관심표준 등록 : 표준업데이트 시 알림을 받을 수 있습니다.
PDF : 직접 파일 다운로드 및 인쇄 (마이페이지 확인)
PRINT : 인쇄본 우편발송, 2~3일 소요(PDF파일 미제공)
분야 | 05.01 : 석유제품 및 윤활유 (Ⅰ) |
---|---|
적용범위 | 1.1?This test method covers the determination of the boiling range distribution of petroleum products. The test method is applicable to petroleum products and fractions having a final boiling point of 538?°C (1000?°F) or lower at atmospheric pressure as measured by this test method. This test method is limited to samples having a boiling range greater than 55.5?°C (100?°F), and having a vapor pressure sufficiently low to permit sampling at ambient temperature. Note 1:?Since a boiling range is the difference between two temperatures, only the constant of 1.8?°F/°C is used in the conversion of the temperature range from one system of units to another. 1.1.1?Procedure A (Sections 6 ? 14)?Allows a larger selection of columns and analysis conditions such as packed and capillary columns as well as a Thermal Conductivity Detector in addition to the Flame Ionization Detector. Analysis times range from 14?min to 60?min. 1.1.2?Procedure B (Sections 15 ? 23)?Is restricted to only 3 capillary columns and requires no sample dilution. In addition, Procedure B is used not only for the sample types described in Procedure A but also for the analysis of samples containing biodiesel mixtures B5, B10, and B20. The analysis time, when using Procedure B (Accelerated D2887), is reduced to about 8?min. 1.2?This test method is not to be used for the analysis of gasoline samples or gasoline components. These types of samples must be analyzed by Test Method D7096. 1.3?The values stated in SI units are to be regarded as standard. The values given in parentheses after SI units are provided for information only and are not considered standard. 1.4?This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.5?This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. |
국제분류(ICS)코드 | 75.080 : 석유제품 일반 |
페이지수 | 34 |
Edition | 22e1 |
No. | 표준번호 | 표준명 | 발행일 | 상태 |
---|---|---|---|---|
1 | ASTM D2887-23 | Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography | 2023-07-01 | 표준 |
2 | ASTM D2887-23 REDLINE | Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography | 2023-07-01 | 표준 |
3 | ASTM D2887-22 REDLINE | Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography | 2022-09-01 | 구판 |
4 | ASTM D2887-22 | Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography | 2022-09-01 | 구판 |
5 | ASTM D2887-22e1 | Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography | 2022-09-01 | 구판 |
6 | ASTM D2887-19a | Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography | 2019-12-01 | 구판 |
7 | ASTM D2887-19ae1 | Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography | 2019-12-01 | 구판 |
8 | ASTM D2887-19ae2 | Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography | 2019-12-01 | 구판 |
9 | ASTM D2887-19a REDLINE | Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography | 2019-12-01 | 구판 |
10 | ASTM D2887-19 | Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography | 2019-07-01 | 구판 |
11 | ASTM D2887-18 | Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography | 2018-06-01 | 구판 |
12 | ASTM D2887-18 REDLINE | Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography | 2018-06-01 | 구판 |
13 | ASTM D2887-16a | Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography | 2016-10-01 | 구판 |
14 | ASTM D2887-16 | Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography | 2016-04-01 | 구판 |
15 | ASTM D2887-15e1 | Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography | 2015-07-01 | 구판 |
16 | ASTM D2887-15 | Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography | 2015-07-01 | 구판 |
17 | ASTM D2887-14 | Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography | 2014-10-01 | 구판 |
18 | ASTM D2887-13 | Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography | 2013-05-01 | 구판 |
19 | ASTM D2887-12 | Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography | 2012-11-01 | 구판 |
20 | ASTM D2887-08 | Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography | 2008-12-01 | 구판 |
21 | ASTM D2887-06a | Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography | 2006-12-01 | 구판 |
22 | ASTM D2887-06 | Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography | 2006-08-01 | 구판 |
23 | ASTM D2887-04a | Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography | 2004-07-01 | 구판 |
24 | ASTM D2887-04 | Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography | 2004-05-01 | 구판 |
25 | ASTM D2887-03 | Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography | 2003-11-01 | 구판 |
26 | ASTM D2887-02 | Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography | 2002-11-10 | 구판 |
27 | ASTM D2887-01 | Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography | 2001-11-10 | 구판 |
28 | ASTM D2887-99 | Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography | 2001-11-10 | 구판 |
29 | ASTM D2887-01a | Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography | 2001-11-10 | 구판 |
관련상품이 존재하지 않습니다.
ASTM D4191-15 REDLINE - Standard Test Method for Sodium in Water by Atomic Absorption Spectrophotometry 상세보기
ASTM D2163-23e1 - Standard Test Method for Determination of Hydrocarbons in Liquefied Petroleum (LP) Gases and Propane/Propene Mixtures by Gas Chromatography 상세보기
ASTM D256-23e1 - Standard Test Methods for Determining the Izod Pendulum Impact Resistance of Plastics 상세보기
ASTM D5708-15(2020)e1 - Standard Test Methods for Determination of Nickel, Vanadium, and Iron in Crude Oils and Residual Fuels by Inductively Coupled Plasma (ICP) Atomic Emission Spectrometry 상세보기
ASTM D664-18e2 - Standard Test Method for Acid Number of Petroleum Products by Potentiometric Titration 상세보기
IEC TS 63134:2020 - Active assisted living (AAL) use cases 상세보기
IEC 60034-5:2020 RLV - Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification 상세보기
KS B ISO TS 25740-1 - 에스컬레이터 및 무빙워크에 대한 안전요건 — 제1부: 세계공통 필수 안전요건(GESRs) 상세보기
KS B ISO TS 8100-21 - 승객 및 화물 운송용 엘리베이터 —제21부: 세계공통 필수안전요건(GESRs)을 충족하는 세계공통 안전 파라미터(GSPs) 상세보기
KS C IEC TS 62872 - 산업 시설과 스마트 그리드 사이의 산업 공정 측정, 제어 및 자동화 시스템 인터페이스 상세보기