관심표준 등록 : 표준업데이트 시 알림을 받을 수 있습니다.
PDF : 직접 파일 다운로드 및 인쇄 (마이페이지 확인)
PRINT : 인쇄본 우편발송, 2~3일 소요(PDF파일 미제공)
표준
판매
Hydraulic fluid power — Fatigue pressure testing of metal pressure-containing envelopes — Part 1: Test method
| 분야 | ISO/TC 131/SC 8 : Product testing |
|---|---|
| 적용범위 | ISO 10771-1:2015 specifies a method of fatigue testing the pressure-containing envelopes of components used in hydraulic fluid power systems under sustained steady cyclic internal pressure loads. This part of ISO 10771 is only applicable to component pressure-containing envelopes that - are manufactured from metals, - are operated at temperatures that exclude creep and low-temperature embrittlement, - are only subjected to pressure-induced stresses, - are not subjected to loss of strength due to corrosion or other chemical action, and - might include gaskets, seals, and other non-metallic components; however, these are not considered part of the pressure-containing envelope being tested (see 5.7). ISO 10771-1:2015 does not apply to piping as defined in ISO 4413 (i.e. connectors, hose, tubing, pipe). See ISO 6803 and ISO 6605 for methods of fatigue testing of piping devices. ISO 10771-1:2015 establishes a general test method that is applicable for many hydraulic fluid power components, but additional requirements or more specific methods that can be required for particular components are contained in the annexes or other standards. Test pressure is to be determined by the user. See ISO/TR 10771‑2 for a possible rating method. |
| 국제분류(ICS)코드 | 23.100.99 : 기타 유압 시스템 부품 |
| 페이지수 | 14 |
| Edition | 2 |
| No. | 표준번호 | 표준명 | 발행일 | 상태 |
|---|---|---|---|---|
| 1 | ISO 10771-1:2015 | Hydraulic fluid power — Fatigue pressure testing of metal pressure-containing envelopes — Part 1: Test method | 2015-07-21 | 표준 |
| 2 | ISO 10771-1:2002 | Hydraulic fluid power — Fatigue pressure testing of metal pressure-containing envelopes — Part 1: Test method | 2002-07-18 | 구판 |
ISO/TR 10771-2:2008 - Hydraulic fluid power — Fatigue pressure testing of metal pressure-containing envelopes — Part 2: Rating methods 상세보기
JIS B 1701-1:2012 - Cylindrical gears for general and heavy engineering -- Part 1: Standard basic rack tooth profile 상세보기
ISO 10770-2:2012 - Hydraulic fluid power — Electrically modulated hydraulic control valves — Part 2: Test methods for three-port directional flow-control valves 상세보기
ISO 10770-1:2009 - Hydraulic fluid power — Electrically modulated hydraulic control valves — Part 1: Test methods for four-port directional flow-control valves 상세보기
ISO/TR 10771-2:2008 - Hydraulic fluid power — Fatigue pressure testing of metal pressure-containing envelopes — Part 2: Rating methods 상세보기
ISO 3601-2:2016 - Fluid power systems — O-rings — Part 2: Housing dimensions for general applications 상세보기
IEC TS 63134:2020 - Active assisted living (AAL) use cases 상세보기
IEC 60034-5:2020 RLV - Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification 상세보기
KS B ISO TS 25740-1 - 에스컬레이터 및 무빙워크에 대한 안전요건 — 제1부: 세계공통 필수 안전요건(GESRs) 상세보기
KS B ISO TS 8100-21 - 승객 및 화물 운송용 엘리베이터 —제21부: 세계공통 필수안전요건(GESRs)을 충족하는 세계공통 안전 파라미터(GSPs) 상세보기
KS C IEC TS 62872 - 산업 시설과 스마트 그리드 사이의 산업 공정 측정, 제어 및 자동화 시스템 인터페이스 상세보기
KS표준
핸드북
