관심표준 등록 : 표준업데이트 시 알림을 받을 수 있습니다.
PDF : 직접 파일 다운로드 및 인쇄 (마이페이지 확인)
PRINT : 인쇄본 우편발송, 2~3일 소요(PDF파일 미제공)
분야 | 01.03 : 철강-강판, 강대 및 강선 |
---|---|
적용범위 | 1.1?This specification2 covers a group of general requirements that, unless otherwise specified in the purchase order or in an individual specification, shall apply to rolled steel plate, sheet, and strip, under each of the following specifications issued by ASTM: Specifications A240/A240M, A263, A264, A265, A666, A693, A793, and A895. 1.2?In the case of conflict between a requirement of a product specification and a requirement of this specification, the product specification shall prevail. In the case of conflict between a requirement of the product specification or a requirement of this specification and a more stringent requirement of the purchase order, the purchase order shall prevail. The purchase order requirements shall not take precedence if they, in any way, violate the requirements of the product specification or this specification; for example, by waiving a test requirement or by making a test requirement less stringent. 1.3?The values stated in either SI units or inch-pound units are to be regarded separately as standard. The SI units are shown in brackets, except that when A480M is specified, Annex A3 shall apply for the dimensional tolerances and not the bracketed SI values in Annex A2. The values stated in each system are not necessarily exact equivalents; therefore, to ensure conformance with the standard, each system shall be used independently of the other, and values from the two systems shall not be combined. 1.4?This specification and the applicable material specifications are expressed in both inch-pound and SI units. However, unless the order specifies the applicable “M” specification designation [SI units], the material shall be furnished in inch-pound units. 1.5?This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. |
국제분류(ICS)코드 | 77.140.50 : 보통 강제품 및 반제품 |
페이지수 | 26 |
Edition | 23b |
No. | 표준번호 | 표준명 | 발행일 | 상태 |
---|---|---|---|---|
1 | ASTM A480/A480M-24 | Standard Specification for General Requirements for Flat-Rolled Stainless and Heat-Resisting Steel Plate, Sheet, and Strip | 2024-05-15 | 표준 |
2 | ASTM A480/A480M-24 REDLINE | Standard Specification for General Requirements for Flat-Rolled Stainless and Heat-Resisting Steel Plate, Sheet, and Strip | 2024-05-15 | 표준 |
3 | ASTM A480/A480M-23b | Standard Specification for General Requirements for Flat-Rolled Stainless and Heat-Resisting Steel Plate, Sheet, and Strip | 2023-11-01 | 구판 |
4 | ASTM A480/A480M-23b REDLINE | Standard Specification for General Requirements for Flat-Rolled Stainless and Heat-Resisting Steel Plate, Sheet, and Strip | 2023-11-01 | 구판 |
5 | ASTM A480/A480M-23a | Standard Specification for General Requirements for Flat-Rolled Stainless and Heat-Resisting Steel Plate, Sheet, and Strip | 2023-09-01 | 구판 |
6 | ASTM A480/A480M-23 REDLINE | Standard Specification for General Requirements for Flat-Rolled Stainless and Heat-Resisting Steel Plate, Sheet, and Strip | 2023-03-01 | 구판 |
7 | ASTM A480/A480M-22a REDLINE | Standard Specification for General Requirements for Flat-Rolled Stainless and Heat-Resisting Steel Plate, Sheet, and Strip | 2022-09-01 | 구판 |
