관심표준 등록 : 표준업데이트 시 알림을 받을 수 있습니다.
PDF : 직접 파일 다운로드 및 인쇄 (마이페이지 확인)
PRINT : 인쇄본 우편발송, 2~3일 소요(PDF파일 미제공)
구판
판매
Determination of the characteristic limits (decision threshold, detection limit and limits of the coverage interval) for measurements of ionizing radiation — Fundamentals and application — Part 4: Guidelines to applications
| 분야 | ISO/TC 85/SC 2 : Radiological protection |
|---|---|
| 적용범위 | This document specifies a procedure, in the field of ionizing radiation metrology, for the calculation of the "decision threshold", the "detection limit" and the "limits of the coverage interval" for a non‑negative ionizing radiation measurand when counting measurements with preselection of time or counts are carried out. The measurand results from a gross count rate and a background count rate as well as from further quantities on the basis of a model of the evaluation. In particular, the measurand can be the net count rate as the difference of the gross count rate and the background count rate, or the net activity of a sample. It can also be influenced by calibration of the measuring system, by sample treatment and by other factors. ISO 11929 has been divided into four parts covering elementary applications in ISO 11929-1, advanced applications on the basis of the ISO/IEC Guide 98-3:2008/Suppl.1 in ISO 11929-2, applications to unfolding methods in ISO 11929-3, and guidance to the application in ISO 11929-4. ISO 11929-1 covers basic applications of counting measurements frequently used in the field of ionizing radiation metrology. It is restricted to applications for which the uncertainties can be evaluated on the basis of the ISO/IEC Guide 98-3 (JCGM 2008). In ISO 11929-1:2019, Annex A the special case of repeated counting measurements with random influences and in ISO 11929-1:2019, Annex B, measurements with linear analogous ratemeters are covered. ISO 11929-2 extends ISO 11929-1 to the evaluation of measurement uncertainties according to the ISO/IEC Guide 98-3:2008/Suppl.1. ISO 11929-2 also presents some explanatory notes regarding general aspects of counting measurements and Bayesian statistics in measurements. ISO 11929-3 deals with the evaluation of measurements using unfolding methods and counting spectrometric multi-channel measurements if evaluated by unfolding methods, in particular, alpha- and gamma-spectrometric measurements. Further, it provides some advice how to deal with correlations and covariances. ISO 11929-4 gives guidance to the application of ISO 11929 (all parts), summarizing shortly the general procedure and then presenting a wide range of numerical examples. The examples cover elementary applications according to ISO 11929-1 and ISO 11929-2. The ISO 11929 (all parts) also applies analogously to other measurements of any kind if a similar model of the evaluation is involved. Further practical examples can be found in other International Standards, for example, see References [1 to 20]. |
| 국제분류(ICS)코드 | 17.240 : 방사능 측정 |
| 페이지수 | 97 |
| Edition | 2 |
| No. | 표준번호 | 표준명 | 발행일 | 상태 |
|---|---|---|---|---|
| 1 | ISO 11929-4:2022 | Determination of the characteristic limits (decision threshold, detection limit and limits of the coverage interval) for measurements of ionizing radiation — Fundamentals and application — Part 4: Guidelines to applications | 2022-07-18 | 표준 |
| 2 | ISO 11929-4:2020 | Determination of the characteristic limits (decision threshold, detection limit and limits of the coverage interval) for measurements of ionizing radiation — Fundamentals and application — Part 4: Guidelines to applications | 2020-09-15 | 구판 |
| 3 | ISO 11929-4:2001 | Determination of the detection limit and decision threshold for ionizing radiation measurements — Part 4: Fundamentals and application to measurements by use of linear-scale analogue ratemeters, without the influence of sample treatment | 2001-06-21 | 구판 |
ISO/DIS 11929-5 - Determination of the detection limit and decision threshold for ionizing radiation measurements — Part 5: Fundamentals and applications to counting measurements on filters during accumulation of radioactive material 상세보기
ISO 11929-5:2005 - Determination of the detection limit and decision threshold for ionizing radiation measurements — Part 5: Fundamentals and applications to counting measurements on filters during accumulation of radioactive material 상세보기
ISO 11929-6:2005 - Determination of the detection limit and decision threshold for ionizing radiation measurements — Part 6: Fundamentals and applications to measurements by use of transient mode 상세보기
ISO 11929-7:2005 - Determination of the detection limit and decision threshold for ionizing radiation measurements — Part 7: Fundamentals and general applications 상세보기
ISO 11929-8:2005 - Determination of the detection limit and decision threshold for ionizing radiation measurements — Part 8: Fundamentals and application to unfolding of spectrometric measurements without the influence of sample treatment 상세보기
ISO 11929-1:2019 - Determination of the characteristic limits (decision threshold, detection limit and limits of the coverage interval) for measurements of ionizing radiation — Fundamentals and application — Part 1: Elementary applications 상세보기
ISO 11929-2:2019 - Determination of the characteristic limits (decision threshold, detection limit and limits of the coverage interval) for measurements of ionizing radiation — Fundamentals and application — Part 2: Advanced applications 상세보기
ISO 11929-3:2019 - Determination of the characteristic limits (decision threshold, detection limit and limits of the coverage interval) for measurements of ionizing radiation — Fundamentals and application — Part 3: Applications to unfolding methods 상세보기
IEC 61303:1994 - Medical electrical equipment - Radionuclide calibrators - Particular methods for describing performance 상세보기
IEC 60306-4:1971 - Measurement of photosensitive devices. Part 4: Methods of measurement for photo-multipliers 상세보기
IEC TS 63134:2020 - Active assisted living (AAL) use cases 상세보기
IEC 60034-5:2020 RLV - Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification 상세보기
KS B ISO TS 25740-1 - 에스컬레이터 및 무빙워크에 대한 안전요건 — 제1부: 세계공통 필수 안전요건(GESRs) 상세보기
KS B ISO TS 8100-21 - 승객 및 화물 운송용 엘리베이터 —제21부: 세계공통 필수안전요건(GESRs)을 충족하는 세계공통 안전 파라미터(GSPs) 상세보기
KS C IEC TS 62872 - 산업 시설과 스마트 그리드 사이의 산업 공정 측정, 제어 및 자동화 시스템 인터페이스 상세보기
KS표준
핸드북
