관심표준 등록 : 표준업데이트 시 알림을 받을 수 있습니다.
PDF : 직접 파일 다운로드 및 인쇄 (마이페이지 확인)
PRINT : 인쇄본 우편발송, 2~3일 소요(PDF파일 미제공)
표준
판매
Power installations exceeding 1 kV AC and 1,5 kV DC - Part 2: DC
| 분야 | TC 99 : Insulation co-ordination and system engineering of high voltage electrical power installations above 1,0 kV AC and 1,5 kV DC |
|---|---|
| 적용범위 | IEC 61936-2:2023 provides, in a convenient form, requirements for the design and the erection of DC installations in systems with nominal voltages above 1,5 kV DC, so as to provide safety and proper functioning for the use intended. For the purpose of interpreting this document, a DC installation is considered to be one of the following: a) A converter station or DC switching station; b) one (or more) DC generating or storage unit(s), such as solar farms or battery storage units, located on a single site, the DC installation includes DC equipment and cables with all associated power electronics, controlgear, switchgear and all electrical auxiliary systems. Connections between DC generating or storage units located on different sites are excluded; c) DC installation erected on offshore facilities for the purpose of generation, transmission, distribution and/or storage of electricity; or d) DC transition station (between overhead lines and underground cable or between different sections of underground cables). This International Standard does not apply to the design and erection of any of the following: - overhead and underground lines between separate installations; - electric railways; - mining equipment and installations; i- installations on ships according to IEC 60092 series and offshore units according to IEC 61892 series, which are used in the offshore petroleum industry for drilling, processing and storage purposes; - electrostatic equipment (e.g. electrostatic precipitators, spray-painting units); - test sites; - medical equipment, e.g. medical X-ray equipment; - valve hall or converter hall. This document does not apply to the requirements for carrying out live working on electrical installations. This document does not apply to the design of factory-built, type-tested thyristor valves, VSC valves and switchgear for which separate IEC standards exist. This first edition cancels and replaces the IEC TS 61936-2 published in 2015. This edition constitutes a technical revision. See the foreword of this edition for the list of significant technical changes with respect to the previous edition. |
| 국제분류(ICS)코드 |
29.020 : 전기 공학 일반
29.080.01 : 전기 절연 일반 |
| 페이지수 | 102 |
| Edition | 1.0 |
| No. | 표준번호 | 표준명 | 발행일 | 상태 |
|---|---|---|---|---|
| 1 | IEC 61936-2:2023 | Power installations exceeding 1 kV AC and 1,5 kV DC - Part 2: DC | 2023-09-26 | 표준 |
| 2 | IEC TS 61936-2:2015 | Power installations exceeding 1 kV a.c. and 1,5 kV d.c. - Part 2: d.c. | 2015-03-05 | 폐지(대체) |
IEC TS 61936-2:2015 - Power installations exceeding 1 kV a.c. and 1,5 kV d.c. - Part 2: d.c. 상세보기
IEC 61936-1:2021 - Power installations exceeding 1 kV AC and 1,5 kV DC - Part 1: AC 상세보기
IEC 61936-1:2021 CMV - Power installations exceeding 1 kV AC and 1,5 kV DC - Part 1: AC 상세보기
IEC TS 61936-0:2023 - Power installations exceeding 1 kV AC and 1,5 kV DC - Part 0: Principles to be observed in the design and erection of high voltage installations - Safety of high voltage installations 상세보기
BS EN 280-1:2022 - Mobile elevating work platforms. Design calculations. Stability criteria. Construction. Safety. Examinations and tests. 상세보기
BS EN 280-2:2022 - Mobile elevating work platforms. Additional safety requirements for load lifting appliances on the extending lifting structure and work platform. 상세보기
ASME BPVC.VIII.1-2023 Section VIII, Rules for Construction of Pressure Vessels, Division 1 상세보기
ASME B31.3-2022 - Process Piping 상세보기
ASME B31.1-2022 - Power Piping 상세보기
IEC TS 63134:2020 - Active assisted living (AAL) use cases 상세보기
IEC 60034-5:2020 RLV - Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification 상세보기
KS B ISO TS 25740-1 - 에스컬레이터 및 무빙워크에 대한 안전요건 — 제1부: 세계공통 필수 안전요건(GESRs) 상세보기
KS B ISO TS 8100-21 - 승객 및 화물 운송용 엘리베이터 —제21부: 세계공통 필수안전요건(GESRs)을 충족하는 세계공통 안전 파라미터(GSPs) 상세보기
KS C IEC TS 62872 - 산업 시설과 스마트 그리드 사이의 산업 공정 측정, 제어 및 자동화 시스템 인터페이스 상세보기
KS표준
핸드북