8 | ASTM A480/A480M-22a | Standard Specification for General Requirements for Flat-Rolled Stainless and Heat-Resisting Steel Plate, Sheet, and Strip | 2022-09-01 | 구판 |
9 | ASTM A480/A480M-22 REDLINE | Standard Specification for General Requirements for Flat-Rolled Stainless and Heat-Resisting Steel Plate, Sheet, and Strip | 2022-05-01 | 구판 |
10 | ASTM A480/A480M-22 | Standard Specification for General Requirements for Flat-Rolled Stainless and Heat-Resisting Steel Plate, Sheet, and Strip | 2022-05-01 | 구판 |
11 | ASTM A480/A480M-20a | Standard Specification for General Requirements for Flat-Rolled Stainless and Heat-Resisting Steel Plate, Sheet, and Strip | 2020-07-01 | 구판 |
12 | ASTM A480/A480M-20a REDLINE | Standard Specification for General Requirements for Flat-Rolled Stainless and Heat-Resisting Steel Plate, Sheet, and Strip | 2020-07-01 | 구판 |
13 | ASTM A480/A480M-20 REDLINE | Standard Specification for General Requirements for Flat-Rolled Stainless and Heat-Resisting Steel Plate, Sheet, and Strip | 2020-03-01 | 구판 |
14 | ASTM A480/A480M-20 | Standard Specification for General Requirements for Flat-Rolled Stainless and Heat-Resisting Steel Plate, Sheet, and Strip | 2020-03-01 | 구판 |
15 | ASTM A480/A480M-19a | Standard Specification for General Requirements for Flat-Rolled Stainless and Heat-Resisting Steel Plate, Sheet, and Strip | 2019-11-01 | 구판 |
16 | ASTM A480/A480M-19a REDLINE | Standard Specification for General Requirements for Flat-Rolled Stainless and Heat-Resisting Steel Plate, Sheet, and Strip | 2019-11-01 | 구판 |
17 | ASTM A480/A480M-19 REDLINE | Standard Specification for General Requirements for Flat-Rolled Stainless and Heat-Resisting Steel Plate, Sheet, and Strip | 2019-09-01 | 구판 |
18 | ASTM A480/A480M-19 | Standard Specification for General Requirements for Flat-Rolled Stainless and Heat-Resisting Steel Plate, Sheet, and Strip | 2019-09-01 | 구판 |
19 | ASTM A480/A480M-18a | Standard Specification for General Requirements for Flat-Rolled Stainless and Heat-Resisting Steel Plate, Sheet, and Strip | 2018-12-01 | 구판 |
20 | ASTM A480/A480M-18a REDLINE | Standard Specification for General Requirements for Flat-Rolled Stainless and Heat-Resisting Steel Plate, Sheet, and Strip | 2018-12-01 | 구판 |
21 | ASTM A480/A480M-18 | Standard Specification for General Requirements for Flat-Rolled Stainless and Heat-Resisting Steel Plate, Sheet, and Strip | 2018-09-01 | 구판 |
22 | ASTM A480/A480M-17 | Standard Specification for General Requirements for Flat-Rolled Stainless and Heat-Resisting Steel Plate, Sheet, and Strip | 2017-11-01 | 구판 |
23 | ASTM A480/A480M-16b | Standard Specification for General Requirements for Flat-Rolled Stainless and Heat-Resisting Steel Plate, Sheet, and Strip | 2016-12-01 | 구판 |
24 | ASTM A480/A480M-16a | Standard Specification for General Requirements for Flat-Rolled Stainless and Heat-Resisting Steel Plate, Sheet, and Strip | 2016-04-15 | 구판 |
25 | ASTM A480/A480M-16 | Standard Specification for General Requirements for Flat-Rolled Stainless and Heat-Resisting Steel Plate, Sheet, and Strip | 2016-02-01 | 구판 |
26 | ASTM A480/A480M-15 | Standard Specification for General Requirements for Flat-Rolled Stainless and Heat-Resisting Steel Plate, Sheet, and Strip | 2015-09-01 | 구판 |
