관심표준 등록 : 표준업데이트 시 알림을 받을 수 있습니다.
PDF : 직접 파일 다운로드 및 인쇄 (마이페이지 확인)
PRINT : 인쇄본 우편발송, 2~3일 소요(PDF파일 미제공)
분야 | ISO/TC 67/SC 7 : Offshore structures |
---|---|
적용범위 | ISO 19905-3 specifies requirements and gives guidance for the site-specific assessment of mobile floating units for use in the petroleum and natural gas industries. It addresses the installed phase, at a specific site, of manned non-evacuated, manned evacuated and unmanned mobile floating units. ISO 19905-3 addresses mobile floating units that are monohull (e.g. ship-shaped vessels or barges); column-stabilized, commonly referred to as semi-submersibles; or other hull forms (e.g. cylindrical/conical shaped). It is not applicable to tension leg platforms. Stationkeeping can be provided by a mooring system, a thruster assisted mooring system, or dynamic positioning. The function of the unit can be broad, including drilling, floatel, tender assist, etc. In situations where hydrocarbons are being produced, there can be additional requirements. The requirements of ISO 19905-3 apply to the hull and stationkeeping system for all types of mobile units. The activity specific operating guideline document requirements can be modified to be appropriate to the situation being assessed. ISO 19905-3 does not address all site considerations, and certain specific locations can require additional assessment. ISO 19905-3 is applicable only to mobile floating units that are structurally sound and adequately maintained, which is normally demonstrated through holding a valid RCS classification certificate. ISO 19905-3 does not address design, transportation to and from site, or installation and removal from site. ISO 19905-3 sets out the requirements for site-specific assessments, but generally relies on other documents to supply the details of how the assessments are to be undertaken. In general: - ISO 19901‑7 is referenced for the assessment of the stationkeeping system; - ISO 19904‑1 is referenced to determine the metocean actions on the unit; - ISO 19906 is referenced for arctic and cold regions; - the hull structure and airgap are assessed by use of a comparison between the site-specific metocean conditions and its design conditions, as set out in the RCS approved operations manual; - ISO 13624‑1 and ISO/TR 13624‑2[1] are referenced for the assessment of the marine drilling riser of mobile floating drilling units. Equivalent alternative methodologies can be used; - IMCA M 220[5] is referenced for developing an activity specific operating guidelines. Agreed alternative methodologies can be used. NOTE 1 The scope of ISO 19904‑1 specifically states that its requirements do not apply to mobile units, but the methodologies given for assessing metocean actions can be used. NOTE 2 RCS rules and the IMO MODU code[4] provide guidance for design and general operation of mobile floating units. |
국제분류(ICS)코드 | 75.180.10 : 탐사 및 채취 장비 |
페이지수 | 21 |
Edition | 1 |
No. | 표준번호 | 표준명 | 발행일 | 상태 |
---|---|---|---|---|
1 | ISO 19905-3:2021 | Petroleum and natural gas industries — Site-specific assessment of mobile offshore units — Part 3: Floating units | 2021-03-03 | 표준 |
2 | CSA ISO 19905-3:20 | Petroleum and natural gas industries — Site-specific assessment of mobile offshore units — Part 3: Floating unit (Adopted ISO 19905-3:2017, first edition, 2017-10) | 2020-01-01 | 표준 |
3 | ISO 19905-3:2017 | Petroleum and natural gas industries — Site-specific assessment of mobile offshore units — Part 3: Floating unit | 2017-10-11 | 구판 |
ISO 19905-1:2023/DAmd 1 - Oil and gas industries including lower carbon energy — Site-specific assessment of mobile offshore units — Part 1: Jack-ups: elevated at a site — Amendment 1 상세보기
ISO/TR 19905-2:2012 - Petroleum and natural gas industries — Site-specific assessment of mobile offshore units — Part 2: Jack-ups commentary and detailed sample calculation 상세보기
CSA ISO 19905-3:20 - Petroleum and natural gas industries — Site-specific assessment of mobile offshore units — Part 3: Floating unit (Adopted ISO 19905-3:2017, first edition, 2017-10) 상세보기
ISO 19905-3:2021 - Petroleum and natural gas industries — Site-specific assessment of mobile offshore units — Part 3: Floating units 상세보기
ISO 19905-1:2023 - Oil and gas industries including lower carbon energy — Site-specific assessment of mobile offshore units — Part 1: Jack-ups: elevated at a site 상세보기
함께 구입한 상품이 존재하지 않습니다.
IEC TS 63134:2020 - Active assisted living (AAL) use cases 상세보기
IEC 60034-5:2020 RLV - Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification 상세보기
KS B ISO TS 25740-1 - 에스컬레이터 및 무빙워크에 대한 안전요건 — 제1부: 세계공통 필수 안전요건(GESRs) 상세보기
KS B ISO TS 8100-21 - 승객 및 화물 운송용 엘리베이터 —제21부: 세계공통 필수안전요건(GESRs)을 충족하는 세계공통 안전 파라미터(GSPs) 상세보기
KS C IEC TS 62872 - 산업 시설과 스마트 그리드 사이의 산업 공정 측정, 제어 및 자동화 시스템 인터페이스 상세보기