/A479M-05 | Standard Specification for Stainless Steel Bars and Shapes for Use in Boilers and Other Pressure Vessels | 2005-03-01 | 구판 |
32 | ASTM A479/A479M-04 | Standard Specification for Stainless Steel Bars and Shapes for Use in Boilers and Other Pressure Vessels | 2004-02-01 | 구판 |
33 | ASTM A479/A479M-03 | Standard Specification for Stainless Steel Bars and Shapes for Use in Boilers and Other Pressure Vessels | 2003-04-10 | 구판 |
34 | ASTM A479/A479M-02a | Standard Specification for Stainless Steel Bars and Shapes for Use in Boilers and Other Pressure Vessels | 2002-12-10 | 구판 |
35 | ASTM A479/A479M-01 | Standard Specification for Stainless Steel Bars and Shapes for Use in Boilers and Other Pressure Vessels | 2002-03-10 | 구판 |
36 | ASTM A479/A479M-00 | Standard Specification for Stainless Steel Bars and Shapes for Use in Boilers and Other Pressure Vessels | 2002-03-10 | 구판 |
관련상품이 존재하지 않습니다.
ASTM A276/A276M-17 - Standard Specification for Stainless Steel Bars and Shapes 상세보기
ASTM F436/F436M-19 - Standard Specification for Hardened Steel Washers Inch and Metric Dimensions 상세보기
ASTM A194/A194M-20a - Standard Specification for Carbon Steel, Alloy Steel, and Stainless Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both 상세보기
ASTM A53/A53M-20 - Standard Specification for Pipe, Steel, Black and Hot-Dipped, Zinc-Coated, Welded and Seamless 상세보기
ASME STS-1 2016 Edition - Steel Stacks 상세보기
IEC TS 63134:2020 - Active assisted living (AAL) use cases 상세보기
IEC 60034-5:2020 RLV - Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification 상세보기
KS B ISO TS 25740-1 - 에스컬레이터 및 무빙워크에 대한 안전요건 — 제1부: 세계공통 필수 안전요건(GESRs) 상세보기
KS B ISO TS 8100-21 - 승객 및 화물 운송용 엘리베이터 —제21부: 세계공통 필수안전요건(GESRs)을 충족하는 세계공통 안전 파라미터(GSPs) 상세보기
KS C IEC TS 62872 - 산업 시설과 스마트 그리드 사이의 산업 공정 측정, 제어 및 자동화 시스템 인터페이스 상세보기