27 | ASTM A480/A480M-14b | Standard Specification for General Requirements for Flat-Rolled Stainless and Heat-Resisting Steel Plate, Sheet, and Strip | 2014-10-01 | 구판 |
28 | ASTM A480/A480M-14a | Standard Specification for General Requirements for Flat-Rolled Stainless and Heat-Resisting Steel Plate, Sheet, and Strip | 2014-05-01 | 구판 |
29 | ASTM A480/A480M-14 | Standard Specification for General Requirements for Flat-Rolled Stainless and Heat-Resisting Steel Plate, Sheet, and Strip | 2014-03-01 | 구판 |
30 | ASTM A480/A480M-13b | Standard Specification for General Requirements for Flat-Rolled Stainless and Heat-Resisting Steel Plate, Sheet, and Strip | 2013-11-01 | 구판 |
31 | ASTM A480/A480M-13a | Standard Specification for General Requirements for Flat-Rolled Stainless and Heat-Resisting Steel Plate, Sheet, and Strip | 2013-10-01 | 구판 |
32 | ASTM A480/A480M-13 | Standard Specification for General Requirements for Flat-Rolled Stainless and Heat-Resisting Steel Plate, Sheet, and Strip | 2013-05-01 | 구판 |
33 | ASTM A480/A480M-12 | Standard Specification for General Requirements for Flat-Rolled Stainless and Heat-Resisting Steel Plate, Sheet, and Strip | 2012-04-01 | 구판 |
34 | ASTM A480/A480M-11b | Standard Specification for General Requirements for Flat-Rolled Stainless and Heat-Resisting Steel Plate, Sheet, and Strip | 2011-12-01 | 구판 |
35 | ASTM A480/A480M-11a | Standard Specification for General Requirements for Flat-Rolled Stainless and Heat-Resisting Steel Plate, Sheet, and Strip | 2011-04-01 | 구판 |
36 | ASTM A480/A480M-11 | Standard Specification for General Requirements for Flat-Rolled Stainless and Heat-Resisting Steel Plate, Sheet, and Strip | 2011-02-15 | 구판 |
37 | ASTM A480/A480M-10a | Standard Specification for General Requirements for Flat-Rolled Stainless and Heat-Resisting Steel Plate, Sheet, and Strip | 2010-12-01 | 구판 |
38 | ASTM A480/A480M-10 | Standard Specification for General Requirements for Flat-Rolled Stainless and Heat-Resisting Steel Plate, Sheet, and Strip | 2010-04-01 | 구판 |
39 | ASTM A480/A480M-09b | Standard Specification for General Requirements for Flat-Rolled Stainless and Heat-Resisting Steel Plate, Sheet, and Strip | 2009-11-15 | 구판 |
40 | ASTM A480/A480M-09a | Standard Specification for General Requirements for Flat-Rolled Stainless and Heat-Resisting Steel Plate, Sheet, and Strip | 2009-10-01 | 구판 |
41 | ASTM A480/A480M-09 | Standard Specification for General Requirements for Flat-Rolled Stainless and Heat-Resisting Steel Plate, Sheet, and Strip | 2009-04-01 | 구판 |
42 | ASTM A480/A480M-08b | Standard Specification for General Requirements for Flat-Rolled Stainless and Heat-Resisting Steel Plate, Sheet, and Strip | 2008-10-01 | 구판 |
43 | ASTM A480/A480M-08a | Standard Specification for General Requirements for Flat-Rolled Stainless and Heat-Resisting Steel Plate, Sheet, and Strip | 2008-05-15 | 구판 |
44 | ASTM A480/A480M-08 | Standard Specification for General Requirements for Flat-Rolled Stainless and Heat-Resisting Steel Plate, Sheet, and Strip | 2008-04-01 | 구판 |
45 | ASTM A480/A480M-06b | Standard Specification for General Requirements for Flat-Rolled Stainless and Heat-Resisting Steel Plate, Sheet, and Strip | 2006-09-01 | 구판 |
