관심표준 등록 : 표준업데이트 시 알림을 받을 수 있습니다.
PDF : 직접 파일 다운로드 및 인쇄 (마이페이지 확인)
PRINT : 인쇄본 우편발송, 2~3일 소요(PDF파일 미제공)
분야 | TC 18 : Electrical installations of ships and of mobile and fixed offshore units |
---|---|
적용범위 | IEC 61892-2:2019 is applicable to system design of electrical installations and equipment in mobile and fixed offshore units including pipeline, pumping or "pigging" stations, compressor stations and single buoy moorings, used in the offshore petroleum industry for drilling, production, accommodation, processing, storage and offloading purposes. It applies to all installations, whether permanent, temporary, transportable or hand-held, to AC installations and DC installations, without any voltage level limitation. Referenced equipment standards may give voltage level limitations. This document specifies requirements such as those concerning – sources of electrical power for manned and unmanned units, – system earthing, both for low-voltage and high-voltage installations, – interface for electric transmission systems with power supplied from shore, between interconnected offshore units, and with power supplied by offshore units to subsea installations, – distribution systems, – cables and wiring systems, – system studies and calculations, – protection against electrical faults, – lighting, – energy control, monitoring and alarm systems, and – turret/swivel. This document gives information and guidance on topics such as – applicable examples of HVDC VSC technology, and – guidelines for illumination level. This document does not apply to – fixed equipment for medical purposes, – electrical installations of tankers, and – control of ignition sources other than those created by electrical equipment. This third edition cancels and replaces the second edition published in 2012. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) the requirement for sources of electrical power has been rewritten. Requirements both for manned and unmanned units are given. Requirements for essential services of electrical power have been added; b) the requirement in relation to dead start has been added; c) the requirement for emergency stop for motor-driven fuel-oil transfer and fuel-oil pressure pumps has been added; d) general requirements regarding cables and wiring systems have been added; e) the description of unit interfaces to electrical transmission systems has been included; f) requirements in relation to energy control, monitoring and alarm system have been rewritten; g) new clauses regarding swivel/turret and unmanned facilities have been added; h) informative annexes regarding the following have been added: – essential source of electrical power; – emergency source of electrical power; – applicable examples of HVDC VSC technologies; – swivel/turret; – power sources for unmanned units, with separate or combined main and emergency switchboard; – alternative power sources of electrical power – general requirements; – illumination level; – enhanced software simulation; – architecture for energy control, monitoring and alarm system. |
국제분류(ICS)코드 | 47.020.60 : 해양 구조물 및 선박의 전기 장비 |
페이지수 | 234 |
Edition | 3.0 |
No. | 표준번호 | 표준명 | 발행일 | 상태 |
---|---|---|---|---|
1 | IEC 61892-2:2019 | Mobile and fixed offshore units - Electrical installations - Part 2: System design | 2019-04-09 | 표준 |
2 | IEC 61892-2:2012/COR1:2013 | Corrigendum 1 - Mobile and fixed offshore units - Electrical installations - Part 2: System design | 2013-03-21 | 구판 |
3 | IEC 61892-2:2012 | Mobile and fixed offshore units - Electrical installations - Part 2: System design | 2012-03-15 | 구판 |
4 | IEC 61892-2:2005 | Mobile and fixed offshore units - Electrical installations - Part 2: System design | 2005-03-24 | 구판 |
IEC 61892-1:2019 - Mobile and fixed offshore units - Electrical installations - Part 1: General requirements and conditions 상세보기
IEC 61892-3:2019 - Mobile and fixed offshore units - Electrical installations - Part 3: Equipment 상세보기
IEC 61892-4:2019 - Mobile and fixed offshore units - Electrical installations - Part 4: Cables 상세보기
IEC 61892-5:2019 - Mobile and fixed offshore units - Electrical installations - Part 5: Mobile units 상세보기
IEC 61892-6:2019 - Mobile and fixed offshore units - Electrical installations - Part 6: Installation 상세보기
AS IEC 61511.2:2018 - Functional safety - Safety instrumented systems for the process industry, Part 2: Guidelines for the application of AS IEC 61511.1 상세보기
AS/NZS 60079.20.1:2012 - Explosive atmospheres, Part 20.1: Material characteristics for gas and vapour classification - Test methods and data 상세보기
AS 1668.2-2012 - The use of ventilation and airconditioning in buildings, Part 2: Mechanical ventilation in buildings 상세보기
AS 1324.2-2003 - Air filters for use in general ventilation and airconditioning, Part 2: Methods of test 상세보기
IEC 60079-10-1:2020 - Explosive atmospheres - Part 10-1: Classification of areas - Explosive gas atmospheres 상세보기
IEC TS 63134:2020 - Active assisted living (AAL) use cases 상세보기
IEC 60034-5:2020 RLV - Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification 상세보기
KS B ISO TS 25740-1 - 에스컬레이터 및 무빙워크에 대한 안전요건 — 제1부: 세계공통 필수 안전요건(GESRs) 상세보기
KS B ISO TS 8100-21 - 승객 및 화물 운송용 엘리베이터 —제21부: 세계공통 필수안전요건(GESRs)을 충족하는 세계공통 안전 파라미터(GSPs) 상세보기
KS C IEC TS 62872 - 산업 시설과 스마트 그리드 사이의 산업 공정 측정, 제어 및 자동화 시스템 인터페이스 상세보기