46 | ASTM A480/A480M-06a | Standard Specification for General Requirements for Flat-Rolled Stainless and Heat-Resisting Steel Plate, Sheet, and Strip | 2006-06-15 | 구판 |
47 | ASTM A480/A480M-06 | Standard Specification for General Requirements for Flat-Rolled Stainless and Heat-Resisting Steel Plate, Sheet, and Strip | 2006-03-15 | 구판 |
48 | ASTM A480/A480M-05 | Standard Specification for General Requirements for Flat-Rolled Stainless and Heat-Resisting Steel Plate, Sheet, and Strip | 2005-09-15 | 구판 |
49 | ASTM A480/A480M-04a | Standard Specification for General Requirements for Flat-Rolled Stainless and Heat-Resisting Steel Plate, Sheet, and Strip | 2004-09-01 | 구판 |
50 | ASTM A480/A480M-04 | Standard Specification for General Requirements for Flat-Rolled Stainless and Heat-Resisting Steel Plate, Sheet, and Strip | 2004-03-01 | 구판 |
51 | ASTM A480/A480M-03c | Standard Specification for General Requirements for Flat-Rolled Stainless and Heat-Resisting Steel Plate, Sheet, and Strip | 2003-10-01 | 구판 |
52 | ASTM A480/A480M-03b | Standard Specification for General Requirements for Flat-Rolled Stainless and Heat-Resisting Steel Plate, Sheet, and Strip | 2003-05-10 | 구판 |
53 | ASTM A480/A480M-03a | Standard Specification for General Requirements for Flat-Rolled Stainless and Heat-Resisting Steel Plate, Sheet, and Strip | 2003-04-10 | 구판 |
54 | ASTM A480/A480M-03 | Standard Specification for General Requirements for Flat-Rolled Stainless and Heat-Resisting Steel Plate, Sheet, and Strip | 2003-02-10 | 구판 |
55 | ASTM A480/A480M-02 | Standard Specification for General Requirements for Flat-Rolled Stainless and Heat-Resisting Steel Plate, Sheet, and Strip | 2001-12-10 | 구판 |
56 | ASTM A480/A480M-00 | Standard Specification for General Requirements for Flat-Rolled Stainless and Heat-Resisting Steel Plate, Sheet, and Strip | 2001-12-10 | 구판 |
57 | ASTM A480/A480M-01b | Standard Specification for General Requirements for Flat-Rolled Stainless and Heat-Resisting Steel Plate, Sheet, and Strip | 2001-12-10 | 구판 |
58 | ASTM A480/A480M-01a | Standard Specification for General Requirements for Flat-Rolled Stainless and Heat-Resisting Steel Plate, Sheet, and Strip | 2001-12-10 | 구판 |
59 | ASTM A480/A480M-01 | Standard Specification for General Requirements for Flat-Rolled Stainless and Heat-Resisting Steel Plate, Sheet, and Strip | 2001-12-10 | 구판 |
60 | ASTM A480/A480M-99b | Standard Specification for General Requirements for Flat-Rolled Stainless and Heat-Resisting Steel Plate, Sheet, and Strip | 2001-12-10 | 구판 |
관련상품이 존재하지 않습니다.
KS D 3576 - 배관용 스테인리스 강관 상세보기
KS D 3536(2020 확인) - 기계구조용 스테인리스강 강관 상세보기
ASTM A269/A269M-24 - Standard Specification for Seamless and Welded Austenitic Stainless Steel Tubing for General Service 상세보기
ASTM A240/A240M-23a - Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications 상세보기
ASTM A213/A213M-23 - Standard Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger Tubes 상세보기
IEC TS 63134:2020 - Active assisted living (AAL) use cases 상세보기
IEC 60034-5:2020 RLV - Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification 상세보기
KS B ISO TS 25740-1 - 에스컬레이터 및 무빙워크에 대한 안전요건 — 제1부: 세계공통 필수 안전요건(GESRs) 상세보기
KS B ISO TS 8100-21 - 승객 및 화물 운송용 엘리베이터 —제21부: 세계공통 필수안전요건(GESRs)을 충족하는 세계공통 안전 파라미터(GSPs) 상세보기
KS C IEC TS 62872 - 산업 시설과 스마트 그리드 사이의 산업 공정 측정, 제어 및 자동화 시스템 인터페이스 상세보기